User manual YAMAHA DVD-S2500

[. . . ] G DVD AUDIO/VIDEO SA-CD PLAYER LECTEUR DE DVD AUDIO/VIDEO SA-CD DVD-S2500 OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING Important Note DK Advarsel: Laserrudstråling ved åbning når sikkerhesafbrydere er ude af funktion. Undgå u tsættelse for stråling. Bemærk: Netafbryderen STANDBY/ON er sekundært indkoblet og afbryder ikke strømmen fra nette. Den indbyggede netdel er derfor tilsluttet til lysnettet så længe netstikket sidder i stikkontakten. [. . . ] To change the four-digit PIN, enter the current PIN first, then enter the new four-digit PIN. Enter PIN Enter the four-digit PIN to unlock the disc or to display the [Access] menu. Parental level DVD movies may contain scenes that are unsuitable for children. Therefore, some discs contain parental control information that may apply to the entire disc or to certain scenes. You can specify a country code in the On-screen menu (Setup Language Country). Choices: 0 to 8 Initial setting: 0 Country Selects a country to apply its rating system to Parental Level control. 4:3 letterbox Widescreen TV System (NTSC/PAL conversion) Allows you to select [PAL], [NTSC] or [Auto] mode to match your TV system. You can play PAL discs on NTSC monitor, and NTSC discs on PAL monitor. model), [PAL] (U. K. , Europe and Australia models). Choices: PAL, NTSC, Auto The following conversions are supported. Disc Format NTSC PAL Output format Selected mode NTSC PAL AUTO NTSC NTSC PAL PAL NTSC PAL Features PBC A VCD menu screen is displayed when this setting is on. Choices: On, Off Initial setting: On Sleeptimer Places this unit in standby mode when playback is stopped and this unit is not operate for 20 minutes. Choices: On, Off Initial setting: Off Notes: ­ In progressive scan mode, the output signals from the VIDEO and S VIDEO jacks are same as the format of the disc you play. ­ Some image distortion occurs when switching the NTSC and PAL mode. ­ If your TV does not accept the selected mode while you change the [TV System] setting, the screen will be distorted so that you cannot recognize the Onscreen menu. When it occurs, you can change the [TV System] settings by the remote control operations. · Choosing [PAL]: Press "PLAY" "2" "5" "6" "PLAY" on the remote control. · Choosing [NTSC]: Press "PLAY" "2" "5" "7" "PLAY" on the remote control. Do not perform this operation while playing back a disc on this unit. 15 On-screen menu Audio Menu Digital output Enables you to specify the type of digital output that best suits your AV receiver or HDMI monitor/receiver. Select [PCM only] if your receiver or HDMI monitor/ receiver is not capable of decoding multi-channel audio. Select [All] if you connected this unit's digital out jacks to a multi-channel decoder/receiver. Choices: Off, PCM only, All Initial setting: All Note: ­ SA-CD audio signal is not output from DIGITAL OUT jacks. Analogue output Enables you to specify the type of analog output suitable for your AV receiver. [. . . ] ­ Check that the speakers are connected correctly. ­ Check the settings menu to ensure that the digital output is set to [All] or [PCM only]. ­ Check to ensure that the audio format of the selected audio language matches your receiver capabilities. ­ Check that the SCART cable is connected to the correct device (see "Audio connection" on page 8). [. . . ]