User manual YAMAHA PSR-5700 2

[. . . ] Advanced Features Programmieranleitung Fonctions avancées Características avanzadas MANUAL DE INSTRUCCIONES MODE D'EMPLOI BEDIENUNGSANLEITUNG OWNER'S MANUAL The PSR-5700 Advanced Features manual contains operating instructions for the instrument's more complex and advanced features. If you are yet familiar with PSR-5700's basic features and the way it works in general, we recommend that you go through the PSR-5700 Getting Started manual prior to attempting to use the features described in this manual. Contents The Sequencer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 s Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 s Deleting Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The display shown to the left will appear: TO DISK TO DISK _ 00:N_FILE00 Size:---k NO YES DISK IN USE FROM DISK 42 TO DISK _ 01:N_FILE01 ­ + Size:---k NO YES ­ + TO DISK _ 01:N_FILE01 ­ + Size:---k NO YES ­ + With the cursor located under the file number parameter at the left of the lower display line (use the [>] button to move the cursor if necessary), use the left [-] and [+] buttons to specify a number for the file to be saved (00 -- 99). If a file with the selected number already exists on the disk, the name of the selected file will be displayed to the right of the number (if no name has been assigned, "N_FILE" will appear), and the size of the file in kilobytes (approximate) will be shown on the upper display line. The cursor can be moved to the various character positions in the file name (8 characters maximum) and the name edited by selecting the appropriate characters for each position via the left [-] and [+] buttons. When the file number has been specified, press the right [+] button under "YES" on the display to execute the save operation (or press the [-] button under "NO" on the display to cancel the operation). "Don't remove disk" will appear while the data is being saved, and the amount of remaining data to be saved will be displayed in arbitrary units on the upper display line. "Completed!" will appear when the data has been successfully saved. The data saved to disk is as follows: · Instrument setup (condition) data. · Pad assignment data (Multi, Tempo, and Percussion assignments). · Sequencer song data. See page 48 for a list of error messages that may appear during disk save. Unformat Disk !NO YES ­ + If you insert a disk that has not been formatted into the drive, the display shown to the left will appear when the [TO DISK] button is pressed: Press the [+] button under "YES" on the display to format the disk (see "5. FORMAT DISK" on page 47). The PSR-5700 identifies and handles disk files by number rather than the file name. If you save to a file number that already contains data, the original data will be erased and replaced by the new data. IMPORTANT 43 [F5] Disk The [FROM DISK] Button Press this button when you want to re-load a previously saved file from floppy disk. The data loaded is the same as that saved by the TO DISK operation described above. When the [FROM DISK] button is pressed the display shown to the left will appear: TO DISK FROM DISK _ 00:N_FILE00 Size: 35k NO YES DISK IN USE FROM DISK FROM DISK _ 01:N_FILE01 ­ + Size: 35k NO YES ­ + FROM DISK _ 01:N_FILE01 ­ + Size: 35k NO YES ­ + Use the left [-] and [+] buttons to select the number of the file to load (00 -- 99, file numbers that contain no data will not be displayed). The name of the selected file will be displayed to the right of the number, and the size of the file in kilobytes (approximate) will be shown on the upper display line. When the file number has been specified, press the right [+] button under "YES" on the display to execute the load operation (or press the [-] button under "NO" on the display to cancel the operation). "Don't remove disk" will appear while the data is being loaded, and the amount of remaining data to be loaded will be displayed in arbitrary units on the upper display line. "Completed!" will appear when the data has been successfully loaded. The [FROM DISK] button allows all data in a file to be loaded at once. To load individual data groups use the FROM DISK function described on page 45. See page 48 for a list of error messages that may appear during a disk load operation. 44 [F5] Disk The [F5] DISK Functions The [F5] DISK function accesses a range of functions that are used for storage and retrieval of floppy disk data. Not Found Disk ! If you select the [F5] when no disk is present in the drive, the "Not Found Disk!" error message will appear on the display. 1 FROM DISK · First Screen Procedure: ­ + `FROM DISK Size: 35k 00:N_FILE00 : AllData ­ + · Second Screen (When SEQUENCER selected) `FROM DISK Size: 2k Song=1 -> Song=1 ­ + ­ + (When optional disk "AllData" or "Disk Style" selected) `FROM DISK 1-16Slow ­ + Size: 29k Use the left [-] and [+] buttons to select the number of the file to load (00 -- 99). The name of the selected file will be displayed to the right of the number, and the size of the file in kilobytes (approximate) will be shown on the upper display line. [. . . ] 1 01H (1up) 7FH (1down) 01H 00H (Normal) ORCH. 2 01H (1up) 7FH (1down) O O X X ORCH. 2 VOICE O MB VOICE O X X X OCTAVE CHANGE R R X O O X X (3) 3BYTE DATA FORMAT (O: Transmit & receive. R: Receive only) 11110000 01000011 01110110 00000100 0gggnnnn 0ccccccc 0ddddddd 0ddddddd 0ddddddd 11110111 3BYTE DATA F0H 43H 76H 04H gn cc dd1 dd2 dd3 F7H Status YAMAHA ID Substatus Section No. = 6 (Portable Keyboard) g=2, n: Local Device Number cc: Controller number Data1 Data2 Data3 EOX 2AH 00H LCD SW 1 OFF (When released) 01H LCD SW 1 ON (When pressed) 02H LCD SW 2 OFF (When released) 03H LCD SW 2 ON (When pressed) 04H LCD SW 3 OFF (When released) 05H LCD SW 3 ON (When pressed) 06H LCD SW 4 OFF (When released) 07H LCD SW 4 ON (When pressed) 2BH 67H : 7FH 00H : 19H 2CH 00H O X DOC/GM1 Remote g 2 cc dd1 dd2 00H~07H 00H~07H 00H~07H 00H~07H 00H~07H 00H~07H 00H~07H 00H~07H 00H~07H 00H~07H 00H~07H dd3 Parameter Function 01H 01H 01H 01H 01H 01H 01H 01H 01H 01H 01H RHYTHM BASS CHORD2 CHORD1 ORCH. Values for all parts transmitted when reverb is turned ON. 252 427. 5Hz PITCH TUNE : 2's complement of 7 bits. [. . . ]