User manual YAMAHA JA-BF1

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual YAMAHA JA-BF1. We hope that this YAMAHA JA-BF1 user guide will be useful to you.

Lastmanuals help download the user guide YAMAHA JA-BF1.

Download

Manual abstract: user guide YAMAHA JA-BF1

Detailed instructions for use are in the User's Guide.

 [. . . ] CONTROL CHANGE
Data format: [BnH]  [cc]  [vv]
BnH = Control change (n = channel number) cc = Control number vv = Data Range (1) Bank Select ccH Parameter Data Range (vvH) 00H Bank Select MSB 00H:Normal 20H Bank Select LSB 00H. . . 7FH Bank selection processing does not occur until receipt of next Program Change message. (2) Main Volume ccH Parameter 07H Volume MSB Data Range (vvH) 00H. . . 7FH

(3) Local Control (reception only) ccH Parameter Data Range (vvH) 7AH Local Control 00H (off),  7FH (on) (4) All Notes Off ccH Parameter Data Range (vvH) 7BH All Notes Off 00H Switches OFF all the notes that are currently ON on the specified channel. Any notes being held by the damper or sostenuto pedal will continue to sound until the pedal is released. (5) Omni Off (reception only) ccH Parameter Data Range (vvH) 7CH Omni Off 00H Same processing as for All Notes Off.  [. . . ] (6) Omni On (reception only) ccH Parameter Data Range (vvH) 7DH Omni On 00H Same processing as for All Notes Off. (7) Mono (reception only) ccH Parameter Data Range (vvH) 7EH Mono 00H Same processing as for All Sound Off. (8) Poly (reception only) ccH Parameter Data Range (vvH) 7FH Poly 00H Same processing as for All Sound Off. · When Control Change is turned OFF,  Control Change messages will not be transmitted or received. · Local on/off,  OMNI on/off are not transmitted. (The appropriate note off number is supplied with "All Note Off" transmission). · When a voice bank MSB/LSB is received,  the number is stored in the internal buffer regardless of the received order,  then the stored value is used to select the appropriate voice when a program change message is received. This mode will not change when the instrument receives MONO/POLY mode message. 

(3) Expression (reception only) ccH Parameter Data Range (vvH) 0BH Expression MSB 00H. . . 7FH (4) Damper ccH Parameter 40H Damper MSB (5) Sostenuto ccH Parameter 42H Sostenuto (6) Soft Pedal ccH Parameter 43H Soft Pedal Data Range (vvH) 00H. . . 7FH Data Range (vvH) 00H-3FH:off,  40H-7FH:on Data Range (vvH) 00H-3FH:off,  40H-7FH:on

(7) Effect1 Depth (Reverb Send Level) ccH Parameter Data Range (vvH) 5BH Effect1 Depth 00H. . . 7FH Adjusts the reverb send level. 
(8) Effect4 Depth (Variation Effect Send Level) ccH Parameter Data Range (vvH) 5EH Effect4 Depth 00H. . . 7FH (9) RPN 65H RPN MSB 64H RPN LSB 06H Data Entry MSB 26H Data Entry LSB 60H Data Increment 61H Data Decrement * Parameters that are controllable with RPN · Coarse Tune · Fine Tune · Pitch Bend Range

2

JA-BF1 Data List / Daten-Liste / Liste des données / Lista de datos

4. PROGRAM CHANGE
Data format: [CnH]  [ppH]
CnH = Program event (n = channel number) ppH = Program change number P. C. #=Program Change number
Voice Name Grand Piano 1 Grand Piano 2 E. Piano Harpsichord Church Organ Strings MSB 0 0 0 0 0 0 LSB 122 112 122 122 123 122 P. C. # 1 1 6 7 20 49

7. When the XG System On message is received,  the MIDI system will be reset to its default settings. The message requires approximately 50ms to execute,  so sufficient time should be allowed before the next message is sent. (2) XG Native Bulk Data (reception only)

Data format: [F0H]  [43H]  [0nH]  [4CH]  [aaH]  [bbH]  [hhH]  [mmH]  [llH]  [ddH] . . . [ccH]  [F7H]
F0H = Exclusive status 43H = YAMAHA ID 0nH = When received,  n=0~F. 4CH = Model ID of XG aaH = ByteCount bbH = ByteCount hhH = Address High mmH = Address Mid llH = Address Low ddH = Data | | | | ccH = Check sum F7H = End of Exclusive · Receipt of the XG SYSTEM ON message causes reinitialization of relevant parameters and Control Change values. Allow sufficient time for processing to execute (about 50 msec) before sending this instrument another message. · XG Native Parameter Change message may contain two or four bytes of parameter data (depending on the parameter size). · For information about the Address and Byte Count values,  refer to Table 1 below. Note that the table's Total Size value gives the size of a bulk block.  [. . . ] Note that the table's Total Size value gives the size of a bulk block. Only the top address of the block (00H,  00H,  00H) is valid as a bulk data address. 

vvH 00H : off 01H : ­ 02H : 2/4 03H : 3/4 04H : 4/4 05H : 5/4 06H : 6/4 7FH : No accent Channel Detune ch: 00H-0FH 43H (Sets the Detune value for each channel) 00H-7FH Voice Reserve ch: 00H-0FH 45H 00H : Reserve off 7FH : on* * When Volume,  Expression is received for Reserve On,  they will be effective from the next Key On. Reserve Off is normal. 

Control Metronome

11. SYSTEM EXCLUSIVE MESSAGES (Others)
Data format: [F0H]  [43H]  [1nH]  [27H]  [30H]  [00H]  [00H]  [mmH]  [llH]  [ccH]  [F7H]
Master Tuning (XG and last message priority) simultaneously changes the pitch of all channels.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA JA-BF1

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA JA-BF1 will begin.