User manual YAMAHA MY8-SDI-ED

[. . . ] Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit "OFF" and "ON" please try to elimi, nate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. [. . . ] This card also enables you to embed the audio output signals of a host device into one or two audio groups to be output as an HD/ SD-SDI signal. To take full advantage of the superior functionality of the MY8-SDI-ED and enjoy years of trouble-free use, please read this manual before you begin using the product. About the host devices in which the MY8-SDI-ED can be installed Before installing the card in a host device, please check to make sure that the device is compatible with the card and check possible restrictions regarding the maximum number of Yamaha and third-party expansion cards that can be simultaneously installed. Refer to the owner's manual supplied with the host device and/or Yamaha Pro Audio web site. Yamaha Pro Audio website: http://www. yamahaproaudio. com/ Installation information Please refer to the owner's manual supplied with the host device for installation information. In addition to securing the card in place, the fixing screws at the left and right of the card function as electrical grounds. Be sure to screw them in tightly. Accessories Owner's Manual (this document) MY8-SDI-ED Owner's Manual 5 Part Names and Functions Panel 4 5 1 1 INPUT Connector 2 3 This is a BNC connector that inputs HD/SD-SDI signals. To use the card on a host device, you must always input SDI signals to the INPUT connector. 2 THRU Connector This is a BNC connector that outputs re-clocked HD/SD-SDI signals. 3 OUT1, OUT2 Connectors These are BNC connectors that output HD/SD-SDI signals. The same signals will be routed to both the OUT1 and OUT2 connectors. Note: We recommend that you use a 5C-FB coaxial cable, or a coaxial cable that features excellent performance equivalent to that of the 5C-FB cable. The 5C-FB cable transmits HD-SDI signals over a distance of up to 130 meters, and SD-SDI signals up to 150 meters. 4 SDI STATUS LEDs [IN] LED: [A1-4] LED: [A5-8] LED: [OUT] LED: Indicates the status of SDI inputs. Indicates the status of input ports 1 through 4. Indicates the status of input ports 5 through 8. Indicates the status of SDI outputs. 6 MY8-SDI-ED Owner's Manual If no errors have occurred, the LED indicators will light green. If an error has occurred, you will be able to identify the type of error based on the status of the LED indicators as shown in the list below. LED Indicator Off (dark) Solid red Flashing red SDI STATUS LED [IN]/[OUT] [A1­4]/[A5­8] [IN]/[OUT] [IN] [A1­4]/[A5­8] [IN]/[OUT] Solid orange [A1­4]/[A5­8] Description of Error No SDI input is detected or routed. An invalid format signal is being input to the SDI input. An error has occurred in the video signal of the SDI input/output. An error has occurred in the selected audio group data. Note: If multiple errors have occurred simultaneously, the priority of the SDI STATUS LEDs indication is the descending order of the list above. 5 GROUP SELECT Switches Selects a group of audio input/output signals. Move the switches down to set them to ON. Note: Do not change the switch settings if the host device is powered on. Otherwise, noise may be generated. · [IN 1­4] These switches enable you to turn ON up to two SDI signal groups that you want to input to the slot (host device). Audio signals can be de-embedded from a selected group and routed to input ports 1­4 and 5­8 of the slot. · [OUT 1­4] These switches enable you to turn ON up to two SDI signal groups that you want to output from the slot (host device). [. . . ] Tel: 02-2511-8688 THAILAND Siam Music Yamaha Co. , Ltd. 4, 6, 15 and 16th floor, Siam Motors Building, 891/1 Rama 1 Road, Wangmai, Pathumwan, Bangkok 10330, Thailand Tel: 02-215-2626 OTHER ASIAN COUNTRIES Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2317 ASIA THE PEOPLE'S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co. , Ltd. 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China Tel: 021-6247-2211 INDIA Yamaha Music India Pvt. 5F Ambience Corporate Tower Ambience Mall Complex Ambience Island, NH-8, Gurgaon-122001, Haryana, India Tel: 0124-466-5551 INDONESIA PT. [. . . ]