User manual YAMAHA PM3500M

[. . . ] Operation in the INPUT UNIT screen · When an LMY2-MLAB card is detected, the parameter display will be the same as for the LMY2-ML. When an LMY4-MLF card is detected, the gain adjustment knob (+10 to ­68 dB, steps of 1 dB), +48V button (phantom power on/off), and ø button (phase reversal on/off) for each channel will be displayed. [. . . ] · If you want to make virtual connections so that eight LMY2-MLAB or LMY4-MLF cards are installed in an AI8 input unit, click the UNIT SELECT button to open the UNIT SELECT window. In this window, clicking the AI8-ML8AB button will specify virtual connections in which eight LMY2-MLAB boards are installed in the AI8, and clicking the AI8-ML8F button will specify virtual connections in which eight LMY4-MLF boards are installed in the AI8. · If you want to virtually connect an LMY2-MLAB or LMY4-MLF to an AI8 input unit, click the card assignment button for the corresponding slot to open the CARD SELECT window. In this window, clicking the LMY2-MLAB button will virtually connect the LMY2-MLAB to the selected slot, and clicking the LMY4-MLF button will virtually connect the LMY4-MLF to the selected slot. Automatic correction of input from an LMY4MLF card Because signal processing on the LMY4-MLF card is nineteen samples ahead of other two-channel cards, a nineteen-sample delay is now automatically inserted into the input channel in order to match the input signal timing from other cards. Note: · When you paste the SEND parameter, the PAN parameter of MIX SEND will not be pasted if VARI PAN LINK HOLD is on and the paste-destination's VARI PAN LINK is on. If VARI PAN LINK HOLD is off, the paste-destination's VARI PAN LINK will be turned off, and the PAN parameter of MIX SEND will also be pasted. · When you paste the PAN/BAL parameter, the PAN/BAL parameter will be pasted to the PAN of MIX SEND if VARI PAN LINK HOLD is on and the paste-destination's VARI PAN LINK is on. If VARI PAN LINK HOLD is off, the paste-destination's VARI PAN LINK will be turned off, and the PAN parameter of MIX SEND will not be pasted. · Similarly, a VARI PAN LINK HOLD button has also been added to the CH COPY screen. Time code event correction When scenes are being recalled via time code, there are situations in which (depending on the content of the scene) recall is not possible if recall is specified at an interval shorter than three frames, even if scene recall is occurring no more frequently than five scenes within three seconds. [. . . ] · Similarly, a VARI PAN LINK HOLD button has also been added to the CH COPY screen. Time code event correction When scenes are being recalled via time code, there are situations in which (depending on the content of the scene) recall is not possible if recall is specified at an interval shorter than three frames, even if scene recall is occurring no more frequently than five scenes within three seconds. If a message of "TIME CODE: EVENT RECALL SKIPPED!" is displayed when the time code event is executed, try increasing the recall interval slightly. [. . . ]