User manual YAMAHA MCX-SP10

[. . . ] · Do not place the speaker where foreign objects such as water drips might fall. It might cause a fire, damage to the speaker, and/or personal injury. · Do not place the speaker where it is liable to be knocked over or struck by falling objects. [. . . ] Use a screwdriver to tighten the screws on the upper arm of the stand, so the speaker is tightly mounted. 4mm Cautions 20mm or more I Mounting the speaker on a wall Use the brackets on the rear of the speakers to mount the speaker on a wall. 1. Attach the pads to the rear of the speaker, as illustrated. Mounting bracket · This speaker weighs 1. 2 kg (2 lbs 10 oz). Do not mount it on thin plywood or a wall with soft surface material. If mounted, the screws may come loose from the flimsy surface and the speaker may fall. This damages the speaker and may cause personal injury. · Do not use nails, adhesives, or other unstable materials to mount the speakers. Long-term use and vibrations may cause it to fall. · To avoid accidents resulting from tripping over loose speaker cable, fix it to the wall. · This speaker features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color. Should this happen, move the speaker away from the TV set. Pad 2 CONNECTING TO YOUR MCX-A10 Before making connections, make sure that the MCX-A10 is switched off. I Connections · Connect the push-type input terminals at the rear of the speakers to the SPEAKER OUT terminals of the MCX-A10 with the speaker cable provided. · Connect the (+) terminals on the MCX-A10 and the speakers using one side of the cable. Connect the (­) terminals on both components using the other side of the cable. · Connect one speaker to the left (marked L) terminals of your MCX-A10, and the other speaker to the right (marked R) terminals, making sure not to reverse the polarity (+, ­). [. . . ] 1. 2 kg (2 lbs 10oz) x 2 Caution · When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools. · Specifications are subject to change without notice due to product improvements. · Care should be taken not to exceed the input power values noted above. 4 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE. , BUENA PARK, CALIF. 135 MILNER AVE. , SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G. m. b. H. [. . . ]