User manual YAMAHA MM6/MM8

[. . . ] Owner's Manual EN SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc. , is used, please observe all safety markings and instructions that accompany the accessory product. [. . . ] Never turn off the power or remove the USB storage device during this operation. song. You can press the [INC/YES] and [DEC/NO] buttons simultaneously to select the first user song. The DESTINATION FILE will be highlighted, and a default name will appear for the converted song file. 10 A message will appear on the display when the operation is complete. Press the [EXIT] button to return to the MAIN display. 5 Press the [EXECUTE] button. NOTE · If an existing filename is specified the display prompts you for confirmation. Press [EXECUTE] or [INC/YES] if it is OK to overwrite the file, or [DEC/NO] to cancel. You can press the [DEC/NO] button at this point to cancel the operation. · The amount of time it will take to perform the save operation depends on the particular USB storage device you are using. 70 MM6/MM8 Owner's Manual Storing/Saving Data Loading User Files and Pattern Files User and pattern files residing on a USB storage device can be loaded into the instrument. CAUTION · When a User file is loaded, user songs 001­005, the user patterns, and the performance memory will all be overwritten. If you only load a pattern file, only the user patterns will be overwritten. Save important data to a USB storage device before loading data that will overwrite it. · Pattern files created on other Yamaha keyboards ("sty" file extension only) can be loaded into MM6/MM8 User Pattern No. Pattern files cannot be created using the MM6/MM8. 4 Use the dial to select the user file or pattern file you want to load. All user files in the USB storage device will be displayed first, followed by the pattern files. NOTE · Pattern files must be located in the root directory. Pattern files located within folders will not be recognized. 1 With the USB storage device containing the file you want to load connected to the USB TO DEVICE connector, check that "CONNECT" is showing in the MAIN display. Press the [MENU] button. 5 Press the [EXECUTE] button. A confirmation message will appear on the display. You can press the [DEC/NO] button at this point to cancel the operation. 2 3 Use the CATEGORY [DEC] / [INC] buttons to locate the Load item. 6 Press the [EXECUTE] button again, or CAUTION the [INC/YES] button, and the load operation will begin. · Once the load-in-progress message appears in the display, the operation cannot be canceled. Never turn off the power or remove the USB storage device during this operation. 7 A message will appear on the display when the operation is complete. Press the [EXIT] button to return to the MAIN display. NOTE · The SMF saved to a USB storage device can not be loaded as a user song. MM6/MM8 Owner's Manual 71 Storing/Saving Data Deleting Data from a USB Storage Device This procedure deletes selected user files and SMF files from a USB storage device. 1 Make sure that the USB storage device containing the file(s) you want to delete has been properly connected to the instrument's USB TO DEVICE terminal, and that "CONNECT" is showing in the MAIN display. 4 Select the file you want to delete. You can press the [INC/YES] and [DEC/NO] buttons simultaneously to select the first song or user file on the USB storage device. 5 Press the [EXECUTE] button. A confirmation message will appear on the display. You can press the [DEC/NO] button at this point to cancel the operation. 2 Press the [MENU] button. 3 Use the CATEGORY [DEC] and [INC] buttons to locate the Delete item. 6 Press the [EXECUTE] button again, or the [INC/YES] button, and the delete operation will begin. CAUTION · Once the delete-in-progress message appears in the display, the operation cannot be canceled. Never turn off the power or remove the USB storage device during this operation. 7 A message will appear on the display when the operation is complete. Press the [EXIT] button to return to the MAIN display. NOTE · If the USB storage device has been write-protected, an appropriate message will appear on the display and you will not be able to execute the operation. Playing SMF Saved to a USB Storage Device 1 Make sure that the USB storage device containing the SMF you want to play has been properly connected to the instrument's USB TO DEVICE terminal, and that "CONNECT" is showing in the MAIN display. 3 Use the dial to select the SMF you want to play. 4 Press the [START/STOP] button. 2 Press the [USB] button. NOTE · SMF playback will not be transmitted via MIDI. 72 MM6/MM8 Owner's Manual Connections The Connectors q w e r q OUTPUT L/MONO and R jacks r USB TO HOST terminal These jacks output stereo audio signals (1/4" mono phone plugs). For monophonic output, use just the L/MONO jack. w MIDI IN and OUT terminals This terminal allows direct connection to a personal computer, and allows you to transfer MIDI data between the devices. Refer to "Connecting to a Personal Computer" on page 77 for more information. The MIDI IN connector receives MIDI messages from external MIDI devices. [. . . ] Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. 4, Jakarta 12930, Indonesia Tel: 21-520-2577 SPAIN/PORTUGAL Yamaha Música Ibérica, S. A. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 KOREA Yamaha Music Korea Ltd. [. . . ]