User manual YAMAHA HTR5630

[. . . ] U HTR-5630 AV Receiver OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 11 · Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 12 13 1 2 3 4 5 6 7 8 9 Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. [. . . ] · The acoustics of your listening room affect the DSP program. Minimize the sound reflections in your room to maximize the effect created by the program. · When you select an input source, this unit automatically selects the last DSP program used with that source. · When you set this unit in standby mode, it stores the current source and DSP program in memory and automatically selects them when you turn on the power again. · If the unit receives a Dolby Digital or DTS signal when the input mode is set to AUTO, the DSP program (No. 7­9) automatically switches to the appropriate decoding program. · When the unit is reproducing a monaural source with PRO LOGIC or PRO LOGIC/Enhanced, or PRO LOGIC II Movie, no sound is output from the main and rear speakers. Sound can only be heard from the center speaker. (If "1A CENTER" on the set menu is set to NON, the center channel sound is output from the main speakers. ) RR LCR LFE RL y · You can also select DSP program by pressing PROGRAM l / h on the front panel. · Select a program based on your listening preference. Program names are just for reference. 24 PLAYBACK I Selecting PRO LOGIC or PRO LOGIC II You can listen to 2-channel sources decoded into five discrete channels by selecting PRO LOGIC or PRO LOGIC II in program No. 9. The display cycles as follows each time you press q/ DTS: PRO LOGICPRO LOGIC EnhancedPRO LOGIC II MoviePRO LOGIC II MusicPRO LOGIC. . . . y VOLUME PRESET/TUNING FM/AM · You can select PRO LOGIC, PRO LOGIC Enhanced, PRO LOGIC II Movie, and PRO LOGIC II Music by pressing PROGRAM l / h on the front panel repeatedly. STANDBY /ON EDIT TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM INPUT MODE 6CH INPUT SILENT SPEAKERS ON A STEREO PROGRAM A/B/C/D/E PRESET/TUNING CONTROL BASS/TREBLE INPUT I Playing Dolby Digital EX or DTS ES material Press 6. 1/5. 1 to turn on the Dolby Digital + Matrix 6. 1 or DTS + Matrix 6. 1 decoder. 6. 1/5. 1 OFF PHONES B EFFECT NEXT SET MENU PROGRAM l / h +10 AMP TV 2 + VOL + CH + VOLUME (Example) VCR MATRIX ­ MUTE ­ INPUT ­ MUTE V-AUX D-TV/CBL DVD MD/CD-R TUNER CD VOLUME HALL 1 MUSIC 5 /DTS 9 LEVEL JAZZ 2 ROCK 3 ENTERTAINMENT 4 MOVIE2 8 Matrix 6. 1 3 LCR LFE RL RR TV THTR MOVIE1 6 NIGHT 0 7 6. 1/5. 1 +10 BASIC OPERATION STEREO ENTER SET MENU 1 2 3 Select a 2-channel source and start playback on the source component. Press AMP. AMP Press q/DTS. HALL 1 MUSIC 5 /DTS 9 JAZZ 2 ROCK 3 ENTERTAINMENT 4 MOVIE2 8 STEREO ENTER TV THTR MOVIE1 6 NIGHT 0 7 6. 1/5. 1 +10 The display changes AUTO Matrix6. 1 OFF each time 6. 1/5. 1 is pressed. AUTO: This mode automatically switches Dolby Digital + Matrix 6. 1 and DTS + Matrix 6. 1 depending on the signal. Virtual rear center speaker does not work for 5. 1 channel sources. Matrix 6. 1: This setting produces 6-channel playback of the input source using the Matrix 6. 1 decoder. The virtual rear center speaker can be used when playing a 5. 1-channel source. OFF: Virtual rear center speaker does not work in this setting. Notes · Some 6. 1-channel compatible discs do not have a signal (flag) that this unit can automatically detect. Select "Matrix 6. 1" to play these kinds of discs with 6. 1-channel sound. · 6. 1-channel playback is not possible even if you press 6. 1/5. 1 in the following cases: 1 When effects are turned off. 2 When the source connected to the 6CH INPUT jacks is being played. 3 When the unit is reproducing a Dolby Digital KARAOKE source. [. . . ] 300 µV/m GENERAL · Power Supply [U. S. A. and Canada models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V/60 Hz [Australia model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 240 V/50 Hz [U. K. , Europe and Singapore models] . . . . . . . . . . . . . . . . [. . . ]