User manual YAMAHA MJC8E

[. . . ] For a list of USB Wireless LAN adaptors whose compatibility have been confirmed by Yamaha, refer to the Yamaha website: http://download. yamaha. com/ NOTE To configure the setting for the Wireless LAN using the push-button method for WPS setup, the access point must correspond to the push-button method for WPS setup. For details about checking or changing the settings of the access point, refer to the owner's manual of the Wireless LAN router (access point). NOTE The MJC8E does not support the PIN method. MJC8E Version 1. 10 New Functions 1 About the Internet Settings (settings related to WPS and the access point) When you use Internet Direct Connection (IDC) for the first time, you should make the Internet settings (Wireless LAN) on the instrument, then save all of the settings. This section explains how to configure the settings using the USB Wireless LAN adapter (using DHCP). [. . . ] This section explains how to configure the settings using the USB Wireless LAN adapter (using DHCP). There are two methods ­ the push-button method for WPS setup and the search method for the access point, and both configure the settings using the setting for the Internet Setting display. Make a written note of the settings of the search method for the access point, in case you have to enter them again. If you are not using a USB Wireless LAN adapter (using DHCP), refer to the following URL: http://services. music. yamaha. com/ radio/connect. html Using the push-button method for WPS setup When the Wireless LAN router (access point) you are using is compatible with the pushbutton method for WPS setup, the settings for the wireless network can be automatically made. 1. Call up the Internet Setting display. Hold down the [FILE/SONG SETTING] button and press the [REC]. Internet Setting display For details about checking or changing the settings of the access point, refer to the owner's manual of the Wireless LAN router (access point). Wireless Execute?__ > WPS(PushButton) 2. Execute the setting using WPS (Push-Button). If " WPS (PushButton)" does not appear in the lower left of the display, press the C [-] button to call up " WPS (PushButton). " Press the B [+ (YES)] button located next to "Execute?- ->" to execute the setting using WPS (PushButton). WPS (PushButton) executing display Executing 3. Press the WPS button of the access point you are using within two minutes. The settings for SSID, channel, security and key are automatically configured. The process of settings using the WPS (PushButton) is complete. After the WPS (PushButton) completion display briefly appears followed by a `Save Settings' and `Check Connection' display (page 57), save the settings in this display. WPS (PushButton) completion display Wireless Completed WPS(PushButton) MJC8E Version 1. 10 New Functions 2 Searching for the access point. If the Wireless LAN router (access point) you are using is not compatible with the pushbutton method for WPS setup, search the access point and then set the wireless network manually. 1. Call up the Internet Setting display. Hold down the [FILE/SONG SETTING] button and press the [REC] button. Internet Setting display Wireless Execute?__ > NetworkSearch 2. Start the Network Search (searching for the access point). If the " NetworkSearch" indication does not appear in the lower left of the display, press the C [+] button to call up " NetworkSearch. " Press the B [+ (YES)] button located next to "Execute?- ->" to start the search for the access point. When searching for an access point, the display shows the access point(s) near the Clavinova. Once you select the desired access point, the SSID and channel are automatically set. You have to set it by yourself if you select an encrypted access point (the " " key icon appears). Wireless Execute?__ > NetworkSearch Access point(s) Wireless Select?__ > :abcdefghijk(C01) :abcdefghijk(C01) Key icon SSID Channel 3. Selecting the access point 3-1 3-2 Access point is shown in the display. * Neither the name of XySSL nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. WPA Supplicant Copyright © 2003-2009, Jouni Malinen <j@w1. fi> and contributors All Rights Reserved. This program is dual-licensed under both the GPL version 2 and BSD license. Either license may be used at your option. License Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. [. . . ] License Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. [. . . ]