User manual YAMAHA NS-PA120

[. . . ] € Containers of liquid, as they might spill and cause electric shock to the user or damage to the speakers. Do not place the speakers where they are liable to be knocked over or struck by falling objects. Placing the speakers on the same shelf or rack as the turntable can result in feedback. Any time you note distortion, reduce the volume control on your amplifier to lower setting. [. . . ] Wall/wall support 26 mm (1") NS-B150 1 2 Install screws into a solid wall or wall support as shown in the illustration. Hang each speaker by its keyhole slots onto the protruding screws. English Note 3 mm (1/8") Minimum 20 mm (3/4") • Make sure the shaft of the screw is seated in the narrow part of the keyhole slot. Do not mount the speakers on thin plywood or on a wall with a soft surface material. Otherwise, the screws may pull out of the surface and the speakers may fall, possibly damaging the speakers or causing personal injury. € Do not affix the speakers to a wall using nails, adhesives, or unstable hardware. Long-term use and vibration may cause the speakers to fall. € To avoid accidents resulting from tripping over loose speaker cables, affix the cables to the wall. € Mount the speakers in a wall location that will be unlikely to result in injury to an individual’s head. € When using speaker brackets (commercially available) to mount the speakers on the wall or ceiling, we strongly recommend using safety wire (may be supplied with the bracket) between the speaker and bracket to prevent the speaker from falling. € When installing these speakers on a wall mounted bracket, it is essential that they are firmly secured. Be sure to consult a reliable source about the best type of fastener for your particular wall / ceiling’s construction. 210 mm (8-1/4") NS-C150 ■ Mounting the center speaker on the Yamaha YTS-F500/YTS-T500 TV stand You can use the screw holes [diameter: 6 mm (1/4"), hole depth: 16 mm (5/8")] on the rear of this unit to mount the speaker on the YTS-F500/YTS-T500. For installation details, please refer to the owner’s manual that came with the YTS-F500/YTS-T500. NS-C150 Rear view 290 mm (11-1/2") 95 mm (3-3/4") Use speaker bracket “B” that came with the YTS-F500/YTS-T500. Insert screws “D (M6 x 16)” that came with the YTS-F500/YTS-T500 into the screw holes. NS-C150 (Installation example using YTS-F500) Notes • Be careful not to pinch the speaker cables between the speaker and the speaker bracket or speaker stand. € Do not lean or place any object on the speaker. Otherwise, the TV stand bracket may be deformed. 3 En Connecting the speakers Connecting the speakers Caution: Make sure the power cables for your other AV components are disconnected from the AC wall outlets before making any connections. Connection diagram Front speakers Right Left Center speaker Amplifier Note: The exact layout of the speaker terminals depends on your amplifier. Right Left Right Left Surround speakers Surround back speakers (NS-PA150 only) ■ Preparing the speaker cables Once you’ve positioned the speakers, you’ll need to prepare the speaker cables for connecting the speakers. [. . . ] If you experience any difficulty, please contact Yamaha representative office in your country. You can find full details on our website (http://www. The product is guaranteed to be free from defects in workmanship or materials for a period of two years from the date of the original purchase. Yamaha undertakes, subject to the conditions listed below, to have the faulty product or any part(s) repaired, or replaced at Yamaha’s discretion, without any charge for parts or labour. [. . . ]