User manual YAMAHA ELS01CE4

[. . . ] ELS-01/01C Version 1. 6 New Functions Yamaha has updated the firmware of the ELS-01/01C as Version 1. 6. This version provides additional functions and has some changed LCDs. This manual provides the instructions for new functions. [. . . ] For example, combining a part of one protected song with another protected song is not allowed. Moving a Protected Song This function lets you move a Protected Song to another folder or another SmartMedia card by using the [SONG COPY] button. Although the [SONG COPY] button is used here, the song will not actually be copied; it will only be moved. The procedure is the same as that of the Song Copy operation. See page 118 of the Owner's Manual. Reference Page About Protected Songs (page 121) ELS-01C Song Icon Note that there is a new icon for songs created with the ELS-01C. Indicates a song that has been created with the ELS-01C or the ELS01X. Storage Media for Protected Songs On the ELS-01/01C version 1. 6 or later, it is possible to save protected songs to USB flash memory. ELS-01/01C Version 1. 6 New Functions 3 Rhythm Sequence Program Programming Next Regist in Registration Sequence Reference Pages Next Regist Settings (page 109) Programming a Registration Sequence (page 175) You can program the Next Regist function in Registration Sequences. Using this function, the next registration data in current song can be loaded automatically just by playing the rhythm sequence. Registration Sequence display NOTE If you are loading a Registration while a rhythm is playing, the sequence data and User rhythms in the Registration data cannot be loaded. 1 2 1 SET For replacing a Registration number (or Next Regist) at the cursor position to Next Regist. This button is useful when you want to change the timing of the Next Regist function. For details, see next page. 2 INSERT For entering Next Regist data in the Registration Sequence. Entering Next Regist NOTE Although you move the cursor to the Next Regist mark in the display, the next registration data will not be loaded. 1 2 Using the buttons in the display or the Data Control dial, set the Bar/Beat/Clock position at which you want to enter the Next Regist (1 beat = 96 clock). Press the NEXT REGIST [INSERT] button in the display. The Next Regist mark ( ) appears in the display in the timing you set in step #1, indicating that the Next Regist is entered. 4 ELS-01/01C Version 1. 6 New Functions Editing an Existing Next Regist You can move the entered Next Regist, or delete the Next Regist from the sequence. To move an entered Next Regist: 1 2 3 1 2 Move the cursor and select the Next Regist you want to move. Change the position by pressing the Bar/Beat/Clock buttons in the display. Press the NEXT REGIST [SET] button in the display. The Next Regist position is changed and displayed in the proper order. To erase an entered Next Regist: Move the cursor and select the Next Regist you want to delete. Press the [DELETE] button to delete the Next Regist. Next Regist Loading Time · Loading Next Regist may take a few seconds (the time may differ depending on the size of the data to be loaded). · When using a floppy disk instead of SmartMedia card, the loading time will be longer than when using SmartMedia. · Next Registration data can be loaded by two ways: using right footswitch and programming Next Regist in the Registration Sequence. Loading time is the same regardless of which way you load the Next Registration data. ELS-01/01C Version 1. 6 New Functions 5 Internet Direct Connection Confirming the Connection You can confirm the wireless LAN connection and the condition of accessing websites. 1 2 1 Wireless LAN indicator When you connect the Electone to Internet using wireless LAN, an icon indicating the condition of the connection is displayed. If the signal to the Electone becomes weak or there is no signal from the access point, move the Electone nearer to the access point. [. . . ] It shows the access points near the Electone. Once you select the desired access point and press the [OK] button, a message appears prompting confirmation of whether to transfer the access point settings to the Electone or not. When you select [YES], the SSID, Channel and Encryption settings are transferred to the Electone. ELS-01/01C Version 1. 6 New Functions 7 U. R. G. , Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2005 Yamaha Corporation [. . . ]