User manual YAMAHA MOTIFESE2

[. . . ] DATA LIST DATEN-LISTE L ISTE DE DONNÉES Integrated Sampling Sequencer / Modular Synthesis Plug-in System / Real-time External Control Surface Table of Contents Voice List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Drum Voice List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Drum Kit Assign List. . . . . . . . . . . . . . . . . . . . 9 Waveform List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Determines how the Scrub function is applied when using the dial. When this is set to on, Scrub moves according to the Grid position in the Track View window. Moves the cursor (indicating the current track) up. Moves the cursor (indicating the current track) down. Zooms in/out in the active Track View and Piano Roll Window. [SHIFT] + [ON] of each channel (in the normal status) [ON] (with the [SOLO] lamp turned on) [SHIFT] + [ON] (with the [SOLO] lamp turned on) [SOLO] [SHIFT]+[SOLO] F1 F2 F3 F4 F5 F6 SF1 F1 F2 SF2 F3 SF3 F4 SF4 F5 SF5 F6 [SHIFT]+[REC RDY] [AUDIO] [INST] When controlling SQ01 V2/Multi Part Editor for MOTIF ES6/7/8: Functions assigned to [F1] - [F6] and [SF1] - [SF5] buttons [MIDI] [AUX/BUS] [OTHER] PAGE1 PAN/SEND SEND PAN GROUP NAME/VALUE EFFECT DIAL RESET KN1-4/5-8 SHIFT [BANK </>] [SHIFT]+[F1] [SHIFT]+[F2] DYNAMICS BANK-L BANK-R FADER BANKS TONE FLIP SOLO REC/RDY NAME/VALUE DIAL RESET KN1-4/5-8 SHIFT [SHIFT]+[F3] [SHIFT]+[F4] BANK-L BANK-R MIXER/LAYER ARP FX [SHIFT]+[F5] AUX/BUS MIDI NAME/VALUE DIAL RESET KN1-4/5-8 SHIFT INST AUDIO [SHIFT]+[F6] [SHIFT]+[F7] [SHIFT]+[F8] OTHER BANK-L BANK-R PAGE2 EQ EQ LOW SEL CH EQ HIGH-MID NAME/VALUE DIAL RESET KN1-4/5-8 SHIFT [RWD] [FF] EQ LOW-MID EQ HIGH BANK-L BANK-R PAN/SEND TONE F5 F1 F2 F6 F3 F7 F4 F8 KN1-4/5-8 SHIFT [STOP] [PLAY] [REC] TONE ARP FX NAME/VALUE DIAL RESET KN1-4/5-8 SHIFT [SCRUB] BANK-L BANK-R ARP FX EQ [UP] (with the [ZOOM] lamp turned off) CURSOR-L CURSOR-DWN CURSOR-R ZOOM SCRUB DIAL RESET BANK-L KN1-4/5-8 SHIFT CURSOR-UP BANK-R [DOWN] (with the [ZOOM] lamp turned off) [LEFT] (with the [ZOOM] lamp turned off) [RIGHT] (with the [ZOOM] lamp turned off) [ZOOM] [UP]/[DOWN]/[LEFT]/[RIGHT] (with the [ZOOM] lamp turned on) PAN mode [PAN] Knobs 1 - 8 (tweaking) Knobs 1 - 8 (tweaking) [SHIFT] + Knobs 1 - 8 (pressing) Edits the Pan (on page 1). Resets the edited parameter to the default value (CENTER/0. 00). AUX SEND mode [SEND] (Not available when the AUX/BUS window is active. ) Knobs 1 - 8 (tweaking) [SHIFT] + Knobs 1 - 8 (pressing) Edits the AUX Send Level. Resets the edited parameter to the default value (-). EFF SEND mode [EFFECT] (Not available when the AUX/BUS window is active. ) Knobs 1 - 8 (tweaking) [SHIFT] + Knobs 1 - 8 (pressing) Edits the Effect Send Level. Resets the edited parameter to the default value (-). 58 Data List Remote Control Assignments When controlling Logic: Functions assigned to [F1] - [F6] and [SF1] - [SF5] buttons ASSIGNMENT PAN/SEND Button/Controller Functions [SHIFT]+[UNDO] [SAVE] [MARKER] [SHIFT]+[MARKER] PLUG-IN INSTRUMENT EQ DIAL RESET KN1-4/5-8 SHIFT Executes the Redo operation. Press repeatedly to rewind more quickly. When the Marker is turned on, this operation moves the song position to the previous Marker. When Nudge is turned on, this operation moves the current object. Press repeatedly to fast-forward more quickly. When the Marker is turned on, this operation moves the song position to the