User manual YAMAHA P4050

[. . . ] 9 EG Sustain Level (31) EG Sustain Level messages are received but not transmitted. 10 Hold 1 (64) Hold 1 messages are received but not transmitted. 11 Portamento Switch (65) Portamento Switch messages are received but not transmitted. 12 Sostenuto (66) Sostenuto messages are received but not transmitted. [. . . ] 13 Harmonic Content (71) Harmonic Content messages are received but not transmitted. 14 EG Release Time (72) EG Release Time messages are received but not transmitted. 15 EG Attack Time (73) EG Attack Time messages are received but not transmitted. 16 Brightness (74) Brightness messages are received but not transmitted. 17 EG Decay Time (75) EG Decay Time messages are received but not transmitted. 21 Data Increment (96), Decrement (97) Data Increment and Decrement messages are received but not transmitted. 23 HH Controllers (1 to 95) If, on the Menu area's Kit/Pad page, the HH Func parameter is set to "MIDI" and the HH MIDI Type parameteris set to any value between "CC01" and "CC95", a Control Change message with the corresponding control change number will be sent whenever the hi-hat controller is pressed. 24 Kit Transmit MIDI (1 to 95) If the CC No parameter from the Menu area's Kit/MIDI/Other page is set to a value between "1" and "95" for a specific kit, a Control Change message with the corresponding control change number will be sent whenever that kit is selected. 25 MIDI Message Type (1 to 95) If the MessageType parameter from the Menu area's Kit/MIDI/Assign page is set to "CC" for a specific pad, a Control Change message with the control change number specified by the CCNo parameter from the Menu area's Kit/MIDI/Other page will, upon striking of that pad, be sent via the MIDI OUT connector but not to the internal tone generator. Upon receipt of this message, the P4050 transmits an Identity Reply message. Identity Request messages are received but not transmitted. 3 Identity Reply $F0 $7E $7F $06 $02 $43 $00 $41 $3A $06 $00 $00 $00 $7F $F7 Identify Reply messages are transmitted but not received. MIDI Master Volume messages are received but not transmitted. Upon receipt of an XG System On message, the P4050 acts in the same way as if a General MIDI System On message had been received. XG System On messages are received but not transmitted. IfthePCparameterfromtheMenuarea'sKit/MIDI/Otherpageisset for a specific kit, a Program Change message with the corresponding number will be sent whenever that kit is selected. â· IftheMessageTypeparameterfromtheMenuarea'sKit/MIDI/Assign page is set to "PC" for a specific pad, a Program Change message with the number specified by the PC parameter from the Menu area's Kit/MIDI/Other page will, upon striking of that pad, be sent via the MIDI OUT connector but not to the internal tone generator. â· IfthePCparameterfromtheMenuarea'sSong/MIDIpageissetfor a specific song, a Program Change message with the corresponding number will be sent whenever that song is selected. [. . . ] â· IfthePCparameterfromtheMenuarea'sSong/MIDIpageissetfor a specific song, a Program Change message with the corresponding number will be sent whenever that song is selected. Song Select messages are received but not transmitted. If the MIDI Sync parameter from the Menu area's Utility/MIDI page is set to "ext" or "auto", playback will be synchronized with Timing Clock messages received from an external MIDI device. If the SeqCtrl parameter from the Menu area's Utility/MIDI page is set to "off", the P4050 will neither transmit nor receive Start, Continue and Stop messages. [. . . ]