User manual YAMAHA MKH-9200 MKH-9200S

[. . . ] Loose screws may cause the instrument to slip or produce noise during playing. Therefore, always check and re-tighten all screws before using the instrument. To tighten the arm section screws, use the hexagonal wrench provided. [. . . ] Hands and/or fingers can get caught in this area resulting in injury. ?????Accessories ?????? Hexagonal Wrench ?4mm ZN39960 R0 Printed in Japan ???????ASSEMBLY PROCEDURE 1 ???????????????Carrying Holder Setup MKH-9200(S) ?MBL-32A, 832A MXL-32A, 32AF 2 ??????????Attach the Instrument ???????????????????????????????????? First adjust the bracket position to a comfortable fit. ???????????????????????????????????????????????????????????????? Attach the arms that are supplied with the Multi Toms. Use a hex wrench to loosen the four screws A on the carrier frame so that the ?Set the carrier frame on the instrument, as shown in the illustration below, and slide Loosen ???? Tighten the brackets on the carrier frame so that they align with the carrier mounting plates on the bottom of the instrument. Use the four fixing bolts B on the brackets to attach the carrier frame to the instrument. Tighten the four bolts little by little and secure. Use the hex wrench to firmly tighten the carrier frame?s screws A . * To remove the carrier frame, loosen the fixing wing bolts only. * If you are having trouble reattaching the carrier frame after it has been removed, go through the same procedure as described above. ??????????? Carrier Frame Carrier mounting plate ?????????????3?????2??? [. . . ] ????????? Carrying holder ?????????????????? Use the hexagonal wrench provided. ?????????????????? Insert the arms into the frame pivot holders. Support the marching bells/xylophone and securely tighten the carrier frame pivot holder screws C using the Allen wrench provided. [. . . ]