User manual YAMAHA PM5DV2

[. . . ] PM5DV2/DSP5D Editor Owner's Manual Owner's Manual Special Notices · The software and this owner's manual are the exclusive copyrights of Yamaha Corporation. · Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. · Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use. · Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software. [. . . ] Select the output port in the left side of the screen, and the input port in the right side of the screen. Except for the fact that you can resize the window, the basic operation is the same as in the PM5D's OUTPUT INSERT PATCH screen. DIRECT OUTPUT PATCH page Here you can select the output port that will directly output each input channel. Except for the fact that you can resize the window, the basic operation is the same as in the PM5D's DIRECT OUTPUT PATCH screen. 42 PM5DV2/DSP5D Editor Owner's Manual PATCH LIST page Here you can view and edit the input patch and output patch settings. Input patch, output patch, and channel name data that was written to a CSV file by the PM5D itself can also be loaded into this page. Conversely, the settings in this page can be written to a CSV file that can be loaded into the PM5D. NOTE · VIRTUAL SOUNDCHECK is a display-only function. · In DSP5D Editor, VIRTUAL SOUNDCHECK will be lit only if you operate the PM5D with the PM5D and DSP5D connected. 43 PM5DV2/DSP5D Editor Owner's Manual 5 6 1 2 3 4 A Input channel number Input channel name This is the number and name of the input channel. You can click the channel name box to edit the name in this page. B Input port This shows the input port assigned to the input channel. You can click this box and choose the input port from the popup menu that appears. C Output channel number Output channel name This is the number and name of the output channel. You can click the channel name box to edit the name in this page. D Output port This shows the output port assigned to the output channel. You can click this box and choose the output port from the popup menu that appears. E IMPORT (Import a CSV file) Input patch, output patch, and channel name data from CSV files written by the PM5D can be loaded into the PATCH LIST page by clicking this button. When you click this button, a dialog box will appear as shown at right, allowing you to specify the folder containing the CSV files you want to load. Specify the folder that contains CSV files, and click the OK button. If the specified folder contains CSV files, that data will be loaded into the PATCH LIST page. NOTE If the specified folder does not contain the necessary CSV file, the settings in the PATCH LIST page will not change. For example if the folder contains only an input patch CSV file, only the input patch settings of the PATCH LIST page will be loaded, and the remaining settings will not change. F EXPORT (Export a CSV file) By clicking this button, input patch, output patch, and channel name data can be written to a CSV file that can be loaded by the PM5D. When you click this button a dialog box will appear, allowing you to specify a folder for the exported CSV files. Specify the folder in which the CSV files will be saved, and click the OK button. Separate CSV files containing the input patch, output patch, and channel name data will be saved in the folder you specified. You can use a memory card to load these CSV files into the PM5D. 44 PM5DV2/DSP5D Editor Owner's Manual Surround Editor window Here you can make surround panning settings for the two currently selected input channels. 1 2 3 4 5 A SELECT (Channel selection) This area displays the name and number of the two channels selected for operations (two adjacent odd-numbered/even-numbered input channels, a ST IN channel, or an FX RTN channel). To switch channels, use the SELECT button or the / buttons at left and right. You can also edit the channel name in the text box. B PAIR Indicates the pair status of the two selected channels. If an input channel is selected, you can click the heart symbol to enable/disable pairing. C LINK Specifies whether movement of the sound image will be linked for the two selected channels. If this button is on, the sound image of the two channels will be linked according to the link pattern you select using LINK PATTERN SELECT buttons 1­8. D LINK PATTERN SELECT These buttons select link patterns 1­8. [. . . ] 39 Selective recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SET ALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Set Default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]