User manual YAMAHA NS-10MMTS

[. . . ] A vessel with water in it If the vessel falls by vibrations and water spills, it may cause damage to the speakers, and/or you may get an electric shock. Do not place the speakers where foreign objects such as water drips might fall. It might cause a fire, damage to the speakers, and/or personal injury. [. . . ] (Hole depth : 10 mm) Mounting bracket Screw Pad WARNING This speaker weighs 1. 5 kg (3 lbs. Do not mount it on thin plywood or a wall with soft surface material. If mounted, the screws may come out of the flimsy surface and the speaker may fall. This damages the speaker or causes personal injury. Do not install the speaker to a wall with nails, adhesives, or any other unstable hardware. Longterm use and vibrations may cause it to fall. To avoid accidents resulting from tripping over loose speaker cable, fix it to the wall. This speaker features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color. Should this happen, move the speaker away from the TV set. E-2 English CONNECTIONS TO YOUR AMPLIFIER Before making connections, make sure that the amplifier is switched off. I CONNECTIONS · Connect the screw-type input terminals at the rear of the speaker to the speaker output terminals of the amplifier (or receiver) with the speaker cable. · Connect the (+) terminals on the amplifier (or receiver) and the speaker using one side of the cable. Connect the (­) terminals on both components using the other side of the cable. · Connect the speaker to the rear center terminals of your amplifier (or receiver), making sure not to reverse the polarity (+, ­). If the speaker is connected with reversed polarity, the sound will be unnatural and lack bass. 2 Remove the insulation coating at the extremity of each speaker cable by twisting the coating off. [. . . ] Speaker cable (10m) x 1 Mounting bracket x 1 Screw x 2 Pad x 2 Note When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools. G Specifications are subject to change without notice due to product improvements. G Care should be taken not to exceed the input power values noted above. E-4 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE. , BUENA PARK, CALIF. 135 MILNER AVE. , SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G. m. b. H. [. . . ]