User manual YAMAHA PMTL31H35

[. . . ] 2 PACKING LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 NAMES OF PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 SCREEN SIZE AND SETTING-UP DISTANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Never hang from the projector or the ceiling bracket. English Hanging from the projector or the ceiling bracket could cause the projector or the ceiling bracket to fall and injure someone. 10. Do not install the projector in a location near an air conditioning vent or in a location subject to vibration. Such conditions could have an adverse effect on the projector, and could even cause a fire or electric shock. 11. Do not install the projector in a location that is subject to high levels of dust or humidity. Dust accumulating inside the projector could cause a short circuit that in turn could cause a fire or electric shock. 12. Do not install the projector in a location that is exposed to direct sunlight or in a location that is subject to extreme fluctuations in temperature (such as near an air conditioner). Such conditions can cause the projector housing to warp or to become discolored. 13. Do not wipe the exterior of the ceiling bracket with benzene, paint thinner or cleaning compounds. Doing so could damage the finish. 14. Special techniques and experience are essential when installing the projector using this bracket. Request that your dealer arrange to have the equipment installed. The customer should never attempt to suspend the projector from the ceiling. Improper installation could cause the ceiling bracket or the projector to fall and injure someone. 15. Once the projector is installed, safety checks should be conducted on a regular basis. If the projector is used over an extended period of time, screws can become loose and the installation can become weaker due to the passage of time, vibration, etc. E-3 PACKING LIST Check that all of the following parts are included. PMT-L31 Ceiling bracket x 1 PMT-H35 Ceiling bracket x 1 Adjustment pole locking screws (M5) x 4 Common parts (The following parts are provided with each bracket. ) Projector mounting adapter x 1 Projector mounting screws (M6, pan head) x 4 Vertical angle adjustment screws (M6, hexagonal head) x 4 Safety brackets x 2 Safety bracket mounting screws (M4, pan head) x 4 Safety wires x 2 Safety wire mounting screws (M4, pan head) x 4 Installation Manual x 1 E-4 NAMES OF PARTS PMT-L31 English Horizontal angle adjustment screws Ceiling bracket Mounting guide pin Vertical angle adjustment screws (There are also screws on the opposite side. ) Tilt angle adjustment screws (There are also screws on the opposite side. ) Projector mounting adapter E-5 PMT-H35 Ceiling bracket Height locking screw Horizontal angle adjustment screw (four in total) Height adjustment pole Mounting guide pin Vertical angle adjustment screws (There are also screws on the opposite side. ) Tilt angle adjustment screws (There are also screws on the opposite side. ) Projector mounting adapter E-6 [Top View] PMT-L31 [Front View] DIMENSIONS 495 mm (19-1/2 inch) Ø9 x 13 mm (Ø3/8 x 1/2 inch) (elliptical hole) 82 mm (3-3/16 inch) 382 mm (15 inch) 360 mm (14-3/16 inch) 124 mm (4-7/8 inch) 155 mm (6-1/8 inch) 196 mm (7-3/4 inch) 170 mm (6-11/16 inch) 140 mm (5-1/2 inch) 139 mm (5-1/2 inch) Ø10 x 13 mm (Ø3/8 x 1/2 inch) (elliptical hole) 10° 10° Projector mounting adapter with the DPX-1000 installed Ø9 mm (Ø3/8 inch) (hole) 14. 5 mm (5/8 inch) 297. 4 mm (11-3/4 inch) Ø9 mm (Ø3/8 inch) (hole) Ø10 mm (Ø3/8 inch) (hole) 120 mm (4-3/4 inch) 156 mm (6-1/8 inch) 17 mm 13 mm (3/4 inch) (1/2 inch) Ø10 mm (Ø3/8 inch) (hole) 10° 10° [Top View] [Front View] 226 mm (8-7/8 inch) 162 mm (6-3/8 inch) 495 mm (19-1/2 inch) Projection direction 184. 5 mm (7-5/16 inch) 258 mm (10-3/16 inch) PMT-H35 844 to 1414 mm (33-3/16 to 55-11/16 inch) 787 to 1357 mm (30-15/16 to 53-3/8 inch) Ø8. 