User manual YAMAHA NS-9595

[. . . ] q Do not place the speaker where it is liable to be knocked over or struck by falling objects. Stable placement will also ensure better sound performance. q Placing the speakers on the same shelf or rack as the turntable can result in feedback. [. . . ] q Secure placement or installation is the owner's responsibility. YAMAHA shall not be liable for any accident caused by improper placement or installation of the speaker. Install on a wall or place on a shelf and angle toward the main listening position for a fuller surround sound in a multi channel system. Determine the best position and angle for the speakers by following the guidelines in the owner's manual supplied with your amplifier. q Mounting the speaker on a wall Mount the speakers on a wall by using the bracket provided on the back of the speaker. Fasten screws into a firm wall or wall support as shown in the diagram, and hang the holes of the mounting bracket on the protruding screws. Diam. 20 mm 2 mm Tapping screw (Available at a hardware store) Wall or wall support PLACING THE SPEAKERS Place the speakers on a sturdy, vibration-free surface, on a wellbuilt stand. You can also use the screw holes on the back of the speaker to mount the speakers on a wall. s Using as 2ch stereo speakers Better stereo images will be obtained when the speakers are slightly angled in towards the listeners. 60 mm s Using as main speakers in a multi channel system Position the speakers on both sides of the TV. The positioning of speakers is important, because it controls the whole sound quality of a multi channel system. 200 W Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 dB/2. 83 V/m Crossover Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 kHz Dimensions (W x H x D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 x 310 x 177 mm Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 kg q SPEAKERS R L Speakers output terminals of the amplifier A + ­ ­ + B Amplifier or Receiver s Connections Connect the screw-type input terminals at the rear of the speakers to the speaker output terminals of your amplifier with the speaker cables. q Connect the (+) terminals on both the amplifier and the speakers using one side of the cable. Connect the (­) terminals on both components using the other side of the cable. [. . . ] q Connect the (+) terminals on both the amplifier and the speakers using one side of the cable. Connect the (­) terminals on both components using the other side of the cable. q Connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals, making sure not to reverse the polarity (+, ­). [. . . ]