User manual YAMAHA MOX8 EDITOR VST INSTALLATION GUIDE (V1.5.1 OR LATER)

[. . . ] · You may use the SOFTWARE on your computer. · You may make one copy of the SOFTWARE in machine-readable form for backup purposes only, if the SOFTWARE is on media where such backup copy is permitted. On the backup copy, you must reproduce Yamaha's copyright notice and any other proprietary legends that were on the original copy of the SOFTWARE. · You may permanently transfer to a third party all your rights in the SOFTWARE, provided that you do not retain any copies and the recipient reads and agrees to the terms of this Agreement. 2. [. . . ] · Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD PARTY SOFTWARE. 7. GENERAL This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect. 8. COMPLETE AGREEMENT This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of Yamaha. Special Notices · The software and this Installation Guide are the exclusive copyrights of Yamaha Corporation. · Please read carefully the Software Licensing Agreement at the front of this Installation Guide before installing the application. · Copying of the software or reproduction of this Installation Guide in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. · Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this Installation Guide and the software. · Future upgrades of application and system software (e. g. , firmware of the products) and any changes in specifications and functions will be announced at the following website. http://www. yamahasynth. com/ · The screen displays as illustrated in this Installation Guide are for instructional purposes, and may appear somewhat different from the screens which appear on your computer. · Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. · Windows is the registered trademarks of Microsoft® Corporation. · Apple, Mac and Macintosh are trademarks of Apple Inc. , registered in the U. S. · Steinberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH. · The company names and product names in this Installation Guide are the trademarks or registered trademarks of their respective companies. MOX6/MOX8 Editor VST Installation Guide 2 Precautions when using the USB TO HOST connector When connecting the computer to the USB TO HOST connector, make sure to observe the following points. Failing to do so risks freezing the computer and corrupting or even losing the data. If the computer or the instrument freezes, turn the power to the instrument off or restart the computer. NOTICE · Before connecting the computer to the USB TO HOST connector, exit from any power-saving mode (such as suspended, sleep, standby) of the computer. · Before turning on the power to the instrument, connect the computer to the USB TO HOST connector. · Execute the following before turning the power to the instrument on/off or plugging/unplugging the USB cable to/from the USB TO HOST connector. [. . . ] After installing the audio interface driver correctly, select the audio ports in the VSTi Setup window within the MOX6/MOX8 Editor VST n When using the MIDI connection via Yamaha Steinberg USB Driver, you need to select the audio ports in the VSTi Setup window. If no audio port is selected, or no audio device is installed to the computer, an error message appears. Make sure to set the audio ports in the VSTi Setup window. Troubleshooting When starting the MOX6/MOX8 Editor VST after the installation and controlling the MOX6/MOX8 from your computer via the USB cable, the MOX6/MOX8 does not operate correctly. · Did you install the latest driver?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]