8 mm (Ø3/16 inch) (fully penetrating holes) 210 mm (8-5/16 inch) 140 mm (5-1/2 inch) with the DPX-1000 installed 176 mm (6-13/16 inch) 236 mm (9-5/16 inch) 10 mm (3/8 inch) 184. 5 mm (7-5/16 inch) 30 mm (1-3/16 inch) 120 mm (4-3/4 inch) 200 mm (8-7/8 inch) Ø10 x 13 mm (Ø3/8 x 1/2 inch) (elliptical hole) 963 to 1533 mm (37-7/8 to 60-3/8 inch) English E-7 Projection direction SCREEN SIZE AND SETTING-UP DISTANCE · The chart and illustration below show the relationship between the projection distance and the screen size. Please refer to these values for installation of the projector. · Please align the projected image and the screen using the "V. Refer to the owner's manual of the projector for detailes. When using a 16:9 screen Screen size (inch) 60" 70" 80" 90" 100" 110" 120" 150" 200" Approximate projection distance (m [feet]) 1. 8 to 2. 9 [5. 9 to 9. 5] 2. 1 to 3. 35 [6. 9 to 11] 2. 4 to 3. 85 [7. 9 to 12. 6] 2. 7 to 4. 35 [8. 9 to 14. 3] 3. 0 to 4. 85 [9. 8 to 15. 9] 3. 3 to 5. 35 [10. 8 to 17. 6] 3. 6 to 5. 8 [11. 8 to 16. 4] 4. 55 to 7. 3 [14. 9 to 24] 6. 05 to 9. 75 [19. 8 to 32] When using a 4:3 screen Screen size (inch) 60" 80" 100" 120" 200" Approximate projection distance (m [feet]) 1. 65 to 2. 65 [5. 4 to 8. 7] 2. 2 to 3. 5 [7. 2 to 11. 5] 2. 75 to 4. 4 [9 to 14. 4] 3. 3 to 5. 3 [10. 8 to 17. 4] 5. 5 to 8. 8 [18 to 28. 9] *Distance and dimensions should be used as a guide for installation. The actual distance will vary depending on projection conditions. < When using a 16:9 screen > Distance from center of ceiling bracket to wall: Approx. 43 cm 60" 80" 1. 8 to 2. 9 2. 4 to 3. 85 3. 0 to 4. 85 100" 120" Distance from ceiling surface to center of lens: PMT-L31: Approx. 26 cm PMT-H35: 96 to 153 cm Screen size 200" Distance from center of ceiling bracket to front edge of projector: Approx. 24 cm 3. 6 to 5. 8 6. 05 to 9. 75 Approximate projection size (m) Notes · The projection distance is the horizontal distance from the surface of the projector lens to the surface of the screen. · Although the vertical angle of the ceiling bracket can be adjusted in a range of ±15°, a large angle adjustment may distort the projected image. We recommend you to adjust both the angle of the ceiling bracket and the angle of the screen. E-8 PMT-H35 height adjustment English The height adjustment pole for the PMT-H35 has holes spaced 3 cm apart that can be used to adjust the height. When the bracket is shipped from the factory, the pole is set at the shortest height. [. . . ] · Use M8 bolts (commercially available). Reinforcing plate Washer Ceiling beam Nut and washer Bolt (M8) (Use the reinforcing plate, bolts, nuts and washers commercially available. ) When installing to a concrete ceiling 1 Install anchor nuts in the ceiling. 2 Screw the bolts into the anchor nuts. Anchor nut Cautions · Make sure that the anchor nuts are strong enough to bear the weight of the projector and the ceiling bracket. · Use M8 bolts (commercially available). Bolt (M8) (Use the anchor nuts, bolts, nuts and washers commercially available. ) Ceiling Nut and washer E-10 INSTALLING THE PROJECTOR English 1 Attach the projector mounting adapter onto the projector. Align the holes in the mounting adapter with the holes in the bottom of the projector, and then use the four projector mounting screws (M6, pan head) provided to securely attach the mounting adapter to the projector. Projector mounting screws (M6, pan head) Bottom of the projector Projector mounting adapter Caution · Do not tighten the projector mounting screws excessively. Excessive tightening could damage the mount and cause the projector to fall. 2 Attach the safety wire. Use the four safety wire mounting screws (M4, pan head) provided to attach the safety wires to the projector mounting adapter, as shown below. [. . . ]