User manual YAMAHA PSR-6

[. . . ] The Data List is available for downloading from the Yamaha Manual Library at: http://www. yamaha. co. jp/manual/ EN Appendix Reference Quick Guide Setting Up SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc. , is used, please observe all safety markings and instructions that accompany the accessory product. [. . . ] Refer to the Voice List on page 64. Voice Settings Playing Different Voices with the Left and Right Hands--Split In the Split mode you can play different Voices to the left and right of the keyboard "Split Point. " The main and Dual Voices can be played to the right of the Split Point, while the Voice played to the left of the Split Point is known as the "Split Voice" Split Point Select a Split Voice You can select a different Split Voice by following the procedure outlined below. 1 Press and hold the [SPLIT] button for longer than a second. Voice" appears in the display for a few seconds, then the Split Voice will appear. The currently selected Split Voice 039 FngrBass 001 Split Voice Main Voice and Dual Voice NOTE Play the Split Voice Press the [SPLIT] button to turn the Split function on. When Split is on you can play a Split Voice to the left of the Split Point. When you don't want to play a Split Voice, press the [SPLIT] button to turn Split off. · You can also access the Split Voice setting display by pressing the [FUNCTION] button several times, then selecting the Split Voice. 2 Select a Split Voice Select the desired Split Voice by using the number buttons [0]­[9], [+], [-]. Refer to the Voice List on page 64. Reference ir Appears when Split is on. NOTE · The Split Point setting can be changed as required (page 47). 46 PSR-6/YPT-320 Owner's Manual Voice Settings Setting the Split Point The Split Point setting can be changed as desired. Split Point--default setting: 54 (F#2) Adjusting the Voice volume The Voice volume can be individually adjusted for the Main, Dual, and Split Voices. 1 96 Press the [FUNCTION] button a number of times until the required Voice volume item appears. Select "M. Volume" for Main Voice volume, "D. Volume" for Dual Voice volume, or "S. Volume" for Split Voice volume. 36 48 60 72 84 The initial default Split Point is key number 54 (the F#2 key), but you can change it to another key. When you change the Split Point, the auto accompaniment range also changes. 100 M. Volume 1 Press the [FUNCTION] button a number of times until "SplitPnt" appears. Currently selected Split Point Split Point 2 Set the Voice volume by using the number buttons [0]­[9], [+], [-]. NOTE 054 SplitPnt 001 · Press the [+] and [-] buttons simultaneously to instantly reset the value to its default setting. The default setting varies depending on the Voice. Split Point 2 Set the Split Point by using the number buttons [0]­[9], [+], [-]. NOTE · Press the [+] and [-] buttons simultaneously to instantly reset the value to its default setting (54 or F#2). PSR-6/YPT-320 Owner's Manual 47 Reference Voice Settings Setting the Metronome Beats per Measure, and the Length of Each Beat In this example we'll set up a 3/4 time signature. Setting the Metronome Volume 1 1 Press the [FUNCTION] button a number of times until "MetroVol" appears. Press and hold the [METRONOME] button for longer than a second to select the number of beats per measure function "TimeSigN". 100 MetroVol Metronome Volume Hold for longer than a second. Number of beats per measure. 2 Set the metronome volume by using the number buttons [0]­[9], [+], [-]. 004 TimeSigN 2 Use the number buttons [0]­[9], [+], [-] to select the number of beats per measure. A chime will sound on the first beat of each measure while the other beats will click. All beats will simply click with no chime at the beginning of each measure if you set this parameter to "00". Simply use the [REW] and [FF] buttons to select the desired measures, pressing the [A-B REPEAT] button for each point, then start playback. · If you want to set the start point "A" at the very beginning of the Song press the [A-B REPEAT] button before starting playback of the Song. Lit--track contains data. Unlit--track is muted or contains no data. You can stop repeat playback at any time by pressing the [A-B REPEAT] button. An "oFF REPEAT" message appears on the display. The A-B REPEAT mode will be canceled and normal playback of the Song will continue. NOTE · The A-B Repeat function will be canceled when you select another Song or Style mode. PSR-6/YPT-320 Owner's Manual 51 Reference Pressing one of the Track buttons [TRACK 1] or [TRACK 2] will mute the corresponding track during Song playback. Song settings Song Volume This procedure allows you to adjust the balance between Song playback and the notes you play on the keyboard by setting the volume of the playback sound. Changing the Melody Voice You can change a Song's melody Voice to any other Voice you prefer. NOTE 1 2 · You cannot change the melody Voice of a User Song. Press the [SONG] button. Press the [FUNCTION] button a number of times until "SongVol" appears. Current Song Volume 1 2 Select the Song and play it. Refer to the section "Playing Songs" on page 16. Select a desired Voice by using the number buttons [0]­[9], [+], [-]. 100 SongVol 3 Set the Song Volume by pressing the number buttons [0]­[9], [+], [-]. NOTE 004 HnkyTonk 001 · Press the [+] and [-] buttons simultaneously to instantly reset the value to its default setting (100). Tap Start Set the Tempo by using the number buttons [0]­ [9], [+], [-]. After selecting a song, you can set the Tempo by simply tapping the [TEMPO/TAP] button at the required tempo--four times for time signatures in 4, and three times for time signatures in 3. You can change the Tempo during Song playback by pressing the [TEMPO/TAP] button just twice. The selected Voice sounds when you play the keyboard. If a Song has played through and stopped during this procedure, press the [START/ STOP] button to start playback again. Reference 3 Press and hold the [VOICE] button for longer than a second. "SONG MELODY VOICE" appears in the display for a few seconds, indicating that the Voice selected in Step 2 has replaced the Song's original melody Voice. Hold for longer than a second. 52 PSR-6/YPT-320 Owner's Manual Style (Auto Accompaniment) Functions Starting Style playback The following two methods can be used to start Style playback. [. . . ] 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 THE NETHERLANDS/ BELGIUM/LUXEMBOURG Yamaha Music Europe Branch Benelux Clarissenhof 5-b, 4133 AB Vianen, The Netherlands Tel: 0347-358 040 ASIA THE PEOPLE'S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co. , Ltd. 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China Tel: 021-6247-2211 FRANCE Yamaha Musique France BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 U. S. A. Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. Tel: 714-522-9011 HONG KONG Tom Lee Music Co. , Ltd. 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 ITALY Yamaha Musica Italia S. P. A. [. . . ]