User manual YAMAHA MS150

[. . . ] Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 13 9 14 10 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. (98-6500) IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured makings identifying the terminals in your plug proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. [. . . ] · If this device should be dropped or damaged, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified Yamaha service personnel. Do not open · Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following: Power supply/Power cord · Remove the electric plug from the outlet when the device is not to be used for extended periods of time, or during electrical storms. · When removing the electric plug from the device or an outlet, always hold the plug itself and not the cord. · Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components. · Do not place the device in an unstable position where it might accidentally fall over. Location · Before moving the device, remove all connected cables. · When setting up the device, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC. By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [For business users in the European Union] If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. (weee_eu) (5)-4 Front Panel / Rear Panel ENGLISH 6 7 8 LINE 1 LINE 2 INPUT LINE OUT POWER/ON LOW HIGH VOLUME MIC INPUT -10 +10 -10 +10 MIN MAX MONITOR SPEAKER MS1013 1 2 3 4 5 1 POWER/ON switch/indicator Press this switch to switch the power between on and off. When the power is turned on, the POWER/ON indicator comes on. 6 Line 1 Input The line level output from a CD player or VCR can be connected to this RCA pin jack. 2 LOW control Turn this control clockwise to boost low frequencies and counterclockwise to reduce them. 7 Line 2 Input Any audio equipment that produces a line level output can be connected to this 1/4 inch phone jack, i. e. , synthesizer, mixer, multitrack recorder, effects unit, etc. 3 HIGH control Turn this control clockwise to boost high frequencies and counterclockwise to reduce them. 8 Line Out A multitrack recorder can be connected to this 1/4 inch phone jack for recording. Input signals from the Mic, Line 1, and Line 2 inputs are mixed, then output here. Another MS150 can be connected to this jack for parallel operation. The front panel volume knob doesn't effect the volume level of this line out. 4 VOLUME control Use this control to set the volume level. 5 MIC INPUT A dynamic type microphone can be connected to this 1/4 inch phone jack. 5 Example Set up ENGLISH Make sure all your equipment is powered off, then connect the MS150's power cable to a suitable AC receptacle. Connect your other equipment, synthesizer, CD player, etc. , to the MS150, then power on. [. . . ] 158-9 Samsung-Dong, Kangnam-Gu, Seoul, Korea Tel: 080-004-0022 BRAZIL Yamaha Musical do Brasil Ltda. Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi, CEP 04534-013 Sao Paulo, SP. BRAZIL Tel: 011-3704-1377 SPAIN/PORTUGAL Yamaha Música Ibérica, S. A. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 MALAYSIA Yamaha Music Malaysia, Sdn. , Bhd. [. . . ]