User manual YAMAHA DVD-S2700

[. . . ] G DVD AUDIO/VIDEO SA-CD PLAYER LECTEUR DE DVD AUDIO/VIDEO SA-CD DVD-S2700 AUDIO DIRECT POWER HDMI STANDBY ON ON OFF Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A. S. T. If the fitted plug is not suitable for your jack outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] Refer to the manual supplied with your TV for details). The default screen appears on the TV. Using the remote control Use the remote control within 6 m (20 ft approx. ) of this unit and point it toward the remote control sensor. HDMI within 6m (20 ft approx. ) 13 En GETTING STARTED Step 3: Setting a TV type This unit is compatible with both NTSC and PAL video formats. Select the color system that matches your TV. Notes · Before changing the current TV Standard setting, ensure that your TV supports the selected TV type system. · If you play an NTSC-formatted disc with the [PAL] setting or a PAL-formatted disc with the [NTSC] setting, the video quality may deteriorate. 3 Press Type]. VIDEO / repeatedly to highlight [TV 1/1 16:9 PAL Off Off Field Off RGB TV Display TV Type Black Level*1 Closed Caption*1 Still Mode Progressive Scan Scart Video Out*2 Picture Setting Move : Return 1 Press SETUP. The setup menu appears. SETUP GENERAL AUDIO SPEAKER VIDEO HDMI DISC Move : DVD-Audio mode SA-CD mode OSD Language Parental Rating Parental Password Screen Saver Auto Power Off Sleep Timer Return Select : Enter 1/2 4 Press / to select one of the options below. PAL Select this if the connected TV is a PAL system TV. It will change video signals of NTSC discs and output them in PAL format. NTSC Select this if the connected TV is an NTSC system TV. It will change video signals of PAL discs and output them in NTSC format. Select : Enter 2 Press / repeatedly to select [VIDEO], and then press ENTER. [VIDEO] menu appears. VIDEO TV Display TV Type Black Level*1 Closed Caption*1 Still Mode Progressive Scan Scart Video Out*2 Picture Setting Move : Return 1/1 16:9 PAL Off Off Field Off RGB Select : Enter *1: [Black Level] and [Closed Caption] are only for U. S. A. and Europe models. 14 En GETTING STARTED Step 4: Setting a language preference You can select your own preferred language settings. This unit will automatically switch to your preferred language for you whenever you load a disc. If the language selected is not available on the disc, the default language of the disc will be used instead. The OSD (On-Screen Display) language in the system menu will remain once selected. Setting the audio, subtitle and disc menu languages 1 Press SETUP. The setup menu appears. English 2 Press / repeatedly to highlight [DISC], and then press ENTER. [DISC] menu appears. DISC 1/1 English Off English On Off 3 sec Setting the OSD (On-Screen Display) language 1 Press SETUP. The setup menu appears. AUDIO Language Subtitle Language DVD Menu Language Angle Mark PBC Time Interval 2 Press repeatedly to highlight [GENERAL], and then press ENTER. / [GENERAL] menu appears. Move : GENERAL DVD-Audio mode SA-CD mode OSD Language Parental Rating Parental Password Screen Saver Auto Power Off Sleep Timer Move : Return Return Select : Enter 1/2 DVD-Audio SA-CD English Level 8 On Mode 1 Off Select : Enter 3 Press / repeatedly to highlight [AUDIO Language] or [Subtitle Language] or [DVD Menu Language]. / 4 Press to select a language. To select the language not in the list: 1 Select [Others] under [AUDIO Language] or [Subtitle Language] or [DVD Menu Language]. 2 Press ENTER. 3 Press 4 Press / / repeatedly to highlight [OSD to select a language. 3 Use the numeric buttons (0-9) to enter the 4-digit language code (see "LANGUAGE CODE LIST" on page 36). Language]. 4 Press ENTER. 15 En DISC OPERATION DISC OPERATION 3 Press Notes · Unless otherwise specified, all operations described here are carried out using the supplied remote control. · If the inhibition icon ( or "Prohibit") appears on the TV screen when you press a button, the function for that button is not available on the current disc or at the current time. · Depending on the DVD or Video CD disc, some operations may operate differently or be restricted. · Do not push on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the disc unit to malfunction. again to close the disc tray. After recognizing the disc, this unit starts to play back automatically. · If you press PLAY ( 3) when the disc tray is opened, the disc tray closes and playback starts automatically. · Depending on the disc, the disc reading time may exceed 30 seconds due to the complexity of the directory/file configuration. 4 To stop playback, press STOP ( 7 ). "RESUME" appears in the front panel display. Basic operation GROUP PAGE MULTI 2CH 5 To resume playback, press PLAY ( 3). The disc is played back from the last stopping point. y As long as you do not eject a disc, you can resume playback even if you turn off this unit. PROG Numeric buttons (0-9) RANDOM 6 To cancel resume mode, press STOP ( 7 ) twice. Notes SLOW/SEARCH (/) PLAY ( ) REPEAT AB CLEAR SETUP STOP ENTER SLOW SEARCH PLAY PAUSE STOP ( PAUSE ( SKIP ( / ) ) ) TOP MENU SKIP · It may not be possible to play certain MP3/JPEG/DivX discs due to the configuration and characteristics of the disc or the recording conditions. · When you play a down mix prohibited disc, "NO DOWN MIX" lights in the front panel display. ON SCREEN Pausing playback 1 Press up. on the front panel to open the disc tray. 1 During playback, press PAUSE ( 8 ). Playback is paused and the sound is muted. 2 Place a disc in the disc tray with the printed side 2 Press PAUSE ( 8 ) again to select the next picture frame. 3 To resume normal playback, press PLAY ( 3). Selecting a track/chapter Press SKIP (l22 / 33l) or use the numeric buttons (0-9) to select a track/chapter number. · You can move to the top of the currently playing track/chapter by pressing SKIP (l22 ) once, and move to the previous track/chapter by pressing SKIP (l22 ) twice. [. . . ] 1 (Cinch: blue) PR/CR output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (Euroconnector) · Digital output Coaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (Cinch: orange) Optical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (IEC 60958 for CDDA/LPCM, IEC 61937 for MPEG 1/2, Dolby Digital, DTS) HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (Type A) · 2 channel analog output (L+R) . . . . . . . . . . . . 1 pair (Cinch: white/red) · 6 channel analog output Audio Front L/R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]