User manual YAMAHA MSP5

[. . . ] Heat -- The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. Power Sources -- The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Grounding or Polarization -- The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated. Power-Cord Protection -- Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. [. . . ] Please read this Owner's Manual thoroughly to make the best use of the MSP5's quality functions for a long period of time. PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/Power cord · Only use the voltage specified as correct for the device. The required voltage is printed on the name plate of the device. · Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it. Water warning · Do not expose the device to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings. · Never insert or remove an electric plug with wet hands. If you notice any abnormality · If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the device, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified Yamaha service personnel. · If this device should be dropped or damaged, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified Yamaha service personnel. Do not open · Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following: Power supply/Power cord · Remove the electric plug from the outlet when the device is not to be used for extended periods of time, or during electrical storms. · When removing the electric plug from the device or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it. Location · Always consult qualified Yamaha service personnel if the device installation requires construction work, and then choose mounting hardware and an installation location that can support the weight of the device, avoiding locations that are exposed to constant vibration, and making sure to use the specified hardware. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug. * This applies only to products distributed by YAMAHA KEMBLE MUSIC (U. K. ) LTD. * Illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of the product during operation. * Company names and product names used in this Owner's Manual are trademarks or registered trademarks of their respective owners. 4 MSP5--Owner's manual Front panel/Rear panel 3 4 5 NEUTRIK 2 3 1 CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. 3 POWER switch This switch turns the power to the MSP5 on and off. When you turn this switch on, the green power indicator (1) on the front panel lights up. 4 TRIM switches These switches enable you to adjust the bass and treble for the MSP5. VOL 1 2 LOW: four positions The LOW switch adjusts the bass range. With the "+1" setting, the bass range is boosted by 1. 5 dB. With the "­1" and "­2" settings, the bass range is cut by 1. 5 dB. (See performance graph. ) HIGH: three positions The HIGH switch adjusts the treble. With the "+1" setting, the treble range is boosted by 1. 5 dB. With the "­1" setting, the treble range is cut by 1. 5 dB. (See performance graph. ) 1 Power indicator This indicator lights up green when you turn the POWER switch ON (3). 2 VOL (Volume) control This control knob enables you to adjust the overall sound volume. [. . . ] Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. Dimensions H: 279 110* W: 169 * Non-skid pad positions. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 SINGAPORE Yamaha Music Asia Pte. , Ltd. No. 11 Ubi Road 1, No. 06-02, Meiban Industrial Building, Singapore Tel: 747-4374 BRAZIL Yamaha Musical do Brasil LTDA. Rebouças 2636, São Paulo, Brasil Tel: 011-3085-1377 SWEDEN Yamaha Scandinavia AB J. [. . . ]