User manual YAMAHA M-70

[. . . ] Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i. e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: ­ Other components, as they may cause damage and/or discoloration on the surface of this unit. [. . . ] It may take a while for this unit to receive all of the Radio Data System data from the station. · If the signals being received are not strong enough, this unit may not be able to utilize the Radio Data System data. In particular, the "RT" mode requires a large amount of data and may not be available even when the other Radio Data System display modes are available. · In case of poor reception conditions, tune into the desired station manually (see page 49). · In case the signal strength is weakened by external interference while this unit is receiving the Radio Data System data, the reception may be cut off unexpectedly and ". . . WAIT" appears in the front panel display. · If the reception is cut off when the "CT" mode is selected, "CT WAIT" appears in the front panel display. 52 En FM tuning 1 Tune into the desired Radio Data System broadcasting station. We recommend automatic preset tuning to tune into the Radio Data System broadcasting stations (see page 50). Note The AUTO PS feature of this unit changes the frequency display to the "PS" mode if the Radio Data System station broadcasts the PS data. Program type Descriptions News Current affairs General information Sport Education Drama Culture Science Light entertainment Pop music Rock music Middle-of-the-road music Light classical Serious classical Other music NEWS AFFAIRS INFO SPORT EDUCATE DRAMA 2 Press DISPLAY repeatedly to select the desired Radio Data System display mode. DISPLAY CULTURE SCIENCE VARIED POP M ROCK M PS PTY RT CT M. O. R. M LIGHT M CLASSICS OTHER M Frequency display · Select "PS" to display the name of the Radio Data System program. · Select "PTY" to display the type of Radio Data System program. · Select "RT" to display the information on the Radio Data System program. · Select "CT" to display the current time. Press 3BEAM to select 3 Beam. 3BEAM Notes · Beam mode settings such as beam angles and distances are ineffective in this mode. · For the full effect of My Surround, your listening position must face toward the front of this unit. 3 English y You can achieve a more realistic surround effect if you adjust settings for IMAGE LOCATION in BEAM MENU (see page 77). 55 En Enjoying surround sound Decoder indicators Depending on the input source and the selected surround mode, the decoder indicators in the front panel display light up as follows: Status Indicator Surround modes and recommended sources Surround mode Dolby Pro Logic Dolby Pro Logic II ­ Movie Music Game Cinema Music Recommended source All sources Movies Music Games Movies Music XM Satellite Radio (U. S. A. and Canada models only) When PCM signals are being input PCM When DTS digital signals are being input When DTS Neo:6 is selected as the surround mode When Dolby Digital signals are being input When Dolby Pro Logic is selected as the surround mode When Dolby Pro Logic II is selected as the surround mode DTS Neo:6 Neural Surround (U. S. A. and Canada models only) + ­ DIGITAL Notes · When you select an input source (see page 45), the surround mode used for the previously selected input source is automatically selected. · If the power of this unit is turned off and on again, the surround mode used for the previously selected input source before the power was turned off is automatically selected. · If the surround modes are not available, "Prohibit" appears in the front panel display when you press SUR. · The surround modes are available: ­ when the beam mode is set to a setting other than the 2channel or 5-channel stereo playback (see page 60) and My Surround (see page 55). ­ when the CINEMA DSP programs are turned off (see page 65). ­ when the movie program is selected as the CINEMA DSP program (see page 64). In this case, only Dolby Pro Logic, Dolby Pro Logic II Movie, and DTS Neo:6 Cinema are available. ­ when 2-channel signals are being input. [. . . ] The product is guaranteed to be free from defects in workmanship or materials for a period of two years from the date of the original purchase. Yamaha undertakes, subject to the conditions listed below, to have the faulty product or any part(s) repaired, or replaced at Yamaha's discretion, without any charge for parts or labour. Yamaha reserves the right to replace a product with that of a similar kind and/or value and condition, where a model has been discontinued or is considered uneconomic to repair. The original invoice or sales receipt (showing date of purchase, product code and dealer's name) MUST accompany the defective product, along with a statement detailing the fault. [. . . ]