User manual YAMAHA PC-100

[. . . ] In addition, you get incredible realism from most of surround-sound encoded video sources available in the market using the builtin Dolby Pro Logic Surround Decoder, Dolby Digital Decoder and DTS Decoder. Seven built-in channels of amplification on this model mean that no additional amplifiers are required to enjoy advanced digital sound field processing. Rather than tell you about the wonders of digital sound field processing, however, let's get right down to the business of setting up the system and trying out its many capabilities. Please read this operation manual carefully and store it in a safe place for later reference. English CONTENTS CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If so, press the TUNING MODE button so that the "AUTO" indicator goes off from the display. Though the reception mode is changed to monaural by this operation, when you change the display to an RDS mode, RDS data may be displayed. · If the signal strength becomes weakened by external interference when receiving an RDS station, the RDS data service may be cut off suddenly and ". . . WAIT" will light up on the display. 49 BASIC OPERATION Selecting your desired program type from among preset RDS stations (PTY SEEK) By designating a program type, the unit automatically searches all preset stations for an RDS station which broadcasts a program of that program type. * There are 15 program types for classifying RDS stations. For details, refer to page 48. NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch INPUT SELECTOR 20 VOLUME l6 l2 28 8 STANDBY/ON 40 4 INPUT MODE 60 2 0 ­dB SPEAKERS A B PROGRAM EFFECT EXT. DECODER A/B/C/D/E PRESET STATIONS TUNING PTY SEEK RDS MODE PRESET /TUNING EON MODE START TUNING MODE AUTO/MAN'L MONO FM/AM EDIT MEMORY PHONES BASS TONE EXTENSION BYPASS 2 3 4 BASS l 0 l 2 3 4 5 5 2 3 4 TREBLE l 0 l 2 3 4 5 5 BALANCE l 2 3 4 L5 0 l 2 3 4 5R REC OUT DVD/LD TV/DBS VCR 1 VCR 2 VIDEO AUX SOURCE TAPE/MD CD TUNER PHONO MAN'L/AUTO FM VIDEO AUX 21 1 Set the unit in the PTY SEEK mode. 3 3 Begin searching all preset RDS stations. PTY SEEK PTY SEEK MODE START MODE START Flashes. * The program type of the station now being received or "NEWS" flashes on the display. TAL LOGIC PS RT STERE EON SPOR 2 P Select the desired program type. Flashes. PRESET STATIONS TUNING * The "PTY HOLD" indicator will be illuminated on the display. · · · If a station which broadcasts the program type you selected is found, the unit stops at the station and the display shows its frequency after showing the flashing name of the program type. If the selected station is not the desired one, press the PTY SEEK START button once more. The unit begins searching for another station which broadcasts the same program type. To stop the search, press the PTY SEEK START button once more. To cancel this function If the PTY SEEK MODE button is pressed once more, the PTY SEEK mode will be canceled. 50 BASIC OPERATION English Automatic selection of desired program when broadcasting starts This function uses the EON (Enhanced Other Networks) data service on the RDS station network. So, when you select the same input source the next time, the same program will be automatically recalled. q If you prefer to cancel the DSP, press the EFFECT button. The sound will be the normal 2-channel stereo without surround sound effect. q When a monaural sound source is played with the program PRO LOGIC (Normal/Enhanced), a proper effect will not be obtained. Moreover, sound may become unnatural depending on the settings of the speaker output modes (1A to 1D) in the SET MENU mode. q When this unit's Dolby Pro Logic Surround decoder, Dolby Digital decoder or DTS decoder is used, if the main-source sound is considerably altered by overadjustment of the BASS or TREBLE control, the relationship between the center and rear channels may produce an unnatural effect. q When a source of signals input to the EXTERNAL DECODER INPUT terminals of this unit is selected, the DSP cannot be used and the EFFECT button also will not function. 53 BASIC OPERATION To enjoy a video source encoded with Dolby Pro Logic Surround, Dolby Digital or DTS When you select the program No. 10, 11 or 12, and the input signal of the source is 2-channel stereo, Dolby Pro Logic Surround is decoded. When some program is selected and the input signal of the source is encoded with Dolby Digital, Dolby Digital is automatically decoded. When some program is selected and the input signal of the source is encoded with DTS, DTS is automatically decoded. The following indicators on the display panel show you what sound processing is being made. Note If you change the LD (or CD) being played back with DTS decoded to another disc not encoded with DTS when the red "dts" indicator is illuminated, playing back the newly selected disc will output no sound. [. . . ] 1 Vp-p/75 ohms C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 286 Vp-p/75 ohms Maximum Input Level . . . . . . . More than 1. 5 Vp-p Signal-to-Noise Ratio . . . . . . . . . . . More than 50 dB Monitor Out Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]