User manual YAMAHA DTXPLORER

[. . . ] DRUM TRIGGER MODULE Owner's Manual SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. Battery Notice: This product MAY contain a small non-rechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. [. . . ] Hold the [SHIFT] button and press the [SAVE/ENT] button to view page 1 in the Utility Mode. Next, press the [>] button 6 times to view the Master Tuning display shown below, then use the jog dial to adjust the tuning (-24. 0 to 0 to +24. 0). SONG =120 '¬ 2 :Demo2 Song Number Song Name 2. Listen to the Song Press the [SONG >/s] button and after the count, the song will start playback from the beginning. After the song has played to the end, it will automatically start playing from the beginning again. Press the [SONG >/s] button to stop playback. UTIL5 MasterTune ­ Tune=+18. 0 , 5. Mute the Drum Part Try playing along with the song. Hold the [SHIFT] button and press the [SONG >/s] button so that that the "°" icon appears on the lower right side in the display. This icon indicates that the drum mute function is active. Press the [SHIFT] + [SONG >/s] buttons to mute (no sound is produced) the drum part and start playback. * To return the setting to its original tempo or voice, reselect the song. * If a different song is selected during song playback, the new song will start playback from the beginning. 3. Adjust the Song's Volume and Tempo Use the [<]/[>] buttons to flash the tempo value, and then use the jog dial to set the song's playback tempo (q=30 to 300). Next, press the [>] button to move the flashing cursor to the right. The speaker icon will change to a numeric value and flash. This sets the volume for the parts other than the drum (0 to 16). Rotate the jog dial and adjust the balance between the song accompaniment and your performance. SONG =120 12 2 :Demo2 ° Now play the drum part yourself. To cancel the drum mute function, hold the [SHIFT] button and press the [SONG >/s] button again. * The drum mute function is also available during song playback. 17 Play Along With a Song! 6. Play Along with Bass Solo With the "Bass Solo" function, you can play along with just the bass part during playback. Since this function mutes the other accompaniment parts, it lets you concentrate on improving your ability to play in rhythm with the bass instrument. First, press the [SHIFT] + [SAVE/ENT] buttons to view the following display (page 1 in the Utility Mode). Tap Tempo Function With the Tap Tempo Function, you can set the song or metronome's tempo by tapping in tempo on a pad. This lets you set the tempo to one that is best for you. The [<]/[>] buttons can also be used to set the tempo instead of tapping on a pad. Procedure UTIL1 Hi-hat HHofs= 0 T= 0, 1. The Tap Tempo Setting display shown below will appear. * The Tap Tempo function can even be used during song or metronome playback. Next, press the [>] button three times to view the following display. [. . . ] Nusantik Gedung Yamaha Music Center, Jalan Jend. 4, Jakarta 12930, Indonesia Tel: 21-520-2577 CENTRAL & SOUTH AMERICA MEXICO Yamaha de Mexico S. A. 09300, México, D. F. , México Tel: 55-5804-0600 SPAIN/PORTUGAL Yamaha-Hazen Música, S. A. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 KOREA Yamaha Music Korea Ltd. [. . . ]