User manual YAMAHA PSR-4000E

[. . . ] SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. [. . . ] Please insert a disk. " error message will appear on the display. Write protect tab closed (unlocked -- write enabled) Load From Disk Loads the specified file from a floppy disk inserted into the PSR-4000 disk drive. If the FILE LIST display shown to the right is not showing, press the LIST LCD button to select it. Use the FILE LCD [v/w] controls to select the file to load. The name of the selected file is displayed to the right of the file number, and the size of the file appears to the right of the file name in kilobytes (approximate). If you want to select a specific type of data to load, press the PROGRAM LCD button. 90 Disk Operations The LCD [v/w] controls can now be used to select the type(s) of data to be loaded from the selected file. Data types which are turned ON are loaded. SETUP STYLE REVOICE MULTI PAD REGISTRATION CUSTOM STYLE CUSTOM VOICE All setup data -- see list on page 131. All MULTI PAD phrase, percussion, and chord data - page 36. All CUSTOM VOICE data - page 78. Press the LIST LCD button when you want to go back to the FILE LIST display. If you want to load an individual registration, style, or voice, press the INDIVIDUAL LCD button. In the INDIVIDUAL LOAD display use the DATA LCD [v/w] control to select REGIST, STYLE or VOICE, the CONTENT LCD [v/w] controls to select the individual file to be loaded, and the DEST. REGIST, CUSTOM STYLE, or CUSTOM VOICE LCD [v/w] controls to select the destination for the selected individual file. When the INDIVIDUAL mode is selected and STYLE is selected for loading, a PRE-LOAD LISTEN LCD button appears which lets you listen to the style before actually loading it. The PRE-LOAD LISTEN function will not work if there is too much style data, however. Press the LIST LCD button when you want to go back to the FILE LIST display. When the file and data types have been specified, press the EXECUTE LCD button to actually begin the load operation -- the "OK to load?" confirmation display will appear. If you want to execute the load operation press the YES LCD button (or press the NO LCD button to cancel the operation). "Don't remove disk" will appear while the data is being loaded, and the progress of the load operation will be indicated by a bar graph on the display. NOTES · Data spanning two or more disks (i. e. "split" data) cannot be loaded by using the INDIVIDUAL LOAD function. · When loading CUSTOM STYLE or CUSTOM VOICE data -- not in the INDIVIDUAL mode -- all data will be loaded even if the loaded file contains empty styles or voices. · In the case of the custom style load function, SFF (optional style file format) disks can also be loaded. 91 Disk Operations Save To Disk Saves the data listed below to a floppy disk inserted into the PSR-4000 disk drive. NOTES · If an unformatted disk or a disk which has not been formatted for use with the PSR-4000 is inserted, the "Wrong disk type or format!Format disk?" confirmation message will appear when the SAVE TO DISK function is selected. Press YES to format the disk or NO to cancel. If the FILE LIST display shown to the right is not showing, press the LIST LCD button to select it. [. . . ] Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Failure to follow instructions could void your FCC authorization to use this product in the USA. [. . . ]