User manual YAMAHA PCY130

[. . . ] · To clean the product, please wipe with a soft cloth or a damp cloth that been wrung out thoroughly, If the product is soiled, use a neutral detergent on a cloth then wipe with a damp cloth that has been wrung out thoroughly to remove any remaining detergent. Do not use benzine, thinner or alcohol as it may result in discoloration or deformation. Also pay close attention so as not to let the water and detergent come into contact with the cushions used in the product, it may result in deterioration. [. . . ] When using the stopper, please attach as shown in the illustration. Function of the PCY130/130S/150S varies according to which INPUT number on the DTX Series Drum Trigger Module the pad is connected. The chart below describes its function in relation to input numbers. * Make sure you set the module's pad type setting to cymbal. (Refer to the Owner's Manual that came with your module. ) Module Input Number PCY130 PCY130S PCY150S A single voice can be assigned to, and produced by the pad. Independent voices can be assigned to and produced by the pad and edge section (Dual Zone; The cup and pad sections share the same voice). A choke function (grabbing the edge section stops the voice being produced by the pad) is also available. Independent voices can be assigned to and produced by the pad section, and the edge/cup sections (Dual Zone; The edge and cup sections share the same voice). A choke function (grabbing the edge section stops the voice being produced by the pad) is also available. Independent voices can be assigned to and produced by the pad section, edge switch, and cup section (3 Zone). A choke function (grabbing the edge stops the voice being produced by the pad) is also available. Independent voices can be assigned to and produced by the pad and cup section (Dual Zone; the edge switch is inactive). A mute function (holding the edge section produces an alternate sound when the pad is hit) is also available. Wing Nut Felt * 1. First, insert the stopper underneath the cymbal support, and then use a drum key (optional) to secure. Cymbal Support Stopper 2 Set the PCY130/130S/150S so that the rotation stopper plate fits between the rotation stopper ribs located on the underside of the PCY130/130S/150S. * The PCY130/130S/150s is supplied with thin felts. Pad vibration can be adjusted by using these felts in place of those that came with the rack system or cymbal stand. Rotation Stopper Ribs * Make sure a stereo phone cable is used when connecting the PCY130S/150S to the module. The switch functions described above will not function with a monaural phone cable. [. . . ] The model number, serial number are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase. The edge or cup sections do not produce sound when struck. The Mute or Choke functions do not work. [. . . ]