User manual YAMAHA M-2

[. . . ] Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in a environment with high humidity (i. e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. [. . . ] Check that the colon (:) appears in the front panel display. A/B/C/D/E NEXT Flashes DVR SP A V-AUX DTV/CBL DVD MD/CD-R pTUNER TUNED CD MEMORY VOLUME dB C :AM Preset station group Colon (:) 630 kHz L R 46 FM/AM TUNING 4 Press PRESET/TUNING l / h to select a preset station number (1 to 8) while the MEMORY indicator is flashing. · Press h to select a higher preset station number. · Press l to select a lower preset station number. l PRESET/TUNING h Selecting preset stations You can tune into any desired station simply by selecting the preset station group and number under which it was stored. VOLUME LEVEL STANDBY /ON PRESET/TUNING FM/AM A/B/C/D/E l PRESET/TUNING h MEMORY TUNING MODE EDIT NEXT LEVEL MAN'L/AUTO FM AUTO/MAN'L INPUT Flashes DVR SP A PHONES SPEAKERS A B STRAIGHT l PROGRAM h INPUT MODE MULTI CH INPUT VIDEO AUX EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA VIDEO L AUDIO R PORTABLE V-AUX DTV/CBL DVD MD/CD-R pTUNER TUNED CD MEMORY VOLUME dB C3:AM Preset station number 630 kHz L R 12 LEVEL TITLE BAND ENTER A/B/C/D/E A/B/C/D/E DISPLAY PRESET/CH SET MENU MENU SRCH MODE 2 1 BASIC OPERATION 5 RETURN Press MEMORY (MAN'L/AUTO FM) while the MEMORY indicator is flashing. The station band and frequency appear in the front panel display with the preset station group and number you have selected. The MEMORY indicator disappears from the front panel display. MEMORY DAB MEMORY y When performing this operation with the remote control, press TUNER to select "TUNER" as the input source. 1 MAN'L/AUTO FM Press A/B/C/D/E on the front panel (or A-E/CAT. j / i on the remote control) to select the desired preset station group (A to E). The preset station group letter appears in the front panel display and changes each time you press the button. A/B/C/D/E DVR SP A V-AUX DTV/CBL DVD MD/CD-R pTUNER TUNED CD VOLUME dB C3:AM 630 kHz L R NEXT or A/B/C/D/E ENTER A/B/C/D/E The displayed station has been stored as C3. Front panel PRESET/CH Remote control 6 Repeat steps 1 through 5 to store other stations. Notes · Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number. · The reception mode (stereo or monaural) is stored along with the station frequency. English 47 FM/AM TUNING 2 Press PRESET/TUNING l / h on the front panel (or PRESET/CH u / d on the remote control) to select the desired preset station number (1 to 8). The preset station group and number appear in the front panel display along with the station band and frequency. l PRESET/TUNING h Exchanging preset stations You can exchange the assignments of two preset stations with each other. · If the station found is not the one you desire, press PTY SEEK START again to resume searching for another station broadcasting the same program type. POWER TV POWER AV STANDBY POWER STEREO MUSIC ENTERTAIN MOVIE 1 STANDARD 2 SELECT 3 EXTD SUR. 4 DIRECT ST. 5 CD MD/CD-R TUNER SPEAKERS 6 ENHANCER 7 NIGHT 8 STRAIGHT ENT. 1 3 1 9 DVD DTV/CBL DVR V-AUX 0 10 REC CODE SET MULTI CH IN 1 LEVEL TITLE BAND ENTER SET MENU MENU SRCH MODE DISC SKIP SLEEP A/B/C/D/E RETURN A/B/C/D/E DISPLAY PRESET/CH FREQ/TEXT EON AMP DAB MEMORY MODE PTY SEEK START Press TUNER on the remote control and then press BAND to select "FM" as the reception band. "FM" appears in the front panel display. TUNER LEVEL TITLE BAND FM 2 Make sure the EON indicator is lit in the front panel display. If the EON indicator is not lit in the front panel display, select another Radio Data System program so that the EON indicator lights up. English 51 RADIO DATA SYSTEM TUNING (U. K. AND EUROPE MODELS ONLY) 3 Press EON on the remote control repeatedly to select one of the 4 Radio Data System program types (NEWS, AFFAIRS, INFO or SPORT). The name of the selected program type appears in the front panel display. Displaying the Radio Data System information Use this feature to display the 4 types of the Radio Data System information: PS (program service), PTY (program type), RT (radio text) and CT (clock time). The corresponding indicators light up in the front panel display. Notes · You can select one of the Radio Data System modes only when the corresponding Radio Data System indicator lights up in the front panel display. It may take a while for this unit to receive all of the Radio Data System data from the station. · You can select only the available Radio Data System modes being offered by the station. · If the signals being received are not strong enough, this unit may not be able to utilize the Radio Data System data. In particular, the "RT" mode requires a large amount of data and may not be available even when the other Radio Data System modes are available. [. . . ] 20 Hz to 15 kHz, +0. 5, ­2 dB AM SECTION · Tuning Range [U. S. A. and Canada models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530 to 1710 kHz [Asia and General models] . . . . . . . . . . . . . . . . . 530/531 to 1710/1611 kHz [Other models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]