User manual YAMAHA DTXTREMEIISE3

[. . . ] Please proceed to the appropriate installation instructions. Windows Read pages 1 through 4 Macintosh Read pages 4 through 5 For Windows Users Contents of the CD-ROM The CD-ROM contains a variety of applications (with their installers) listed below. Folder Name USBdrv_ USBdrv2k_ SOUNDS Application Name YAMAHA USB MIDI Driver (for Windows 98/Me) YAMAHA USB MIDI Driver (for Windows 2000/XP) User voices and waveform samples Subfolders in the SOUNDS folder contain user drum kits, waveform samples, user voices and so on. n Each file name extension indicates a specific file type . DAT : Waveform data exclusively designed for DTXTREME IIs. . OKT : User kit data Contents Enables communication between the DTXTREME IIs and your computer via a USB connection. Minimum System Requirements n Depending on your particular operating system, the actual minimum requirements may be higher than those specified below. Windows Me USB MIDI Driver Computer: IBM/AT or compatible machine (with USB interface) OS: Windows 98/98SE/Me/2000/XP Home Edition/XP Professional CPU: Pentium (or Celeron)/166MHz or faster Available Memory: 32MB or more Free space in Hard Disk: 2MB or more n For information about hardware requirements other than the application above, refer to the on-line manuals of the relevant software. 4. [. . . ] When the installation is complete, the system displays "Completing the Found New Hardware Wizard. " Click [Finish]. n Some computers may take about ten seconds to show this screen after the installation is complete. 2. Select [My Computer | Control Panel | System | Hardware | Driver Signing | File Signature Verification], and check the radio button to the left of "Ignore -Install all files, regardless of file signature" and click [OK]. 3. Insert the included CD-ROM into the CD-ROM drive. Make sure the POWER switch on the DTXTREME IIs is set to OFF and use the USB cable to connect the USB terminal of the computer (or the USB hub) to the USB terminal of the DTXTREME IIs. When the DTXTREME IIs is turned on, the computer automatically displays the "Found New Hardware Wizard. " Click [Next]. 9. Restart the computer. The driver has been installed. 5. Check the radio button to the left of "Search for a suitable driver for my device. The window that appears enables you to select a location in which to install the driver. 3 For Macintosh Users Contents of the CD-ROM The CD-ROM includes two folders: "International" and "Japanese. " Double-click on the "International" folder to open it and access the various applications (with their installers) listed below. "International" folder Folder Name OMS_ USBdrv_ SOUNDS Application Name Open Music System (OMS) 2. 3. 8 YAMAHA USB MIDI Driver User voices and waveform samples (*) Contents Enables you to use several MIDI applications on the Mac OS. Enables communication between the DTXTREME IIs and your computer via a USB connection. Subfolders in the SOUNDS folder contain user drum kits, waveform samples, user voices and so on. n Each file name extension indicates a specific file type . DAT : Waveform data exclusively designed for DTXTREME IIs. . OKT : User kit data (*) Unfortunately, Yamaha makes no guarantee concerning the stability of these programs nor can it offer user support for them. · OMS® and are trademarks of Opcode Systems, Inc. Minimum System Requirements USB MIDI Driver Computer: Macintosh Computer with built-in USB port OS: Mac OS 8. 6 through 9. 2. 2 CPU: Power PC or faster Memory: 64MB or more (128MB or more is recommended) Free space in Hard Disk: 2MB or more OMS: OMS 2. 3. 3 or later (included) n Turn off virtual memory. Software Installation Open Music System (OMS) OMS allows you to use several MIDI applications on the Mac OS at the same time. 1. Double-click on the "OMS_" folder (English version only). "Install OMS 2. 3. 8" will be displayed. 2. Double-click on the "Install OMS 2. 3. 8. " OMS Setup Dialog will be displayed. 3. Execute the installation by following the directions appearing on the screen. After the installation, select <Restart>. n After the installation is complete, you may possibly encounter an error message warning that the installer did not close. In this case, go to the "File" menu and select "Quit" to close the installer. Then reboot the computer. After restarting the Macintosh, you will find the "Opcode"/"OMS Applications" folder on your computer (Hard Disk as the default). 4 USB MIDI Driver To operate the DTXTREME IIs from your computer via USB, you'll need to install the appropriate driver software. The USB-MIDI driver is software that transfers MIDI data back and forth between sequence software and the DTXTREME IIs via a USB cable. First install OMS before you install the USB-MIDI driver. Also, after installing the driver, you will need to set up OMS. For Windows/Macintosh Users About USB Driver Setup window Though the USB MIDI driver software supports (MIDI port settings) you do not need to change them since the DTXTREME IIs does not support MIDI control ports. 1. Double-click the "Install USB Driver" icon in the "USBdrv_" folder "Install USB Driver" will be displayed. 2. [. . . ] You may transfer ownership of the SOFTWARE and the accompanying written materials on a permanent basis provided that you retain no copies and the recipient agrees to the terms of the licensing agreement. 3. TERMINATION The licensing condition of the software program becomes effective on the day that you receive the SOFTWARE. If any one of the copyright laws or clauses of the licensing conditions is violated, the licensing agreement shall be terminated automatically without notice from Yamaha. In this case, you must destroy the licensed SOFTWARE and its copies immediately. 4. [. . . ]