User manual YAMAHA MX-460

[. . . ] Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i. e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: ­ Other components, as they may cause damage and/or discoloration on the surface of this unit. [. . . ] · Do not shake or move the remote control during the test tones are being output. · Do not cover the my beam microphone on the remote control during the test tones are being output. · The batteries in the remote control may be week if the remote control does not function properly. In such case, replace all the batteries and then try the procedure again. 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press and hold MY BEAM on the remote control more than 2 seconds. A test tone is output twice from this unit. Keep pointing the remote control toward this unit during the test tones are being output so that the my beam microphone can collect the test tones. Control range: L50° to R50° Operation guarantee range: 6 m, L30° to R30° MY BEAM 5 48 En PLAYING BACK SOUND CLEARLY (My beam) Using manual-adjust function You can adjust the beam angle manually while playing back an input source. This function is also ideal if the listening position is out of the operation guarantee range of the auto-adjust function. 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press MY BEAM on the remote control. MY BEAM is displayed in the front panel display. MY BEAM 5 3 Press / while MY BEAM is displayed to adjust the angle. Control range: L90° to R90° · Press repeatedly to increase the horizontal angle on the left side. · Press repeatedly to increase the horizontal angle on the right side. This program reproduces the energetic environment of live sports broadcasting, converging a commentator's voice on the center and broadening the overall atmosphere of the stadium, and lets you feel as if you are seated at an actual stadium or a ball park. Concert Hall Music Jazz Club Sci-Fi Spectacle Adventure BASIC OPERATION SPORTS Sports English 51 En USING SOUND FIELD PROGRAMS Turning on CINEMA DSP programs You can select from three different sound field programs (MUSIC, MOVIE and SPORTS) depending on the type of sources you want to enjoy. Notes · The CINEMA DSP programs are not available if the stereo playback (see page 47) or the my beam (see page 48) is selected as the beam mode. · If the CINEMA DSP programs are not available, "Prohibit" appears in the front panel display when you press one of the sound field program buttons on the remote control. 3 Check that MUSIC is displayed in the front panel display and then press MUSIC on the remote control repeatedly (or press / on the remote control) to switch between the music sound field programs. VOL MUSIC 5BEAM ST+3BEAM 3BEAM 7 or ENTER 1 STEREO 2 5 MOVIE 3 6 SPORTS MY BEAM SURROUND 4 MUSIC 7 OFF 8 +10 9 Music Video Concert Hall Jazz Club y For detailed descriptions of each sound field program, see "Sound field program descriptions" on page 51. 0 CH LEVEL MENU TV/AV ENTER YSP TEST RETURN Music programs Select this sound field program when you play music sources. This program produces a vibrant atmosphere and lets you feel as if you are seated in an actual rock or jazz concert hall. Movie programs Select this sound field program when you play movie sources, especially the ones encoded in Dolby Digital, DTS or Dolby Surround. This program clearly reproduces dialog and sound effects, thus creating a broad and expansive cinematic space amid silence. 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press MUSIC on the remote control to select the music sound field program. MUSIC 2 7 Press MOVIE on the remote control to select the movie sound field program. MOVIE 8 52 En USING SOUND FIELD PROGRAMS 3 Check that MOVIE is displayed in the front panel display and then press MOVIE on the remote control repeatedly (or press / on the remote control) to switch between the music sound field programs. VOL MOVIE 8 or ENTER Sci-Fi Spectacle Adventure y For detailed descriptions of each sound field program, see "Sound field program descriptions" on page 51. BASIC OPERATION Sports program Select this sound field program when you play sports sources. This program densely concentrates the vocal sound of the commentator in the center while broadening the sound from the audience or the environment all around your listening room. 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press SPORTS on the remote control to select the sports sound field program. SPORTS 9 VOL English y · There is only one sports sound field program available. · For detailed descriptions of each sound field program, see "Sound field program descriptions" on page 51. 53 En USING SOUND FIELD PROGRAMS Turning off CINEMA DSP programs Turn off the CINEMA DSP programs if you want to enjoy the original sound without the sound field program effect. Adjusting CINEMA DSP effect levels You can enjoy good quality sound with the factory preset parameters. However, you can also adjust the effect level of the CINEMA DSP programs relative to the level of the direct sound so that each sound field program can reflect your listening environment and your preference even more accurately. 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press OFF on the remote control to turn off the sound field programs. CINEMA DSP OFF is shown in the front panel display. OFF 2 0 Press MUSIC, MOVIE or SPORTS on the remote control to select the desired sound field program. MUSIC MOVIE SPORTS 7 VOL or 8 or 9 3 Press / on the remote control. DSP LEVEL is shown in the front panel display. VOL 4 Press / on the remote control to adjust the effect level of the CINEMA DSP programs. ENTER Control range: ­6 dB to +3 dB · A larger value increases the effect level. · A smaller value decreases the effect level. 54 En USING THE VOLUME MODE (NIGHT LISTENING MODE/TV VOLUME EQUAL MODE) USING THE VOLUME MODE (Night listening mode/TV volume equal mode) The night listening modes are designed to improve listenability at lower volumes or at night. [. . . ] DVD-Player halten Sie sich an die Betriebsanleitung, die dem jeweiligen Gerät beilag. Vor Durchführung der nachfolgenden Anweisungen stellen Sie die Lautstärke dieses Gerätes auf 30 dB ein. In Schritt 4 stellen Sie die Lautstärke gegebenenfalls auf das endgültige Maß. 1 Betätigen Sie auf der STANDBY/ON POWER POWER AV TV 6 Die folgenden Punkte prüfen Ist das Optimierungsmikrofon einwandfrei an dieses Gerät angeschlossen?Ist das Optimierungsmikrofon korrekt aufgestellt? [. . . ]