User manual YAMAHA EL-3

[. . . ] We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: BATTERY NOTICE: This product MAY contain a small nonrechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. [. . . ] 4) Press the RECORD button to make the Music Disk Recorder ready to record. 53 2. Select the parts for recording. Pressing the RECORD in the procedure 1) ­ 4) above turns on the all parts' LEDs in the upper left row indicating that each part is ready to record. Press the RECORD buttons for each part in the upper left row to turn off the parts you don't want to record. The PLAY/UPPER lamp in the upper right row lights up. RECORD/UPPER ­ Records the performance data of the Upper keyboard when turned on. RECORD/LOWER ­ Records the performance data of the Lower keyboard when turned on. RECORD/PEDAL ­ Records the performance data of the Pedalboard when turned on. RECORD/CONTROL ­ Records the Control data (see Outline of M. D. R. The LED lamps above the buttons indicate the record status of the parts. This example operation disables recording of the Upper part. Separate recording for Lead and/or Keyboard Percussion part: Hold down the SHIFT button and simultaneously press the appropriate button in the top row in the procedure #2. Bulk data, including Registration Memory and Registration Shift settings, Rhythm Pattern (User rhythms) and Rhythm Sequence data, and User voices, is also saved in the operation. There are two ways to record the registrations and bulk data: (1) To record only the registrations and bulk data: On the Electone, set the registrations and all other data you wish to record. 1. 2. Select the song number to which you wish to record the registrations. 3. While holding down the RECORD button, press the M (Memory) button on the Registration Memory panel. Small bars flash across the LED display from left to right, indicating that the M. D. R. is reading the registrations and other settings. is automatically stopped and returns to STOP status. M 1 2 3 4 5 6 RECORD UPPER LOWER PEDAL CONTROL UPPER PLAY LOWER PEDAL CONTROL SHIFT SONG REPEAT FROM TO SONG COPY SONG DEL. ---PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY MUSIC DISK RECORDER ­ TEMPO + FORMAT 7 8 D. 6. Music Disk Recorder (2) To record only the registrations and bulk data: 1. Set up the registrations and select the song number as you did in steps #1 and #2 above. 2. Press the RECORD button. RECORD UPPER LOWER PEDAL CONTROL UPPER PLAY LOWER PEDAL CONTROL SHIFT SONG REPEAT FROM TO SONG COPY SONG DEL. 01 PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY MUSIC DISK RECORDER ­ TEMPO + FORMAT 3. Press the PLAY button to record the registrations, then press the STOP button as soon as you see the small bars flash across the LED display from left to right. The small bars that flash across the display indicate that the M. D. R. is recording the registrations and being set up for normal recording; pressing the STOP button interrupts this process. [. . . ] Electrical/electronic products should be serviced by a qualified service person when: a. The power supply cord has been damaged; or b. Objects have fallen, been inserted, or liquids have been spilled into the enclosure through openings; or c. The product has been exposed to rain; or d. [. . . ]