Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual YAMAHA HY10GIII. We hope that this YAMAHA HY10GIII user guide will be useful to you.
Lastmanuals help download the user guide YAMAHA HY10GIII.
Detailed instructions for use are in the User's Guide.
[. . . ] Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following: Do not place the device in an unstable position where it might accidentally fall over. Do not place the device in a location where it may come into contact with corrosive gases or salt air. [. . . ] - Choose mounting hardware and an installation location that can support the weight of the device. Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum. Use of other types of cables may result in fire. Do not insert your fingers or hands in any gaps or openings on the device. Do not operate the device if the sound is distorting. Prolonged use in this condition could cause overheating and result in fire. Select a suitable power amplifier for use with this device (see SPECIFICATIONS). Each connection should follow correct polarity, i. If polarity is crossed between speakers, specified performance may not be achieved. Strip approximately 15 mm (5/8) of insulation from the end of each speaker cable and tightly twist the exposed stranded wire. Angle the speaker for ease of connection, and then secure firmly with the retaining knobs. Before performing connections, ensure the retaining knobs are secure enough to prevent the speaker falling and causing injury. # Insert each stranded wire under its respective screw, and then tighten down. For parallel connection to the next speaker, use the outer input terminals. $ Select the line voltage/impedance (100V/70V/8) and power tap for 100V/70V line distributed system by rotating the tap selector switch with a slot-head screwdriver. [. . . ] $ Select the line voltage/impedance (100V/70V/8) and power tap for 100V/70V line distributed system by rotating the tap selector switch with a slot-head screwdriver. the "X" position should not be used. The 8 position should be used for 8 ohm audio systems only. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA HY10GIII
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA HY10GIII will begin.
