User manual YAMAHA NTX900FM

[. . . ] Retain this Owner's Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. SAFETY INSTRUCTIONS 1 2 3 4 5 Read Instructions ­ All the safety and operating instructions should be read before the unit is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the unit and in the operating instructions should be adhered to. Follow Instructions ­ All operating and other instructions should be followed. [. . . ] 15) + CDX-596 and NTX900FM only OUTPUT LEVEL (p. 10) The shaded parts ( ) vary between models. E-7 This manual describes how to operate this unit by using the remote control. To operate this unit from the front panel, use the corresponding buttons on the front panel. BASIC OPERATION NATURAL SOUND COMPACT DISC PLAYER SYNCHRO DIMMER OPEN/ CLOSE 1 SPACE PEAK 2, 3 4 POWER TAPE CLEAR PROG 2 3 REPEAT RANDOM 1 Press POWER to turn on the power. 3 Press OPEN/CLOSE to close the disc tray. OPEN/ CLOSE POWER 2 Press OPEN/CLOSE to open the disc tray, and load a disc. Label side up. OPEN/ CLOSE 4 Press (or ) to begin play. Disc tray Play will begin from the first track of the disc. Display information CDX-596 1 11 12 2 3 4 5 6 7 8 9 10 3 1 Shows the track number selected or being played. 2 Displays the numbers that correspond to the numbers of tracks (as high as number 20) on the disc. After each track is played, its corresponding number disappears so the number of remaining tracks (and their numbers) can be seen at a glance. 3 CDX-596 and NTX900FM only Shows the level of signals output into an amplifier or the headphone level adjusted by pressing ­ OUTPUT LEVEL +. (Refer to "Changing displays" on page 11. ) 4 NTX900FM, CDX-396 1 4 3 2 E-8 English To pause play Press . To play directly from the desired track Select a desired track by using the numeric buttons. CDX-596 To resume play, press again (or press ). * on the front panel can also be used to stop play temporarily or to resume play. 5 The selected track number is displayed NTX900FM, CDX-396 To stop play Press . To select track number 10 or higher Press +10 to select the first digit and then press a numeric button (1­0) to select the second digit. Example: To select track 25 Press +10 twice, then immediately press 5 once. +I0 5 + To turn off the power Press POWER again. This indication appears while the unit is mixing up tracks. RANDOM To cancel random-sequence play Press or RANDOM. Total remaining time on the disc will not be displayed during random-sequence play. CDX-596 and NTX900FM only If the power is switched off during random-sequence play, pressing POWER again to turn on the unit will automatically restore random-sequence play. RANDOM or REPEAT PLAY You can play any desired track or the entire disc repeatedly by pressing REPEAT. The repeat play mode will change whenever you press REPEAT. SINGLE REPEAT (S) CDX-596 A single track is played repeatedly. * This also works for programmed play and random-sequence play. (If repeat play is switched off, programmed play or random-sequence play will be resumed. ) (off) FULL REPEAT (F) REPEAT S All tracks (the entire disc) are played repeatedly. * During programmed play, all programmed tracks are played repeatedly. * During random-sequence play, all randomly sequenced tracks are played repeatedly in the same order. * CDX-596 and NTX900FM only If the power is switched off during FULL REPEAT play, pressing POWER again to turn on the unit will automatically restore FULL REPEAT play. REPEAT F REPEAT NTX900FM, CDX-396 (off) SINGLE REPEAT FULL REPEAT E-13 PROGRAM PLAY You can enjoy listening to your favorite tracks in any desired order by programming tracks. As many as 40 tracks can be programmed in sequence. TAPE CLEAR PROG 2, 4 5 3 REPEAT RANDOM 1 2 3 4 5 6 3 1 Press to stop the unit. 7 8 9 0 +I0 INDEX 1 Program a desired track by pressing the corresponding numeric button. 6 Repeat this operation to program more tracks. You can select the same track again. 2 Press PROG. NTX900FM, CDX-396 PROGRAM When programming is finished, press PROG. PROG PROG 5 Press to begin play. TOTAL Blinks. Display information during programming CDX-596 PROGRAM 1 6 1 Shows the program number for the track to be programmed next. 2 Shows the selected track number. [. . . ] 2 Hz ­ 20 kHz, ±0. 5 dB Harmonic distortion + noise (1 kHz) <CDX-596> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 0025% or less <NTX900FM, CDX-396> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 003% or less S/N ratio English General Power requirements U. S. A. and Canada models . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]