User manual YAMAHA M-60

[. . . ] A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 2 3 4 5 6 7 8 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 TV/AV YSP 3 4 VOL 5 Press DVD on the remote control to select DVD as the input source. DVD 6 Play back the DVD on your DVD player using the supplied remote control. Audio signals from your DVD player are output from this unit. y · You can check the digital signal being input at the DVD player with the digital connection (optical/coaxial). Press ST+3BEAM on the remote control while playing back a DVD recorded in 5. 1 DIGITAL or channel. The indicator lights up when this unit detects the 5. 1 channel signal input at the optical/ coaxial jack. If the PCM indicator lights up, confirm the settings of the digital output, bitstream output, and/or DTS output of the DVD player. · If the output volume is too low, increase the volume on this unit to around 45. · If you have set the appropriate remote control codes for your TV and DVD player, you can use the remote control supplied with this unit to operate these components. For details on how to set remote control codes, see page 81. 40 En PLAYBACK Adjusting the volume Muting the sound VOLUME CH TV VOL MUTE TV INPUT TV MUTE CODE SET 1 INPUT VOLUME + STANDBY/ON Press MUTE on the remote control to mute the sound. AUDIO MUTE ON appears in the front panel display, and the volume level indicator flashes. MUTE VOLUME CH TV VOL MUTE TV INPUT TV MUTE CODE SET VOL Press VOLUME +/­ on the front panel or on the remote control to increase or decrease the volume level. The numeric value of the volume level appears in the front panel display. Control range: MIN (minimum), 01 to 99, MAX (maximum) VOLUME Flashes VOL BASIC OPERATION 2 or VOLUME + Press MUTE on the remote control again (or press VOLUME +/­) to resume the sound output. · Discs encoded in DTS-ES or Dolby Digital 5. 1 EX will be played back in DTS or Dolby Digital. Surround modes and recommended sources Surround mode Dolby Pro Logic Dolby Pro Logic II ­ Movie Music Game Cinema Music Recommended source All sources Movies Music Games Movies Music Indicator PCM DTS Neo:6 Notes DIGITAL PL PL · Surround modes are available when the beam mode is set to a setting other than the stereo playback or the my beam as the beam mode. · When you select an input source (see page 39), the surround mode used for the previously selected input source is selected. · If the power of this unit is turned off and on again, the surround mode used for the previously selected input source before the power was turned off is selected. · The surround modes are available only when the CINEMA DSP programs are turned off (see page 54) or when the movie program is selected as the CINEMA DSP program (see page 52). · Only Dolby Pro Logic, Dolby Pro Logic II Movie and DTS Neo:6 Cinema are available when the movie program is selected as the CINEMA DSP program (see page 52). · If the surround modes are not available, "Prohibit" appears in the front panel display when you press SURROUND on the remote control. · The surround modes are available only when 2-channel signals are being input. If you try to switch between the surround modes when 5. 1 channel signals are being input, "Prohibit" appears in the front panel display. 44 En ENJOYING SURROUND SOUND Enjoying 2-channel sources in surround sound This unit can decode 2-channel sources for 5. 1 channel playback so that you can enjoy a variety of surround sound effects by switching the surround mode. y The surround modes are available only when the CINEMA DSP programs are turned off (see page 54) or when the movie program is selected as the CINEMA DSP program (see page 52). In addition, the beam mode must be set to the 5 beam, the stereo plus 3 beam or the 3 beam (see page 42). 2 Press SURROUND on the remote control repeatedly (or press SURROUND and then press / ) to switch between surround modes. SURROUND 6 or SURROUND 5BEAM ST+3BEAM 3BEAM 6 ENTER 1 STEREO 2 5 MOVIE 3 6 SPORTS MY BEAM SURROUND 4 MUSIC 7 OFF 8 +10 9 0 CH LEVEL MENU PRO LOGIC TV/AV ENTER YSP TEST RETURN PLI Movie I PLI Music I 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP PLI Game I Neo:6 Cinema Neo:6 Music Example of the surround mode display in the front panel display when the CINEMA DSP program is turned off BASIC OPERATION English 45 En ENJOYING SURROUND SOUND Adjusting surround mode parameters You can configure the parameters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect. 5BEAM ST+3BEAM 3BEAM When Dolby Pro Logic II Music is selected PANORAMA Gives front left and right channel sound a wraparound effect, distributed throughout the entire surround sound field to give you an expansive feeling. Choices: ON/OFF Default setting: OFF DIMENSION Adjusts the difference in volume between front and surround channels to the volume balance you desire. [. . . ] Make sure that the cabinet is large enough to allow adequate ventilation space around this unit. To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor. Optimizer microphone (supplied) Set the optimizer microphone at your normal listening position. Use the supplied cardboard microphone stand or a tripod to place the optimizer microphone at the same height as your ears would be when you are seated. Place the optimizer microphone on the extended center line of this unit and 1. 8 m (6. 0 ft) or more away from it. Also, make sure place the optimizer microphone within 1 m (3. 3 ft) upper or lower from the center height of this unit. Optimizer microphone More than 1. 8 m (6. 0 ft) Cardboard microphone stand Within 1 m (3. 3 ft) upper or lower from the center Sofa Center line Optimizer microphone If you have set the optimizer microphone, follow the steps on the backside to start the AUTO SETUP procedure. C2006 Continued on the back Printed in Malaysia WH90290 All rights reserved. Continued from the front Carry out the AUTO SETUP (IntelliBeam) procedure to adjust the settings that best match your listening environment. This unit employs the YAMAHA IntelliBeam technology with the aid of the supplied optimizer microphone, allowing you to achieve highly accurate sound adjustments that best match your listening environment. [. . . ]