User manual YAMAHA MT4X

[. . . ] Multitrack Cassette Recorder User's Guide Manuel de l'utilisateur Bedienungsanleitung Guía del Usuario 1 MIC/LINE GAIN GAIN 2 MIC/LINE GAIN 3 MIC/LINE GAIN 4 MIC/LINE MASTER AUX RETURN 1 1 2 ASSIGN 3 4 3 1 ASSIGN 4 2 2 LINE HIGH MIC LINE HIGH MIC LINE HIGH MIC LINE HIGH MIC LEVEL -12 MID +12 -12 MID +12 -12 MID +12 -12 MID +12 0 -12 LOW +12 -12 LOW +12 -12 LOW +12 -12 LOW +12 10 0 10 CUE LEVEL MONITOR SELECT 1 -12 AUX +12 -12 AUX +12 -12 AUX +12 -12 AUX +12 1 GROUP 2 4 STEREO 3 0 2 10 AUX 1 1 AUX 2 2 AUX 1 1 AUX 2 2 AUX 1 1 AUX 2 2 AUX 1 1 AUX 2 2 3 0 CUE 4 AUTO PUNCH 1 MEMO REPEAT 2 10 TAPE +9 6 3 0 3 6 10 -20 REC 1 2 3 4 +9 6 3 0 3 6 10 -20 L R ASSIGN 3 C PAN PAN 4 3 ASSIGN 4 C PAN 3 ASSIGN 4 C PAN 3 ASSIGN 9. 5 4. 8 C MONITOR/PHONES 4 0 10 SYNC START IN OUT 1 NOISE REDUCTION SYSTEM 2 3 TRACK 4 STEREO L ODD TAPE R EVEN MIC/ LINE L ODD TAPE R EVEN MIC/ LINE L ODD TAPE R EVEN MIC/ LINE L ODD TAPE R EVEN MIC/ LINE MIN MAX 0 10 TAPE SPEED CONTROL PITCH 4. 8 / 9. 5 O REC SELECT 1 2 3 4 REPEAT 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 SYNC CLEAR MEMO 2 AUTO PUNCH I/O CHECK MEMO 1 RETURN TO ZERO LOCATE COUNTER RESET LOCATE REHE REC/PAUSE PLAY REW FF STOP MULTITRACK CASSETTE RECORDER PHONES PUNCH I/O FCC INFORMATION (U. S. A. ) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. [. . . ] This is because of the gap between the erase head and record/playback head. Otherwise you may find that you have accidentally erased material that was before or after the re-recorded segment. 1) 2) Connect the input source, set the input select key, and adjust the GAIN control and channel fader so that the mixer setting is identical to the previous recording. Press the REC SELECT key for the track you want to punch-in. The REC SELECT - TRACK indicator on the display will flash. The indicator above the key lights and the MT4X starts the tape. 4) At the punch-in location, press the REC/PAUSE key. Note: You can practice the punch-in at this point with the rehearsal function. Press the REHE key instead of the REC/PAUSE key. The indicator above the key lights and the flashing REC SELECT - TRACK indicator will be illuminated. 5) Press the PLAY key at the punch-out location. The indicator above the REC/PAUSE key switches off and the REC SELECT - TRACK indicator resumes flashing. You could also use the STOP key or the RETURN TO ZERO key at this point. User's Guide Recording Functions 28 Using the optional footswitch Blank space Blank space Track to be re-recorded Punch-in point Play Segment to be re-recorded Punch-out point Play Stop Record Note: When you perform a punch-in/out recording, you need to find a blank section of about 1 second for your punch-in and punch-out locations. This is because of the gap between the erase head and record/playback head. Otherwise you may find that you have accidentally erased material that was before or after the re-recorded segment. 1) 2) Connect the input source, set the input select key, and adjust the GAIN control and channel fader so that the mixer setting is identical to the previous recording. Plug an optional FC5 footswitch into the PUNCH I/O footswitch connector (e). Note: Yamaha supplies an optional footswitch, FC5. Using another manufacturer's footswitch may cause mis-timing. 3) Press the REC SELECT key for the track you want to punch-in. The REC SELECT - TRACK indicator on the display will flash. Note: You can practice the punch-in at this point with the rehearsal function. [. . . ] Each track can be independently recorded at an optimum level, and then mixed, equalized, processed, and panned into a final mixdown. Overdub recording Recording one track while listening to another track or tracks. The process of overdubbing can also be implemented by a synthesizer synchronized to a sync track. Pan A control that sets the relative position of a sound in a stereo image. [. . . ]