User manual YAMAHA HTR-5490

[. . . ] U HTR-5490 AV Receiver IMPORTANT Please record the serial number of this unit in the space below. MODEL: Serial No. : The serial number is located on the rear of the unit. Retain this Owner's Manual in a safe place for future reference. OWNER'S MANUAL SAFETY INSTRUCTIONS 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 11 · Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] It recreates the most complete movie sound design in your audio room. In CINEMA-DSP sound field programs, YAMAHA's exclusive DSP processing is added to the right and left Main and Center channels, so the listener can enjoy realistic dialogue, depth of sound, smooth transition between sound sources, and a surround sound field that goes beyond the screen. When a DTS or Dolby Digital signal is detected, the CINEMA-DSP sound field processor automatically chooses the most suitable sound field program for that signal. L SURROUND SOUND FIELD PRESENCE SOUND FIELD DIALOG EFFECT MUSIC R SURROUND SOUND FIELD In addition to the DSP, this unit is equipped with various precise decoders; Dolby Pro Logic/Pro Logic /DTS Neo: 6 decoder for 2-channel sources, Dolby Digital/DTS decoder for multi-channel sources and Dolby Digital Matrix 6. 1 or DTS ES decoder for a rear center channel. You can select the CINEMA-DSP program to optimize these decoders and the DSP sound patterns depending on the input source. 32 CINEMA-DSP The 6-channel soundtracks found on 70-mm film produce precise sound field localization and rich, deep sound without using matrix processing. This unit's MOVIE THEATER programs provide the same quality of sound and sound localization that 6-channel soundtracks do. The built-in Dolby Digital or DTS decoder brings the professional-quality sound designed for movie theaters into your home. With this unit's MOVIE THEATER programs, you can recreate a dynamic sound that gives you the feeling of being at a public theater in your listening room by using Dolby Digital or DTS technology. INTRODUCTION I Dolby Digital/DTS + DSP sound field effect Presence DSP sound field These programs use YAMAHA's tri-field DSP processing on each of the Dolby Digital or DTS signals for the front, left surround and right surround channels. This processing enables this unit to reproduce the immense sound field and surround expression of a Dolby Digital- or DTSequipped movie theater without sacrificing the clear separation of all channels. Right surround DSP sound field PREPARATION Left surround DSP sound field I Dolby Digital Matrix 6. 1/DTS ES + DSP sound field effect These programs provide you with the maximum experience of the spacious surround effects since an extra rear center DSP sound field created from the rear center channel is added. BASIC OPERATION I Dolby Pro Logic + DSP sound field effect Presence DSP sound field Surround DSP sound field Most movie software has 4-channel (left, center, right and surround) sound information encoded by Dolby Surround matrix processing and stored on the left and right tracks. These signals are processed by the Dolby Pro Logic decoder. The MOVIE THEATER programs are designed to recreate the spaciousness and delicate nuances of sound that tend to be lost in the encoding and decoding processes. ADVANCED OPERATION I Dolby Pro Logic ADDITIONAL INFORMATION /DTS Neo: 6 Dolby Pro Logic and DTS Neo: 6 equipped on this unit decode the 2-channel Dolby Surround software into five discrete full-range channels (3 channels in front and 2 or 3 channels in rear). They also provide two modes; MOVIE/ CINEMA for movies and MUSIC for 2-channel source. APPENDIX English 33 CINEMA-DSP CINEMA-DSP Programs I For moive programs: No. 8 to 10 According to the input signal format, this unit automatically chooses the appropriate decoder and DSP sound field pattern. Table of Program Names for Each Input Format Input 2 channel Stereo No. 8 Program MOVIE THEATER 1 70 mm Spectacle 70 mm Sci-Fi 9 MOVIE THEATER 2 70 mm Adventure 70 mm General 10 DOLBY DIGITAL -- -- DTS DIGITAL SUR -- DGTL Spectacle DGTL Sci-Fi DGTL Adventure DGTL General Normal Enhanced -- DTS Spectacle DTS Sci-Fi DTS Adventure DTS General -- -- Normal Spectacle 6. 1 Sci-Fi 6. 1 Adventure 6. 1 General 6. 1 Matrix 6. 1 Enhanced 6. 1 -- Spectacle ES Sci-Fi ES Adventure ES General ES -- -- ES Matrix 6. 1 ES Discrete 6. 1 *2 Enhanced ES -- -- -- -- -- -- 5. 1 channel DOLBY DIGITAL DTS 6. 1 channel *1 DOLBY DIGITAL DTS ES -- PRO LOGIC Normal Enhanced PRO LOGIC Movie Music DTS Neo: 6 Cinema Music -- -- -- -- -- -- -- Enhanced -- -- -- -- -- -- -- -- -- -- -- -- -- *1 means the 6. 1 /ES Matrix decoder is ON. *2 means the DTS ES software encoded with Discrete 6. 1 is input. y · If a Dolby Digital signal or DTS signal is input when the input mode is set to AUTO, the DSP program will be automatically switched to the Dolby Digital playback sound field or DTS playback sound field. · If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the 6. 1/ES button on the remote control, the Dolby Digital Matrix 6. 1 or DTS ES decoder will automatically turn on and the corresponding DSP program will be selected. · 6. 1/ES on the remote control can be used to play Dolby Digital or DTS 5. 1 channel sources with rear center speaker. In this case the program name changes to the corresponding name for 6. 1 channel. · When playing 6. 1 channel source with 6. 1/ES on the remote control off, the program name changes to the corresponding name for 5. 1 channel. Note · The " " indicator does not light up when selecting the program No. 10 except for the Enhanced mode. 34 CINEMA-DSP The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. Note INTRODUCTION · Select the DSP program that you feel sounds best regardless of the name and description given for it below. 8 Program MOVIE THEATER 1 Spectacle Features This program creates the extremely wide sound field of a 70-mm movie theater. [. . . ] 2 (Total 50 W maximum) [Australia model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (100 W maximum) · Dimension (W x H x D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435 x 171 x 432 mm (17-1/8" x 6-3/4" x 17") · Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 kg (33 lbs) · Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]