User manual YAMAHA M-85

[. . . ] Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i. e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: ­ Other components, as they may cause damage and/or discoloration on the surface of this unit. [. . . ] Front L;;;;;;;6. 0m Front R;;;;;;;6. 0m Center;;;;;;;;2. 5m Surround L;;;;9. 1m Surround R;;;;9. 1m [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return y We recommend that you use the setting optimized by AUTO SETUP (see page 31). Adjust this parameter only when you changed HORIZONTAL ANGLE (see page 59). Choices: ­1. 0 m to +13. 0 m (­3. 5 ft to +43. 5 ft) Adjust toward ­ (minus) to move the focus outward and adjust toward + (plus) to move the focus toward the normal position. · Front L adjusts the focal length for the front left sound beams. · Front R adjusts the focal length for the front right sound beams. · Center adjusts the focal length for the center sound beams. Initial setting: ­0. 3 m (­1. 0 ft) · Surround L adjusts the focal length for the surround left sound beams. · Surround R adjusts the focal length for the surround right sound beams. y We recommend that you use the initial setting (­0. 3 m (or ­1. 0 ft)) for the center channel. [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return 60 En p p p p p p c)FOCAL LENGTH 5 beam . Front L;;;;;;+1. 5m Front R;;;;;;+1. 5m Center;;;;;;;-0. 3m Surround L;;;+2. 3m Surround R;;;+2. 3m p p MANUAL SETUP TREBLE GAIN (Treble gain) Use to adjust the high-frequency output level of each channel. y If the reflection points of the front left and right or surround left and right sound beams are on curtain or other acoustically absorbent surfaces, you can achieve more effective surround sound by increasing the treble level for those sound beams. IMAGE LOCATION (Image location) Use to adjust the direction from which the front left and right channel sound is heard so that each sound can be heard closer to the center channel. Use this feature to redirect audio signals if the sound coming from the front left and right channels seems unnatural, such as when your listening position is not the center of your listening room. Choices: ­20 to 0 dB DISTANCE (Distance) Select to adjust the distance of the subwoofer from the listening position. Choices: 0. 3 to 15. 0 m (1. 0 ft to 50. 0 ft) Initial setting: 3. 0 m (10. 0 ft) TONE CONTROL (Tone control) You can adjust the tonal quality of sound beams. p . A)TONE CONTROLTREBLE;;;;;0dB BASS;;;;;;;0dB [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return TREBLE (Treble) Use to adjust the high-frequency response. Choices: ­12 dB to +12 dB Initial setting: 0 dB BASS (Bass) Use to adjust the low-frequency response. Choices: ­12 dB to +12 dB Initial setting: 0 dB SUBWOOFER SET (Subwoofer settings) Use to manually adjust the various subwoofer settings. B)SUBWOOFER SET . BASS OUT;;;;;FRONT CROSS OVER;;;100Hz LFE LEVEL;;;;;;0dB DISTANCE;;;;;;3. 0m [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return [ ]/[ ]:Select [ENTER]:Return 62 En p p p p p p + -----+ ------ p p p p MUTE LEVEL (Muting level) Use to adjust how much the mute function reduces the volume level. Choices: MUTE, ­20 dB · Select MUTE to completely halt all sound output. · Select ­20 dB to reduce the current volume level by 20 dB. C)MUTE LEVEL pMUTE -20dB p MANUAL SETUP AUDIO DELAY (Audio delay) Use to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors. Choices: 0 to 160 msec TruBass Use to turn on or off the bass sound enhancer. The SRS TruBass technology improves bass even without a subwoofer and provides deeper, richer bass in the presence of a subwoofer. Choices: OFF, ON D)AUDIO DELAY AUDIO DELAY;;;;;0msec [ ]/[ ]:Select [ENTER]:Return F)TruBass OFF pON p [ ]/[ ]:Select [ENTER]:Return DD/DTS Dynamic Range (Dynamic range of Dolby Digital and DTS signals) Use to select the amount of dynamic range compression. [. . . ] · De AUTO SETUP procedure duurt ongeveer 3 minuten. · Druk op RETURN om de AUTO SETUP procedure te annuleren nadat deze al is begonnen. 6 Druk op één van de functietoetsen voor de geluidsbundels op de afstandsbediening om de gewenste gebruiksfunctie voor de geluidsbundels te selecteren. INTELLIBEAM MIC INPUT VOLUME STANDBY/ON 5BEAM ST+3BEAM 3BEAM 1 STEREO 2 MY BEAM 3 MY SUR. Kies uit de zes mogelijke gebruiksfuncties voor de geluidsbundels de stand die u het best vindt passen bij het signaal en de signaalbron waar u naar wilt luisteren. Zie bladzijde 44 van de Handleiding voor meer informatie over de gebruiksfuncties voor de geluidsbundels. 4 5 6 INTELLIBEAM MIC Voor meer gedetailleerde aanpassingen met de hand aan uw luisteromgeving, of voor geavanceerde instellingen voor luidsprekerposities, geluidsbundels enz. , verwijzen we u naar "MANUAL SETUP" op bladzijde 56 van de Handleiding. p, p s (x1) s --p (x1) s (x1) s p (x1) s p IntelliBeam (x1) s p p (x1) s p DVD (x1) 2 p M-85 , p DVD-pp, p. , p DVD-pp p, . 16 ­ 24 p . p p pp p DVD-pp p p p . [. . . ]