User manual YAMAHA GQ1031

[. . . ] For details on new features, see "New Features for Version 3. 10" below. Please also refer to the "Operation Manual" that comes with your Disklavier control unit. You can also download or view the PDF file of the manual at the Yamaha Manual Library website: http://www. yamaha. co. jp/manual/english/ New Features for Version 3. 10 Following are the new features in Version 3. 10: · Expanded timer play settings · Enhanced audio input and output settings · Shortcut feature · Brightness adjustment for the display · Passcode setting First, update your Disklavier following the procedures in "Update Manual. " The update process takes approximately 20 minutes. English 2 Advanced Song Playback Using the Timer Play [SETUP] "TimerPlay" You can program your Disklavier to start or stop playback of a song at various specified times. All you need to do is register up to a maximum of 99 timer settings, and your Disklavier will perform them unattended. This function is called "timer play. " The following functions are available in Version 3. 10. The functions you can set for the timer play have been expanded. =TimerPlay= -+ >TimerPlay=ON 01[### ##:## PLAY -----] The following functions are available: PLAY STOP RND OFF Starts playback of songs. [. . . ] Playlists (01 - 99) created in the internal flash memory. The last DisklavierRadio channel you have listened to. Current selected song. Note: You cannot select "Radio" if you select "RND" for the function. Note: When "Radio" is selected, the Disklavier will connect to the Internet one minute prior to the time you have set, and the channel selection screen appears. DisklavierRadio will begin to play at the designated time. Continued on next page English 3 Advanced Song Playback You can set the day when the timer play function operates. =TimerPlay= _?=]-+ >TimerPlay=ON 01[M-F ##:## PLAY Mem01] The following day settings are available: ALL MON TUE WED THU FRI SAT SUN M-F M-S The timer play functions on every day of the week. The timer play functions only on Monday. The timer play functions only on Tuesday. The timer play functions only on Wednesday. The timer play functions only on Thursday. The timer play functions only on Friday. Adjusts the volume balance among the different sound sources (tone generator or audio). POWER Turns on and off the Disklavier. When functions other than "POWER" are selected, the detailed setting parameter appears. 5 Press [ ] to move the cursor to the detailed setting parameter, then press [+/YES] and [­/NO] to select the desired setting. You can set two sets of parameters depending on the function you have selected. =Shortcut= _?=]-+ 3[----] 4[PLAY Mem02 --- ] When "PLAY" is selected: Option 1 Mem01 Mem99 Option 2 --001 - 999 Lst01 Lst99 --001 - 999 Description Starts playback from the first song in the album selected for option 1. Starts playback from the song selected for option 2 in the album selected for option 1. Starts playback from the first song in the playlist selected for option 1. Starts playback from the song selected for option 2 in the playlist selected for option 1. Continued on next page English 8 Other Settings When "RPT" is selected: Option 1 Mem01 Mem99 Option 2 --Description Starts repeat playback of all songs in the album selected for option 1 from the first song. Starts repeat playback of the song selected for option 2 in the album selected for option 1. Starts repeat playback of all songs in the playlist selected for option 1 from the first song. Starts repeat playback of the song selected for option 2 in the playlist selected for option 1. 001 - 999 Lst01 Lst99 --- 001 - 999 When "RND" is selected: Option Mem01 Mem99 Lst01 Lst99 Description Starts playback of songs in the selected album at random. Starts playback of songs in the selected playlist at random. When "RADIO" is selected: Option CH01 CH99 Description Starts playback of the selected DisklavierRadio channel. When "BLNC" is selected: Option 1 TG AUDIO Option 2 UP DOWN UP DOWN Description Raises the volume of the tone generator. Lowers the volume of the tone generator. [. . . ] Lowers the volume of the audio. When "POWER" is selected: Details settings are not required. 6 Press [ENTER] to complete the operation. Continued on next page English 9 Other Settings Using the Shortcut Holding the green button on the remote control, press the corresponding number button on the number keypad to execute the assigned function. + Hold Adjusting the Brightness of the Display [SETUP] "Display" You can adjust the brightness of the display. You can also set the display to dim after a certain amount of time has elapsed without someone operating the instrument. 1 Press [SYSTEM] on the remote control. The system menu screen appears. =SYSTEM MENU= (1/2)] *Clock Adj. *TimeZone *Backup *Restore 2 Select "Display" with the cursor buttons ([ [ ]), then press [ENTER]. =SYSTEM MENU= _(2/2) *Language *Maintenance *Display The display setting screen appears. ][ ][ ] =Display= ?=-+ENT *Brightness=100% *Dim light=OFF Continued on next page English 10 Other Settings 3 Press [+/YES] and [­/NO] to change the brightness. =Display= ?=-+ENT *Brightness=80% *Dim light=OFF The following brightness settings are available: 40%, 60%, 80%, 100%. 4 To set the time for the display to dim, press [ ] to move the cursor to the dim light parameter, then press [+/YES] and [­/NO]. =Display= ?=-+ENT *Brightness=100% *Dim light=1min. The following time settings are available: OFF, 1min, 2min, 3min, 5min, 10min, 15min, 30min, 45min, 60min. If there is no operation for the time set above, the display dims to half the brightness of its original setting. Note: The brightness of the display will return to its original setting when you press any buttons, insert media, or eject media. 5 Press [ENTER] to complete the operation. Setting the Passcode to Prevent Unauthorized Access [SETUP] "Passcode" You can enter the 4-digit passcode to prevent unauthorized access from the commercially available external remote controller, or you can also set the MAC address of the external remote controller to allow it to access your Disklavier without entering the passcode. Note: These settings are not required for the use of the remote control of this unit. [. . . ]