User manual YAMAHA MOX 8 EDITOR VST

[. . . ] MOX6/MOX8 Editor VST Owner's Manual Contents What is the MOX6/MOX8 Editor VST?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Data Structure of the MOX6/MOX8 Editor VST. . . . . . . . . . . . . . . . . . . . . . . 3 Starting the MOX6/MOX8 Editor VST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 An Example of MOX6/MOX8 Editor VST in Use . . . . . . . . . . . . . . . . . . . . . 7 MOX6/MOX8 Editor VST Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 · Recording to Cubase MIDI tracks with the MOX6/MOX8 Editor VST · Recording/Editing Arpeggio playback as MIDI data on Cubase Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 · Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use. · The software and this owner's manual are exclusive copyrights of Yamaha Corporation. · Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. · Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software. [. . . ] For details, see the Voice mode (page 21). AD Same as in the Voice mode (page 21). i (Information) Same as in the Voice mode (page 21). MOX6/MOX8 Editor VST Owner's Manual 28 MOX6/MOX8 Editor VST Window: When the Voice/Song/Pattern is set to "Song" or "Pattern" (Detailed Parameter section) Detailed Parameter section This section indicates the detailed parameters of the selected category for the current Part and the Voice assigned to the current Part, or the Global settings. This section introduces what parameters belong to each of the Parameter Categories. For details about each parameters, refer to the Owner's Manual of the MOX6/ MOX8. V, M, G, F indicators Four Indicators showing the Editing Status One or more of the following four indicators are shown at the right top of the window when you edit a parameter. Indicates that the Voice edits are not stored yet as a User Voice or Mixing Voice. This indicator disappears when you execute Voice Store (page 46). Indicates that the Multi edits are not stored yet. This indicator disappears when you execute Mixing Store (page 47). Indicates that the Global edits are not stored yet. This indicator disappears when you execute Global Store (page 46). Indicates that the parameter edits are not saved yet as a file. n These indicators, "V, " "M, " "G" and "F" are linked with the small squares at the top right of "1" ­ "16" boxes and "G" box in the Mixer section. The "V, " "M" and "G" indicators disappear if you execute the Voice Store, Mixing Store and Global Store operations, respectively. The "F" indicator and the small squares at the top right of the "G" box in the Mixer section disappear only if you execute the File Save operation. All the indicators and the small squares disappear if you execute the File Save operation. Global Settings This Parameter category, called up by selecting the "G" row in the Mixer section, consists of the following sub categories. Controller Assign Clicking this in the Parameter Category section calls up the Controller Assign parameters in the Detailed Parameter section. MOX6/MOX8 Editor VST Owner's Manual 29 MOX6/MOX8 Editor VST Window: When the Voice/Song/Pattern is set to "Song" or "Pattern" (Detailed Parameter section) Multi Common This Parameter category, called up by selecting the "G" row in the Mixer section, consists of the following sub categories. Effect Clicking this in the Parameter Category section calls up the Effect-related parameters in the Detailed Parameter section. Master FX/EQ (Master Effect/EQ) Clicking this in the Parameter Category section calls up the parameters related to the Master Effect and EQ in the Detailed Parameter section. Part Common This Parameter category which is called up by selecting any of the "1" ­ "16" rows in the Mixer section consists of the following sub categories. General Clicking this calls up the GENERAL window in the Parameter Category section. This window lets you edit the Voice Common parameters such as naming and the Mixing Part parameters such as Pitch, Portamento, Note/Velocity Limit and Part EQ. In the Part Common General section, both the Mixing Part parameters (the "M" indicator appears at the top right during editing) and Voice Common parameters (the "V" indicator appears at the top right during editing) can be edited. To distinguish between them, a small dot is shown at the immediate left of the parameters. ARP (Arpeggio) Clicking this in the Parameter Category section calls up the parameters related to the Arpeggio assigned to the current Part in the Detailed Parameter section. Clicking the row of the Bank/Category/Sub/Number/Name will call up the ARP LIBRARY window which lets you use the search function for the selecting Types, as with the VOICE LIBRARY window (page 16). RCV/Control Set (Receive/Control Set) Clicking this calls up the RCV/CONTROLLER SET ASSIGN window in the Parameter Category section. This window lets you edit the Receive Switch parameters for the current Part and the Controller Set Assign parameters for the current Part and the Voice. LFO (Low Frequency Oscillator) Clicking this in the Parameter Category section calls up the LFO-related parameters of the Voice assigned to the current Part in the Detailed Parameter section. This Parameter Category is not available if the Drum Voice is assigned to the current Part. Effect Clicking this in the Parameter Category section calls up the parameters related to the Insertion Effect for the current Part and System Effect applied to all the Parts in the Detailed Parameter section. Element or Drum Key This Parameter Category is called up by selecting any of the "1" ­ "16" rows in the Mixer section. The "Element" indication appears when the Normal Voice is assigned to the current Part while the "Drum Key" is shown when the Drum Voice is assigned. The parameters belonging to this category lets you make the settings applied to each of the Elements or Drum Keys individually. For details, see the Voice mode section. AD This Parameter Category is called up by selecting the "AD" row in the Mixer section. The parameters belonging to this category lets you make the settings applied to the AD Part in the Song or Pattern mode. [. . . ] n Depending on the Arpeggio Type, different sound may be monitored compared with the one that you monitored in step 3. In such a case occurs, edit the MIDI events as described in step 5. 5. Edit the MIDI events of the recorded Arpeggio. On Cubase, select the MIDI track including the recorded events, then select [MIDI] [Open Key Editor] from the menu to call up the Key Editor window. On this window, edit the MIDI events of Arpeggio playback. [. . . ]