User manual YAMAHA HTIB-106

[. . . ] GB NS-P1 10 NS-P1 16 (NS-P110/NS-P116: NX-E130 + NX-C130 + SW-P130) HOME CINEMA 5. 1CH SPEAKER PACKAGE HOME CINEMA 6. 1CH SPEAKER PACKAGE 5. 1 SYSTEME D'ENCEINTES HOME CINEMA 6. 1 SYSTEME D'ENCEINTES HOME CINEMA OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING Thank you for selecting this YAMAHA NS-P110/NS-P116 Speaker Package. English CAUTION: Read this before operating your unit. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install the speakers in a cool, dry, clean place ­ away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). [. . . ] Note There may be a case that you cannot obtain enough superbass sounds from the subwoofer when listening in the center of the room. This is because "standing waves" have been developed between two parallel walls and they cancel the bass sounds. In such a case, face the subwoofer obliquely to the wall. It also may be necessary to break up the parallel surfaces by placing bookshelves etc. Longterm use and vibrations may cause the speakers to fall. To avoid accidents resulting from tripping over loose speaker cables, fix the cables to the wall. Select an appropriate position on the wall to mount the speaker so that no one will injure his/her head or face. SPS-80 * The SPS-80 is not available in some areas. E-5 Placing the front/rear speakers (and rear center speaker for NSP116) When placing the speakers on a flat surface, attach the included nonskid pads to the corners on the bottom of the speakers as shown on the left. This prevents the speakers from sliding around. Nonskid pad * For NS-P116, the nonskid pads include four spare ones. If you want to mount a speaker on a commercially available speaker stand for the front/rear speakers (and rear center speaker for NS-P116) The following optional accessories are needed for mounting the speakers on commercially available speaker stands. * Inquire at your authorized YAMAHA dealer for the optional accessories. Mounting bracket (AAX34790) Screw (AAX12390) <NS-P110> X4 <NS-P116> X5 <NS-P110> X4 <NS-P116> X5 1 Mounting bracket (AAX34790) Attach the bracket (AAX34790) to the bottom of the speaker by using the screw (AAX12390) so that the convex part of the bracket fits in the grooved part on the bottom of the speaker as shown on the left. Mount the speaker on the speaker stand by using a pair of screw holes (at an interval of 60 mm) on the bracket. * Those screw holes can be used with M4 screws only. 2 Screw (AAX12390) 60 mm E-6 English CONNECTIONS Caution: Plug in the subwoofer and other audio/video components after all connections are completed. An example of basic connections Front speakers Right Left Right Rear speakers Left FRONT R REAR R Amplifier FRONT R FRONT L FRONT L REAR R R FRONT L SPEAKERS R REAR (SURROUND) L A B SUB WOOFER OUTPUT CENTER REAR CENTER CENTER Subwoofer VOLUME 0 AUTO STANDBY HIGH LOW OFF 10 INPUT /MONO /MONO INPUT2 POWER ON OFF To AC outlet Center speaker Rear center speaker (for NS-P116) CENTER REAR C REAR C REAR L REAR L E-7 Connect the front, center and rear speakers (and rear center speaker for NS-P116) to the speaker output terminals of your amplifier with the provided speaker cables. * The provided speaker cables have labels marked FRONT L, FRONT R, CENTER, REAR L, REAR R (and REAR C for NS-P116). Connect each speaker cable to the corresponding speaker by following the figure on page 7. (The speaker cables marked FRONT L/R are used for connecting the front speakers to the FRONT speakers' terminals on the amplifier. ) * Connect each speaker making sure not to reverse the polarity (+, ­). If the speaker is connected with reversed polarity, the sound will be unnatural and lack bass. * For the front and rear speakers only, connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals. Connect the subwoofer to the line output (pin jack) terminal(s) of the amplifier. * To connect with a YAMAHA DSP amplifier (or AV receiver), connect the SUBWOOFER (or LOW PASS etc. ) terminal on the rear of the DSP amplifier (or AV receiver) to the L/MONO INPUT terminal of the subwoofer. * To connect the subwoofer to the SPLIT SUBWOOFER terminals on the rear of the DSP amplifier, connect them to both the left L/MONO and right R INPUT terminals of the subwoofer. Note When connecting to a monaural line output terminal of the amplifier, connect to the L/MONO INPUT terminal. How to connect speaker cables For connections, keep the speaker cables as short as possible. Do not bundle or roll up the excess part of the cables. If the connections are faulty, no sound will be heard from the speakers. [. . . ] Full range acoustic-suspension speaker system Magnetic shielding type Driver . . . . . . . . . . . . . . . . . . . . . . . . 5 cm (2") full range cone speaker x 2 Nominal Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30W Maximum Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100W Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]