User manual YAMAHA PM5000

[. . . ] Owner's Manual E Explanation of Graphical Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The above warning is located on the rear of the unit. IMPORTANT SAFETY INSTRUCTIONS 1 2 3 4 5 6 7 Read these instructions. Install in accordance with the manufacturer's instructions. [. . . ] At this point you could use the [INC] and [DEC] keys to select "TM" (time) for editing rather than the date, but the date parameters will appear first since they are usually edited first. DT2003/06/10 NOTE New CompactFlash memory cards must be formatted before use. CompactFlash memory cards are formatted in accordance with DOS (FAT16) format, and files are handled in CSV format. Data saved to memory cards can then be loaded into a personal computer via a card reader or similar device, and the data can then be edited in a standard spreadsheet application (file names comply with the DOS standard: 8 characters plus the ". CSV" extension). 1 2 Press the [ENTER] key and the year value will flash. The flashing value can be edited by using the [INC] and [DEC] keys. When a value has been edited as required press [ENTER] to confirm the entry and move on to the next value. DT2003/06/10 Press [ENTER] after selecting the above display and one of the displays shown below will appear. Select LOD (load), SAV (save), DEL (delete), or FMT (format), as necessary, and press the [ENTER] key. LOD:YAMAHA01 SAV:ALL 3 DEL:YAMAHA01 Once the day (rightmost) value has been edited and the [ENTER] key pressed, the date is confirmed and "DT" will flash again. Press the [INC] or [DEC] key and the display will change to the time parameters: hour, minutes, and seconds. The leftmost "hours" value will be flashing and ready for editing. In the same way as in the date display, edit each value as necessary and press [ENTER] to move on to the next value. When the final "seconds" value has been edited and the [ENTER] pressed the time entry is confirmed and complete. TM 15:45:32 FMT:FORMAT NOTE When the load or delete functions are selected the name of the CSV file on the card will appear on the display (the ". CSV" extension will not be shown). NOTE If a memory card is not inserted, the parameter display will not change even when you press [ENTER]. NO T E If the backup battery runs out the date and time will be reset to 2001/1/1, 0:00:00, and will begin keeping time from that value. 59 Digital Control Section Format 2 If you selected FMT and pressed [ENTER] in step 1, above, the following confirmation message should appear. SURE?Y:1 N:3 Number Usable Filename Characters (selected in sequence by the number key) Key 1 2 3 4 5 !#$%&`()-@ ABC DEF GHI JKL MNO PQRS TUV WXYZ 3 6 Press the alpha-numeric [1] key to begin formatting the card, or [3] to abort the operation. Never remove a memory card from the card slot during a format operation. The following display will appear while the card is being formatted. Executing 7 8 9 4 When the file name has been entered press the [ENTER] key. The following confirmation message will appear on the display. SURE?Y:1 N:3 NO T E CompactFlash memory cards can also be formatted using a computer, but we recommend that you format cards using the PM5000 format function to minimize the possibility of load errors. NOTE If a file with the same name already exists the message will confirm that it is OK to overwrite the existing file ­ "SURE" in the above will appear as "OVWR". Data Save 2 5 After selecting SAV and pressing [ENTER] in step 1, above, you will need to select the type of data to be saved (below) and then press [ENTER] to confirm. · ALL: All PM5000 data (scene memory, setup memory, program change table). · SCENE: Scene memory data (scenes 010 ~ 999). · SETUP: setup memory data (page 57). · TABLE: The program change table data set up via utility function parameter number U28. Press the alpha-numeric [1] key to begin saving to the card, or [3] to abort the operation. Never remove a memory card from the card slot during a save operation. The following display will appear while the data is being saved. Executing Data Load 2 3 After selecting LOD and pressing [ENTER] in step 1, above, you will need to select the data file you want to load from the memory card. LOD:YAMAHA01 Whatever data type you select you will need to enter a name of up to 8 characters for the file to be saved. Enter a name so you can easily identify the data later. SAV:NEW_DATA 3 When you have selected the file to be loaded press the [ENTER] key. The following confirmation message will appear. SURE?Y:1 N:3 NO T E File names are entered using capital letters only. The character set available for file names is somewhat different from the set available for scene titles (refer to the chart below). [. . . ] Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 BELGIUM/LUXEMBOURG Yamaha Music Central Europe GmbH, Branch Belgium Rue de Geneve (Genevastraat) 10, 1140 - Brussels, Belgium Tel: 02-726 6032 ASIA THE PEOPLE'S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co. , Ltd. 25/F. , United Plaza, 1468 Nanjing Road (West), Jingan, Shanghai, China Tel: 021-6247-2211 U. S. A. Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. [. . . ]