User manual YAMAHA MCR-640

[. . . ] G MCR-640 (R-840 + CD-640 + NS-BP300) RECEIVER/CD PLAYER AMPLI-TUNER/LECTEUR CD OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 1 2 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place and away from direct sunlight, heat sources, vibration, dust, moisture and cold. [. . . ] To cancel repeat A-B Press A-B again to make “A-B” disappear from the front panel display. Notes • You cannot set repeat A-B to start in one track and end in another track. € This operation is not available for MP3 or WMA files recorded on a disc/USB device. € If you stop playback by pressing , repeat A-B is canceled. € You cannot use repeat A-B when this unit is in Pure Direct mode. The CD player enters program input mode and the PROG indicator lights up on the front panel display. CD TRACK PROG Track number Program number 3 Playing back randomly (Random Play) You can play back tracks in the disc/USB device in random order. Note When playing back a disc/USB device with Random Play, the remaining time of the disc/USB device cannot be displayed. Use the numeric keys to enter the track number you want to program and press ENTER. Example: To select the track number 8, press 8, and press ENTER to confirm the entry. The front panel display shows the total number of tracks and then the program screen. Repeat this step until you program all desired tracks. 4 To clear the last programmed track RANDOM Press CLEAR during program input mode. To clear all programmed tracks Press CLEAR after exiting program input mode. The display is turned off after 2 seconds. Note If you open the disc tray or set the CD player to standby mode, the program is automatically cleared. press RANDOM while playback is stopped. The RANDOM indicator lights up on the CD player’s front panel display and Random Play starts. You can also use the automatic and manual preset tuning features to store up to 30 stations. Automatic tuning Automatic tuning is effective when station signals are strong and there is no interference. Automatic preset tuning Follow the procedure below to preset radio stations automatically. Press and hold MEMORY for more than 2 seconds. [. . . ] (4) Accidents, lightning, water, fire, improper ventilation, battery leakage or any cause beyond Yamaha’s control. (5) Defects of the system into which this product is incorporated and/or incompatibility with third party products. (6) Use of a product imported into the EEA and/or Switzerland, not by Yamaha, where that product does not conform to the technical or safety standards of the country of use and/or to the standard specification of a product sold by Yamaha in the EEA and/or Switzerland. 5 Where the guarantee differs between the country of purchase and the country of use of the product, the guarantee of the country of use shall apply. [. . . ]