next Marker. When Nudge is turned on, this operation moves the current object. Pressing this when playback is stopped goes to the top of the song. Press to start playback from the current point. The [F] (Play) and [I] (Rec) lamp are turned on during recording. When Scrub is on, the dial can be used for Scrub playback. When Scrub is off, the dial is used to move the song position. SEND TRACK [RWD] PAN/SURND BANK-L BANK-R FADER BANKS TONE [FF] NAME/VALUE DIAL RESET KN1-4/5-8 SHIFT FLIP CHANNEL-L CHANNEL-R BANK-L BANK-R [STOP] GLOBAL VIEW ARP FX [PLAY] BUSSES OUTPUTS USER KN1-4/5-8 SHIFT AUX MIDI TR [REC] [ZOOM] INPUTS AUDIO TR AUDIO INST GLOBAL VIEW UTILITIES EQ [SCRUB] UNDO ENTER NAME/VALUE DIAL RESET KN1-4/5-8 SHIFT SAVE CANCEL BANK-L BANK-R PAN mode [PAN] (Multi Channel View) [PAN] [PAN] (Track Parameter View of PAN/SURROUND) Cursor [LEFT] Cursor [RIGHT] (Multi Channel View) Knobs 1 - 8 (turning/turning pressing) Changes the parameter to be edited. PAN/SEND TONE F5 F1 F2 F6 F3 F7 F4 F8 KN1-4/5-8 SHIFT Edits the parameter. Tweak the Knob to select "Pan" or "Surround" so that the Pan/Surround indication flashes, then press the Knob to actually select either of them. Resets the edited parameter to the default value. When selecting the mode ("Pan" or "Surround"), turn the corresponding knob to select either of them so that the indication flashes, then press the knob to actually enter the selected one. TONE ARP FX NUDGE MARKER CYCLE DROP CLICK REPLACE DIAL RESET SOLO KN1-4/5-8 SHIFT Knobs 1 - 8 (pressing) (Parameters other than Mode selection) ARP FX EQ CURSOR-L CURSOR-DWN CURSOR-R ZOOM SCRUB DIAL RESET BANK-L KN1-4/5-8 SHIFT EQ mode [EQ] (Multi Channel View) [EQ] [EQ] (Track Parameter View) Cursor [UP]/[DOWN] (Multi Channel View) Cursor [LEFT] Cursor [RIGHT] (Multi Channel View) Changes the Slot number. [. . . ] Common Reverb Chorus Insertion A Insertion B Controller Plug-in XG Part Native Extra Multi Common Part1 : Part16 Plug-in 1 Part Plug-in 2 Part Plug-in 3 Part AD Part1 : AD Part5 Drum Voice Sample Voice Mixing Voice Plug-in Voice Preset User User User User 1 (Slot1) User 2 (Slot2) User 3 (Slot3) Preset 1 (Slot1) 71 72 73 47 48 49 0 ­ 63 0 ­ 63 0 ­ 63 Preset 2 (Slot1) Preset 3 (Slot1) Preset 1 (Slot2) Can be selected when the Plug-in board has been installed to slot 2. NORMAL VOICE COMMON Can be selected when the Plug-in board has been installed to slot 3. 34 34 40 40 40 40 40 40 40 40 40 NORMAL VOICE ELEMENT GROUP 1 NORMAL VOICE ELEMENT GROUP 2 NORMAL VOICE ELEMENT GROUP 3 NORMAL VOICE ELEMENT GROUP 4 DRUM COMMON 41 42 43 44 46 46 46 46 46 46 46 46 DRUM ELEMENT GROUP 1 DRUM ELEMENT GROUP 2 DRUM ELEMENT GROUP 3 DRUM ELEMENT GROUP 4 VOICE PLUG-IN 47 48 49 4A 4C 4C 4C 4C 4C 4C 4C 4C 4C Mix for Song/Pattern 36 37 37 37 37 37 38 38 74 75 76 4A 4B 4C 0 ­ 63 0 ­ 63 0 ­ 63 Preset 2 (Slot2) Preset 3 (Slot2) Preset 1 (Slot3) 77 78 63 3F 64 4D 4E 40 0 ­ 63 0 ­ 63 Plug-in Direct Performance 0 ­ 127 Preset 2 (Slot3) Preset 3 (Slot3) User (Internal) Depending on the installed Plug-in Board. When only the Program Change is received after entering any of the mode, the corresponding voice in the currently selected Type/Memory is called up. The Master number and the Performance/Song/Pattern/Voice mode can be changed only via the Parameter Change. The Song/Pattern can be changed only via the Song Select (Song: F3, 00-F3, 3F/ Pattern: F3, 00-F3, 3F). [. . . ]