User manual YAMAHA E-45

[. . . ] Yamaha representative and authorized distributor contact details are also included. · Installation Guide Explains the procedure for installing the "E-45 User Voice Manager" software that is included on the supplied CD-ROM on your computer. 03 E-45 Hardware and Nomenclature 04 Connecting the E-45 to External Devices 05 Power Supply Preparation and Switching On / E-45 Performance Styles 06 Basic E-45 Operation: Score Mode 08 Basic E-45 Operation: Function Buttons 12 Layers and the Performance Modes 13 Random Mode (Layer 08--11) 14 Draw Mode (Layer 12, 13) / Bounce Mode (Layer 14) 15 Push Mode (Layer 15) / Solo Mode (Layer 16) 16 Using Blocks 18 Using the Menu 20 Menu List 22 Song Recording and Playback 23 Using Original Samples 24 The E-45 as "Interior Decoration" 26 E-45 Score Sheet 27 E-45 Specifications =About the Supplied CD-ROM In addition to a pdf manual and demo movie, the CD-ROM includes the "TENORION User Voice manager" software for Windows and Macintosh computers. = illustrations and LCD screens as shown in this manual are for instructional purposes only, and may The appear somewhat different from those on your instrument. The illustrations and LCD screens from the TNR-W are used for the instructions and descriptions in this manual. = is a registered trademark of the SD Card Association. = product incorporates and bundles computer programs and contents in which Yamaha owns This copyrights or with respect to which it has license to use others' copyrights. [. . . ] Press and hold the [R5] function button. The currently playing block will be displayed. To Copy a Single Layer While still holding the [R5] button press the lowest LED button in the lit column (the LEDs in the column will shine brighter), and then press an LED button in the column corresponding to the block you want to copy to. The current layer from the source block will be copied to the same layer in the destination block To Copy All Layers While still holding the [R5] button press the lowest LED button in the lit column twice (the LEDs in the column will shine brighter each time the button is pressed), and then press an LED button in the column corresponding to the block you want to copy to. All layers from the source block will be copied to the destination block. 2nd Brightness Level: Only the selected layer is copied. 3rd Brightness Level: All layers are copied (the entire block). =Copying via the Menu You can also copy either a single layer or all layers to a different block via the LCD Menu. Refer to "Edit Menu" in the E-45 Manual on the supplied CD-ROM. Copy this Block Block[03] Dest. Block:12 17 Using the Menu About the Menu In addition to the wide range of control available via the function and LED buttons, a number of detailed settings can be made via the E-45 menu, including tempo, clock display, SD Memory Card save/load, and many more. Menu items in the LCD display can be selected and executed by using the jog dial and [OK]/[CANCEL] buttons. Basic Menu Operation Normally, status information is showing in the LCD display. If you rotate the jog dial while the status information is showing the Main Menu will appear. Rotate the jog dial to select the desired menu item, and then press the [OK] button to go to the next display. By repeating these steps you can navigate to a desired function and execute or edit it as required. To return to the Status display, press the [CANCEL] button as many times as necessary. ÅÍÎÏ 01-Score 01 ç01/01:Photon 16:37:28 ÷ Rotate the jog dial up or down. [OK] Button [CANCEL] Button ÅÍÎÏ 01-Score 01 ç01/01:Photon 16:37:28 ÷ Status Display [Main menu] 2 Layer menu 3 Edit menu 4 Preference menu Main Menu 18 Menu Operation Example =Changing the Light Animation 1. Displays or hides the loop indicator. Layer menu Parameters that apply to the currently selected layer. Edit menu Data edit functions such as copy, clear, and reset. Preference menu Initial settings that apply to the entire instrument. 20 File menu Data file save, load, rename and delete functions. Song . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sampling file operations. Effect menu Reverb and chorus effect settings. Reverb Type . . . . . . . . . . . . . . . . . Begins operation of the specified Interior Mode. Selects the type of Interior Mode operation. Selects the type of saver operation: Power Save Mode or Interior Mode. Interior menu Settings not related to performance (clock, song playback). Saver Time . . . . . . . . . . . . . . . . . . . . Sets the amount of time that must elapse before saver operation begins. Time Signal ON/OFF . . . . . Determines whether the time signal will be played or not. Determines whether the alarm will sound or not. Saves the data in the current block for use as the time signal. Saves the data in the current block for use as the alarm. Saves the current settings as the power-on defaults. [. . . ] 9 types Transpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 types: Score, Random, Draw, Bounce, Push, Solo =Controller & Display LED Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256 Rear LED Display Points (TNR-W only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256 (No function) Function Buttons . . . . . . . . . . . . . . . . . . . [. . . ]