User manual YAMAHA KX-W900U

[. . . ] Also avoid locations subject to vibration and excessive dust, heat, cold or moisture. Keep it away from sources of hum such as transformers or motors. Do not open the cabinet as this may result in damage to the deck or electrical shock. If a foreign object should get into the deck, contact your local dealer. [. . . ] There are separate meters for each left and right channel. These level meters have a peak hold function which holds the peak level for about 1. 5 seconds. ITALIANO SVENSKA DEUTSCH FRANÇAIS Digital Super Surround (DSS) setting (in step 2) (KX-W592 only) The DSS function can be utilized also for recording. Press the DSS MODE button to turn on the DSS function, and select one of the DSS programs by pressing the DSS button so that the corresponding indicator lights up. By recording with this function, you can enjoy the sources with your preferred DSS effect even when played back on car audios or portable headphone stereo systems. For details on DSS, see page 9. : When recording on one side of a tape is finished, the deck stops at the end of the tape. After recording, the deck stops at the end of the tape. ÷ When the tape running direction is set to TM, only the reverse side is recorded. ENGLISH Example: KX-W592 MUTE/SEARCH ! / NATURAL SOUND STEREO DOUBLE CASSETTE DECK KX-W592 DIRECTION RESET RESET DIRECTION ! Cassette Stabilizer RECORD/PLAYBACK PLAY / ! PLAY / Cassette Stabilizer RECORD/PLAYBACK DECK A DOLBY NR OFF/ B/ C MUTE/SEARCH STOP REC/PAUSE MUTE/SEARCH STOP REC/PAUSE PLAY TRIM 0 DECK B PHONES POWER MODE O / p / / RELAY EJECT DUBBING A # B NORMAL HIGH DSS DSS MODE EFFECT EJECT ­ + BALANCE REC LEVEL 456 101 3 7 2 2 2 8 3 3 1 9 4 4 0 10 L5 5R REC MUTE operation - Inserting a blank space during recording During recording: MUTE/SEARCH A 4-second blank interval is automatically recorded on the tape and then the deck enters Rec pause mode. If a blank interval longer than 4 seconds is desired, keep pressing for as long as you want. When the MUTE/ SEARCH button is released, the deck enters Rec pause mode after making a 4-second blank interval. To resume recording, press the PLAY button. ÷ If a blank interval shorter than 4 seconds is desired, press the PLAY button at the desired point during Rec mute mode. Setting the MODE selector to or RELAY position results in the same . function as to MODE "/[/"/RELAY Set the DIRECTION buttons for DECKs A and B. Set the DUBBING speed to either NORMAL (normal speed) or HIGH (twice the normal speed) with the DUBBING buttons*. Dubbing starts automatically. DUBBING A # B DIRECTION NORMAL HIGH The corresponding NORM or HIGH indicator lights on the display. * Higher quality sound will be obtained with the NORMAL setting. To stop dubbing Press the STOP button. (If you press the STOP button on DECK B, both decks stop simultaneously and the dubbing mode is cancelled. If you press the STOP button on DECK A, DECK A stops immediately and then DECK B stops after recording a 4-second blank section. ) When the tape in DECK B reaches its end, DECK B and DECK A stop at the same time. When the tape in DECK A reaches its end, DECK A stops and DECK B stops after providing a blank section of about 4 seconds. Available operations while dubbing The Rec Return function can be carried out on DECK B. Refer to "REC RETURN operation" on the previous page. PLAY TRIM control adjustment For normal use, set the PLAY TRIM control to the center position. When the high frequencies sound is too noticeable or too weak while monitoring the sound of DECK B, compensate the high frequency response with the PLAY TRIM control before dubbing. The compensated sound can be dubbed onto DECK B. As the compensation result depends on the quality of the tape loaded in DECK A, the monitored sound cannot be recorded as it is. [. . . ] 20 ~ 18, 000 Hz ±3 dB Type IV/Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 ~ 20, 000 Hz ±3 dB <KX-W392> Type I/Normal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 ~ 16, 000 Hz ±3 dB Type II/High (CrO2) . . . . . . . . . . . . . . . . . . . . 20 ~ 17, 000 Hz ±3 dB Type IV/Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]