User manual YAMAHA MOX 6 REMOTE EDITOR

[. . . ] · Windows is the registered trademarks of Microsoft® Corporation. · Apple, Mac and Macintosh are trademarks of Apple Inc. , registered in the U. S. · Steinberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH. · The company names and product names in this Owner's Manual are the trademarks or registered trademarks of their respective companies. This owner's manual assumes that you are already familiar with basic Windows/Mac operations. [. . . ] Click at the top left corner to quit the MOX6/MOX8 Remote Editor. If the edited Bank data has not been saved yet, messages appear prompting you to save it. Save a Bank file to quit the MOX6/MOX8 Remote Editor. MOX6/MOX8 Remote Editor Owner's Manual 5 MOX6/MOX8 Remote Editor Windows: Edit window MOX6/MOX8 Remote Editor Windows The MOX6/MOX8 Remote Editor consists of two windows: Edit and Library. The Edit window lets you edit the settings of the selected Control Template while the Library window lets you import or copy Control Templates. Edit window -1 -2 -1 -2 Always on Top button Turning this button ( ) on keeps the MOX6/MOX8 Remote Editor's window always on top. ONLINE indicator Shows whether the MOX6/MOX8 Remote Editor and the MOX6/MOX8 are properly connected via USB (ONLINE status). In the ONLINE status, this indicator lights in green and any operations on the MOX6/ MOX8 Remote Editor automatically change the parameter value on the MOX6/MOX8. Library button Calls up the Library window (page 9). [Store] button Calls up the Store confirmation window. On this window, clicking [YES] executes the Store operation while clicking [NO] returns the Editor to the original status without any operation. The Store operation will store all the 50 templates which are being edited to the Current Bank. File Name Displays the file name including the current edited Template. MOX6/MOX8 Remote Editor Owner's Manual 6 MOX6/MOX8 Remote Editor Windows: Edit window / mark Shows the Editing status of the Control Template or Bank. The mark indicates that the current Control Template has been modified but not yet stored. This indicator disappears if you click the [Store] button and then execute the Template Save operation. The mark is also used to indicate that the current Bank has been modified but not yet saved to a File. This indicator disappears if you execute the File Save operation. Control Template Selection box Shows the currently selected Control Template. You can select the previous/next template by clicking the scroll button at the right of this box, or select any template in the current bank by clicking the triangular button. Instrument Select box Shows the VSTi name which is controlled by the Knobs. You can change the VSTi by clicking the triangular button then selecting the desired one. You can also input the VSTi name directly in this box manually. Make sure to input the VSTi name correctly. n If the desired VSTi is not shown even when you click the triangular button, refer to the Troubleshooting section on page 13. Edit section The Knobs illustrated here correspond to the Knobs on the top panel of the MOX6/MOX8. Here, you can assign the desired function to each of the Knobs. -1 Remote/CC buttons When Remote is selected, using the Knobs generates the Remote Control messages exclusive for Cubase. When CC is selected, using the Knobs generates MIDI Control Change messages. -2 Function Assignment boxes The Knobs illustrated here are equivalent to the Knobs on the MOX6/MOX8. Each of the boxes at the right side of the Knob shows the function assigned to the corresponding Knob. (The function shown here differs depending on the Remote/CC button status. ) You can change the function assigned to each of the Knobs by clicking a desired box, then selecting the desired function in the Controller Setting section. In the ONLINE status, setting this parameter changes the settings of the MOX6/MOX8 in real time. Controller Setting section Determines the function of the Knobs corresponding to the column selected in the are two sections here: Remote section and CC (Control Change) section. -1 Remote section Assigns the function to the Function Assignment box selected in the the Remote/CC button of the Edit section to "Remote. The setting here is available when the Remote/CC button is set to "Remote. " Clicking "Remote" at the left of this section also sets Edit section. [. . . ] Select [File] [VSTi Database] [Full Scan] to search the VSTi information (page 11). The parameters set on the MOX6/MOX8 Remote Editor are not displayed on the MOX6/MOX8. · The display on the MOX6/MOX8 is based on the information sent from Cubase (see the illustration above). Start Cubase and select the corresponding VSTi within Cubase. Even when I change the VSTi on the DAW software such as Cubase, the Control Template on the MOX6/MOX8 does not change corresponding to the newly selected VSTi. · The VSTi-related information is obtained through the Extension software (see the illustration below). Make sure that the latest MOX6/MOX8 Extension is installed. · Make sure that the VSTi name displayed on the DAW software is the same as the one shown in the VSTi Select/Input box (page 7). Data transfer between the MOX6/MOX8 Remote Editor, MOX6/MOX8 and DAW software: Computer DAW software (Cubase, etc. ) Note On/Off, Control Change MOX6/MOX8 instrument Port 1 VSTi MOX6/MOX8 Extension Remote Control Port 2 VSTi parameters (name, value) MOX6/MOX8 Remote Editor Port 5 MOX6/MOX8 parameters Turning the Knobs on the MOX6/MOX8 affects Remote parameters other than those intended for control. · In Cubase, remove the checkmarks of "ALL MIDI Inputs" corresponding to MIDI Ports 2 and 5 for the MOX6/MOX8 instrument. Even when I click the triangular button at the right of Control Parameter in the Edit window, the appropriate Control Parameters are not shown. · Make sure that the VSTi is correctly selected in the VSTi Select/Input box (page 7). [. . . ]