User manual YAMAHA MCR-B142

[. . . ] 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this unit in a well ventilated, cool, dry, clean place away from direct sunlight, heat sources, vibration, dust, moisture and cold. For proper ventilation, allow the following minimum clearances. [. . . ] aUX IN 1 2 Press 2 to turn the system on. 3 Press the AUX source button to switch the audio source to AUX. 4 Start playback on the connected external audio device. 3 15 En USEFUL FUNCTIONS Using the Option menu When you press OPTION, the option menu will appear in the front panel display, allowing you to make the following settings. (eject button) cannot be operated while the option menu is displayed. Option menu DIMMER EQ LOW EQ MID EQ HIGH BALANCE POWER SAVING Setting or range Adjusts the brightness of the front panel display (1*: bright, 2: medium, 3: dim). Adjusts the tonal character (low frequencies) (–10 - 0* - +10 dB). Adjusts the tonal character (mid frequencies) (–10 - 0* - +10 dB). Adjusts the tonal character (high frequencies) (–10 - 0* - +10 dB). Adjusts the volume balance of the left and right speakers (L+10 - CENTER* - R+10). Switches the system-off state NORMAL: Show the clock An iPod can be charged in the iPod Dock, and the alarm will operate No clock display ECO*: (power saving mode) An iPod can be charged in the iPod Dock, but the alarm will not operate See page 14 – – – – – PRESET DELETE Deletes a stored preset (shown only if the audio source is FM). € AUTO POWER OFF CLOCK SET ALARM SET You can specify the time after which the system will turn off automatically. If no operation occurs for the duration you specify, the system will turn off automatically (TIME 12H*: 12 hours, TIME 8H: 8 hours, TIME 4H: 4 hours, OFF: the system will not turn off). 1 4 2 3 2 Press  /  to select the menu item that you want to set, and then press ENTER. 3 Press  /  to edit the setting, and then press ENTER to confirm the setting. If you want to continue making other settings, repeat the procedure from step 2 . 4 Press OPTION to exit the option menu. If you decide to cancel without changing the setting, press OPTION before confirming the change. Using the sleep timer When the specified time has elapsed, the system will turn off automatically. Press repeatedly Press SNOOZE/SLEEP repeatedly to specify the time after which the system will turn off. you can specify 30 , 60 , 90 , 120 or OFF. When you select a time, the sleep timer is turned on, and the sleep indicator ( ) is shown in the front panel display. [. . . ] Information for Users on Collection and Disposal of Old Equipment and Used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [. . . ]