User manual YAMAHA NS-P125
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual YAMAHA NS-P125. We hope that this YAMAHA NS-P125 user guide will be useful to you.
Lastmanuals help download the user guide YAMAHA NS-P125.
Manual abstract: user guide YAMAHA NS-P125
Detailed instructions for use are in the User's Guide.
[. . . ] A vessel with water in it If the vessel falls by vibrations and water spills, it may cause damage to the unit, and/ or you may get an electric shock. · Do not place the speakers where foreign objects such as water drips might fall. It might cause a fire, damage to this unit, and/or personal injury. · Do not place the speakers where they are liable to be knocked over or struck by falling objects. [. . . ] 3. 5 to 4 mm (1/8")
English
Min. 20 mm (3/4") 3 mm (1/8") Tapping screw (commercially available)
Holes
Wall or wall support
Make sure that the screws are caught by a narrow part of the holes securely.
26 mm (1")
WARNING: · Each speaker weights 2 kg (4. 4 lbs). Do not mount them on thin plywood or soft wall surface material, as the screws may come out of the flimsy surface, causing the speakers to fall down and be damaged, or result in personal injury. · Do not fasten the speakers to wall with nails, adhesives, or other unsound hardware. Long term use and vibrations may cause them to fall down. · To avoid accidents resulting from tripping over loose speaker cords, fix them to the wall. Note: You can also use the screw holes on the bottom of the NS-M125 for installing the speakers on commercially available speaker stands.
A screw with a diameter of 6 mm (1/4") can be used (Hole depth: 20 mm, 3/4") 60 mm (2-3/8")
· Before installing, please refer to the instruction manual of the speaker stand.
E-3
Placing the center speaker NS-C125
Place the speaker on the floor under the TV or inside the TV rack so that it is stabilized.
Mounting the center speaker NS-C125 on the wall
The speaker can be mounted on a wall by using the bracket attached to the speaker's back panel.
Holes
Make sure that the screws are caught by a narrow part of the holes securely. When placing the speaker on top of the TV To prevent the speaker from falling down, put the provided fasteners at two points on both bottom of the speaker and top of the TV.
NS-C125 Peel off the seal 292 mm (11-1/2")
Fasten screws into a firm wall or wall support as shown in the figure below, and hang the holes on the protruding screws.
NS-C125
1
Fastener TV set
2
Diam. 20 mm (3/4") Wall or wall support 3 mm (1/8") Tapping screw (commercially available)
Notes: · Do not place the speaker on top of the TV whose area is smaller than the bottom area of the speaker. If placed, the speaker may drop out causing an injury to you. · Do not place the speaker on top of the TV with an inclination. · Do not touch the adhesive surface after peeling off the seal as this will weaken its adhesive strength. · Thoroughly wipe clean the surface where the fastener is to be applied. Note that adhesive strength is weakened if the surface is dirty, oily or wet and that this may cause the center speaker to drop.
WARNING: · The speaker weights 2 kg (4. 4 lbs). Do not mount them on thin plywood or soft wall surface material, as the screws may come out of the flimsy surface, causing the speakers to fall down and be damaged, or result in personal injury. · Do not fasten the speakers to wall with nails, adhesives, or other unsound hardware. Long term use and vibrations may cause them to fall down. · To avoid accidents resulting from tripping over loose speaker cords, fix them to the wall.
E-4
Connecting Your Speakers
Always turn off your amplifier or receiver before making any connections.
English
Preparing Your Speaker Cables
Carefully remove 10 mm (3/8 ")of insulation from both ends of your speaker cables and twist the bare wires tightly, as shown.
10 mm (3/8 ")
Good
No Good
Hookup
NS-C125
CENTER
R
FRONT OR SURROUND
L
Amplifier or receiver
+
Tighten Loosen
+
NS-M125
Notes: · Make sure that the bare wires are not touching each other as this could damage the speaker and amplifier. · Connect one speaker to the left terminals of your amplifier, and another speaker to the right terminals, making sure not to reverse the polarity (+, ). If one speaker is connected with reversed polarity, the sound will be unnatural and lack bass.
Using a Banana Plug
1. [. . . ] Cet appareil utilise principalement de la soudure sans plomb. Dieses Produkt verwendet hauptsächlich bleifreies Lot. Este producto utiliza principalmente soldadura sin plomo.
YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA
©2004
All rights reserved.
ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE. , BUENA PARK, CALIF. 135 MILNER AVE. , SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G. m. b. H. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA NS-P125 Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service. Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA NS-P125 will begin.