User manual YAMAHA KX-M5

[. . . ] UCAB KX-M5 Cassette Deck Platine Cassette OWNER'S MANUAL MODE D'EMPLOI SAFETY INSTRUCTIONS 6A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 7 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. · Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 8 9 10 11 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. 12 13 IMPORTANT! [. . . ] Doing so may not only scratch or damage the head's mirror-smooth finish, but also change the magnetic characteristics of the heads, causing a deterioration in reproduction quality. Although the record/playback head used in this unit is a high quality head with outstanding reproduction characteristics, it can become dirty through the use of old tapes or from dust accumulation over time. This can have a serious effect on reproduction quality. Clean the heads regularly with one of the commonly available head cleaners or with cleaning solutions as explained later in this manual. English · · · · · · · · · · · · · WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. /HAUT-PARLEUR SUBWOOFER R ANTENNA DIGITAL OUT SYSTEM CONNECTOR 8 + R ­ ­ L + OUT 2 CD TAPE OPTICAL MD E-5 Playing CDs GETTING STARTED Using the remote control transmitter of the CRX-M5 You can operate the unit with the remote control transmitter of the CRX-M5 when you connect the unit and the CRX-M5 with the system cable. Operating buttons work as follow: Buttons for operation of the unit POWER / TIMER CLOCK SET Turning on/off the unit STANDBY/ON STANDBY/ON DOLBY NR MODE REC MUTE REC/ PAUSE TUNING TIME REP EDIT FM/AM ST/MONO DISC 1 MEMORY PGM PRESET 2 3 / TUNER CD 1 2 3 4 5 6 REC/ PAUSE / 7 REC/ MUTE 8 CD SYNC 9 0 +10 TAPE MD 3: To play back 2: To playback bottom side 7: To stop playback 1/¡: To searching, fastforward, and rewind REC/PAUSE: To recording REC MUTE: To make the nonrecorded portion After connecting the AC power cord to the wall outlet, press the STANDBY/ON switch on the front panel to turn on/off the unit. When you turn off the CRX-M5, the unit turns off automatically as it is connected to the CRX-M5 with the system cable. INPUT SLEEP MUTE VOLUME ­ + For more details on the remote control transmitter, see the instructions of the CRX-M5. E-6 Getting Started Playing CDs OPERATIONS Playback You can use any type of tape, TYPE I (normal), TYPE II (CrO2), or TYPE IV (metal), since the unit automatically detects the tape type. DOLBY NR MODE ) 4 5 Press ) to close the tape tray. Press DOLBY NR to set the DOLBY NR* function to ON (DOLBY NR indicator lights up) or OFF (DOLBY NR indicator goes out). OFF: For a tape recorded with DOLBY NR OFF. ON: For a tape recorded with DOLBY NR ON. English 6 STANDBY/ON DOLBY NR MODE REC MUTE REC/ PAUSE Press MODE to select the reverse mode. Each time you press MODE, the reverse mode changes and the corresponding MODE indicator lights up as follows: : One side of the tape is played back. : Both sides of the tape are played back. STANDBY/ON 2 73 POWER / TIMER CLOCK SET TUNING TIME REP EDIT FM/AM ST/MONO DISC : Both sides of the tape are played back repeatedly. 3 / 1 MEMORY PGM PRESET 2 TUNER CD 1 2 3 4 5 7 0 6 REC/ PAUSE / 7 REC/ MUTE 8 CD SYNC 9 Press 3 to start play. Selected tape direction indicator lights up. 7 +10 TAPE 3 VOLUME MD * DOLBY NR (Dolby Noise Reduction) is an extremely effective method of reducing undesirable background hiss on tapes. The unit incorporates the DOLBY B NR system. INPUT SLEEP MUTE 2 ­ + To stop play Press 7. To eject a tape Press ) to open the tape tray and remove the tape from the tray. 1 2 3 Press STANDBY/ON to turn on the unit and CRX-M5. Set the CRX-M5 to cassette deck function mode. Press ) to open the tape tray and place a recorded tape on the tray. To adjust the volume level Use the volume control of the CRX-M5. With the side you want to play facing up E-7 OPERATIONS When you connect the unit to the CRXM5 · You can switch from another source to the tape deck just by pressing 3 or 2 (One touch play). · Using the timer function on the CRX-M5, you can play or stop a tape at a prefer time. For details, refer the instructions of the CRX-M5. · When you turn off the CRX-M5, the unit turns off automatically. Recording You can use a TYPE I (normal) or TYPE II (CrO2) tape for recording. DOLBY NR MODE ) STANDBY/ON DOLBY NR MODE REC MUTE REC/ PAUSE To fast-forward or rewind the tape Press ¡ or 1 to fast-forward the tape or rewind the tape during stop mode. REC/PAUSE 2 STANDBY/ON REC MUTE 3 To search for the beginning of a track When the tape direction indicator 3 lights up POWER / TIMER CLOCK SET Press ¡ to search for the beginning of the next track and 1 to search for the beginning of the current track during play mode. TUNING TIME REP EDIT FM/AM ST/MONO DISC 1 MEMORY PGM PRESET 2 3 / TUNER CD When the tape direction indicator 2 lights up Press 1 to search for the beginning of the next track and ¡ to search for the beginning of the current track during play mode. [. . . ] Cannot search for the beginning of desired track of the tape. System cable is not connected. Silent gaps between tracks are too short. Excessively soft passages in the middle of selections. Conversation, or noise, etc. , is recorded. E-12 Getting Started Playing CDs ADDITIONAL INFORMATION English Specifications As a part of policy of continuous improvement, YAMAHA reserves the right to make design and specification changes for product improvement without prior notice. [. . . ]