Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual YAMAHA PF1000E1. We hope that this YAMAHA PF1000E1 user guide will be useful to you.
Lastmanuals help download the user guide YAMAHA PF1000E1.
Detailed instructions for use are in the User's Guide.
[. . . ] Owner's Manual
Before using the PF-1000, be sure to read "Precautions, , on pages 3-4.
IMPORTANT
Check your power supply Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. [. . . ] The entered data can be edited from the SONG CREATOR (CHD) display (page 104). Finally, press the [F] (EXPAND) button from the SONG CREATOR (CHD) display in order to convert the input data into song data.
To enter a fill-in, press the [AUTO FILL IN] button and press one of the MAIN [A] [D] buttons.
END Mark An "END" mark is shown in the display, indicating the end of the song data. The actual position of the End mark differs depending on the section that is input at the end of the song. When an Ending section is input, the End mark automatically follows the Ending data. When a section other than Ending is input, the End mark is set two measures after the final section. The End mark can be freely set to any position desired.
98
PF-1000
Recording Your Performances and Creating Songs-- Song Creator
Select the Recording Options: Starting, Stopping, Punching In/Out -- Rec Mode
From this display you can set up how recording is started and stopped for either Quick Recording or Multi Recording. To call up these settings, select the REC MODE display by using the [BACK][NEXT] button, after performing operation steps 1 - 3 on page 94.
These settings determine how recording will start. Normal Overwrite recording starts when you press the SONG [START/STOP] button or when you play the keyboard with Synchro standby set to ON. First Key On Overwrite recording starts as soon as you start playing the keyboard. This setting also preserves the previous lead-in data, letting you record over the original lead-in without erasing it. Punch In At The song plays back normally up to the indicated Punch In measure (set by the [3LM] buttons), then starts overwrite recording at that Punch In measure.
1 2 3 4 5 6 7 8
F
G
H
I
Calls up the SONG display, from which you can save the edited data.
J
When this is set to ON, you can use the sostenuto (center) pedal to control the punch-in and punch-out points. Press and hold down the sostenuto pedal to record. Recording stops when you release the pedal. Determines the Punch Out measure -- the measure at which Punch In overwrite recording stops (when "PUNCH OUT AT" is selected).
Determines the measure at which Punch In overwrite recording starts (when "PUNCH IN AT" is selected).
These settings determine how recording will stop as well as what happens to previously recorded data. Replace All This deletes all data following the point at which recording is stopped. Punch Out When the Pedal Punch In/ This maintains all data following the point at which recording is stopped. Out function is set to ON, the Punch Out At current function assignment Overwrite recording continues until the indicated Punch Out measure (set by the [6LM] buttons), of the sostenuto pedal is then stops at that Punch Out measure, after which song playback continues normally. cancelled.
About Punch In/Out This feature is useful primarily for re-recording or replacing a specific section of an already recorded channel. The illustrations below indicate a variety of situations in which selected measures in an eight-measure phrase are re-recorded.
REC START setting REC END setting NORMAL REPLACE ALL NORMAL PUNCH OUT NORMAL PUNCH OUT AT=006 FIRST KEY ON REPLACE ALL FIRST KEY ON PUNCH OUT FIRST KEY ON PUNCH OUT AT=006 PUNCH IN AT=003 REPLACE ALL PUNCH IN AT=003 PUNCH OUT PUNCH IN AT=003 PUNCH OUT AT=006
Original data
1
Start/start overwrite recording *1
2
3
4
5
6
7
8
Stop recording *2
*1 When measures 1 - 2 are not overwritten, recording starts from measure 3. *2 You'll have to press the [REC] button at the end of 5 measures.
1
Start/start overwrite recording *1
2
3
4
5
Stop recording *2
Deleted
1
Start/start overwrite recording *1
2
3
4
5
6
7
8
Stop overwrite recording/ play original data
1
Start/ play back original data
2
3
4
5
6
7
8
Start playing the keys/ start overwrite recording
Stop recording *2
1
Start/ play back original data
2
3
4
5
Stop recording *2
Deleted
Start playing the keys/ start overwrite recording
1
Start/ play back original data
2
3
4
5
6
7
8
Start playing the keys/ start overwrite recording
Stop overwrite recording/ play original data
1
Start/ play back original data
2
3
4
5
6
7
8
Start overwrite recording
Stop recording *2
1
Start/ play back original data
2
3
4
5
Stop recording *2
Deleted
Start overwrite recording
1
Start/ play back original data
2
3
4
5
6
7
8 Previously recorded data Newly recorded data Deleted data
Start overwrite recording
Stop overwrite recording/ play original data
1
2
3
4
5
7
PF-1000
99
Recording Your Performances and Creating Songs-- Song Creator
Editing a Recorded Song
Whether you've recorded a song using Quick Recording, Multi Recording, or Step Recording, you can use the editing features to change the song data.
Editing Channel-related Parameters -- Channel
Calling up the operations here apply to step 4 on page 94. To call up the display shown below, use the [BACK]/[NEXT] buttons.
Quantize
Quantize lets you "clean up" or tighten the timing of a previously recorded channel. For example, the following musical passage has been written with exact quarter-note and eighth-note values.
Even though you think you may have recorded the passage accurately, your actual performance may be slightly ahead of or behind the beat. [. . . ] Lot 8, Jalan Perbandaran, 47301 Kelana Jaya, Petaling Jaya, Selangor, Malaysia Tel: 3-703-0900
BRAZIL
Yamaha Musical do Brasil LTDA. Rebouças 2636, São Paulo, Brasil Tel: 011-853-1377
DENMARK
YS Copenhagen Liaison Office Generatorvej 8B DK-2730 Herlev, Denmark Tel: 44 92 49 00
PHILIPPINES
Yupangco Music Corporation 339 Gil J. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551
ARGENTINA
Yamaha de Panamá S. A. Sucursal de Argentina Viamonte 1145 Piso2-B 1053, Buenos Aires, Argentina Tel: 1-4371-7021
FINLAND
F-Musiikki Oy Kluuvikatu 6, P. O. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA PF1000E1
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA PF1000E1 will begin.